Top 9 Rox Pivoting Risers – Powersports Handlebars

As an Amazon Associate I earn from qualifying purchases.

1. Rox Speed FX

#ad

Rox Speed FX Pivot Handlebar 2" Riser 7/8"Handlebar Black 1R-P2SS

#ad
Rox Speed FX #ad - These will also work on snowmobiles that have flat plate steering stems. They will clamp into 7/8" stems and clamp stock 7/8" handlebars. These risers allow you to pivot your bars forward and backward for your ultimate comfort.

Patented by the us patent and trademark office under us patent #6, 920, 806. Two inch pivoting handlebar riser for 7/8" bars. Patented pivoting riser works on any machine with 7/8" bars. Dual rotation points allow rider to select optimum riding position for comfort and control. 10 minute install on most machines. Made in the U. S. A. Sold in pairs. Note: double-check length of cables and brake lines for proper fit; extended length cables or brake lines may be required for proper operation. These universal risers work great on ATVs, dirt bikes, and motorcycles with a 7/8" bar.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height6 Inches
Length11 Inches
Weight0.65 Pounds
Width3 Inches
Part Number1RP2SS
Model1R-P2SS

2. Rox Speed FX

#ad

Rox Speed FX 2in. Pivoting Riser for 7/8in. Handlbar, Natural Aluminum 1R-P2SSN

#ad
Rox Speed FX #ad - Patented design pivoting risers are incredibly universal with a twopiece design that allows them to be clamped to any motor vehicle with 7/8in. Available in black or new natural aluminum finish. Handlebar clamps. Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment. Out-board positioning also makes them incredibly durable.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height1.4 Inches
Length5.8 Inches
Weight0.7 Pounds
Width11.6 Inches
Part Number1R-P2SSN
Model1R-P2SSN

3. Rox Speed FX

#ad

Black, Rox Speed FX 1R-AV2SEK Elite Series Anti-Vibration 2in. Pivot Risers

#ad
Rox Speed FX #ad - Or 11/8in. Dual rotation points allow rider to select optimum riding position for comfort and control. Provides a slight shock damping effect to help protect rider and machine. Rox elite series risers allow you to clamp 7/8in. Independent left and right risers adapt to any handlebar clamp width and herefore virtually any machine with 7/8in. Anti-vibe design reduces vibration in bars. Bar clamps. Taper bars.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height2.4 Inches
Length5.8 Inches
Weight1.4 Pounds
Width11.6 Inches
Part Number1R-AV2SEK

4. Rox Speed FX

#ad

Rox Speed FX Street Riser 2" / 1 Black

#ad
Rox Speed FX #ad - Sold in pairs. Chrome risers come standard with chrome bolt head buttons. 2" center to center height. Universal 2-piece design attaches to nearly any bar or clamping area with a 1" diameter. Machined from 6061-t6 billet aluminum and made for 1" diameter handlebars.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height2.4 Inches
Length6.4 Inches
Weight1.02 Pounds
Width5.9 Inches
Part Number4R-P2CC01
Model4R-P2CC01

5. Rox Speed FX

#ad

Rox Speed FX 4R-P4RX-01 Patriot Series Pivoting Risers, Black, 4in.

#ad
Rox Speed FX #ad - Diameter handlebars and an open mounting area. Patented pivoting handlebar risers mount on nearly any V-Twin with 1in. Bar clamp on the top side. Bottom fits 1in. Risers can be positioned forward, backward or anywhere in between to allow the rider to truly customize the feel of their bike. Easy installation: remove the current bar, place the stem of the risers where the bar was located previously then tighten it down; place the handlebar in the top side of the risers and tighten all bolts down securely. Handlebar clamps; 1in. Constructed from aircraft-grade aluminum 6061-T6.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height2.6 Inches
Length7 Inches
Weight1.45 Pounds
Width5.8 Inches
Part Number4R-P4RX-01

6. Rox Speed FX

#ad

Rox Speed FX Rox 2in. Pivoting Handlebar Riser for 1 1/8in. Handlebars 1R-P2PP

#ad
Rox Speed FX #ad - Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers! These risers will mount on essentially any machine that has a handlebar that measures 1 1/8" at the bar clamps. Accepts 1 1/8" handlebar 28mm, 2" 51mm Center-to-Center Rise. Made in the uSA with Lifetime Warranty. Pivots backward/forward based on Rider Preference 1 1/8" Stem 28mm.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height2.3 Inches
Length5.7 Inches
Weight0.9 Pounds
Width5.9 Inches
Part Number1RP2PP

7. Rox Speed FX

#ad

Black, 4in. Rise, Rox Speed FX 4R-P4RX01 Pivoting Handlebar Riser

#ad
Rox Speed FX #ad - Diameter handlebars. Diameter. Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes. Available in chrome or anodized black. Chrome risers come standard with chrome bolt head buttons. Universal 2-piece design attaches to nearly any bar or clamping area with a 1in. Machined from 6061-t6 billet aluminum, made for 1in.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height2.6 Inches
Length7 Inches
Weight1.38 Pounds
Width5.8 Inches
Part Number4R-P4RX-01

8. Rox Speed FX

#ad

Rox Speed FX Rox 1 3/4in. Pivoting Handlebar Riser for 1 1/8in. Handlebars 3R-P2PPL

#ad
Rox Speed FX #ad - Stem clamp and a 1-1/8in. Super low profile 1-3/4in. Center-to-center riser devolved to fit for bmw f800gs or for KTM 990 Adventure with stock lines and cables; also fits many other street, off-road, and dual sport models with a 1-1/8in. Features an 8mm tap hole in the end of the posts to mount accessories. Cnc-machined from billet 6061 T6 aluminum, then clear anodized. Handlebar clamps and can be pivoted to desired fore and aft location to achieve ideal riding position. Handlebar. Engineered and tested for maximum strength and durability.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height1.9 Inches
Length6.2 Inches
Weight0.9 Pounds
Width5.8 Inches
Part Number3RP2PPL
ModelTRTB7625

9. Rox Speed FX

#ad

Rox Pivoting Bar Riser 2" Silver 1R-P13R-2125

#ad
Rox Speed FX #ad - Or 1-1/4in. Also fits many other street, off-road, and dual sport models with a 1-1/8in. Made in the U. S. A. Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position. Or 1-1/4in. Handlebar. Cnc-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks. Stem clamp and a 1-1/8in. Engineered and tested for maximum strength and durability.
BrandRox Speed FX #ad
ManufacturerRox Speed FX #ad
Height1.9 Inches
Length6 Inches
Weight1.21 Pounds
Width5.6 Inches
Part Number1R-P13R-2125
ModelTRTB7622