As an Amazon Associate I earn from qualifying purchases.

Holds the yoke in place -- use the pinion wrench while applying torque. Tighten up -- use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. It can also handle other high torque tasks, like crush sleeves.
It will help you loosen even the most stubborn pinion nuts. Plus, you might need multiple. There are multiple slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners. Utilize this tool to handle the insane amount of torque needed to get the job done. Additional 1/2" square socket -- other yoke flange wrenches only have one and round out over time. For leverage, grab a 1/2” breaker bar or 3/4” drive tool.







1. Sunsong
#ad
Sunsong 8401375 Rack and Pinion Seal Kit
#adSunsong #ad - Package dimensions: 5. 1 l x 22. 5 h x 14. 9 w centimeters. Made in China. Fit type: Vehicle Specific. Contains the quality components required for steering Unit repair.More information #ad
Brand | Sunsong #ad |
Manufacturer | Sunsong #ad |
Height | 1 Inches |
Length | 9.5 Inches |
Width | 6 Inches |
Part Number | 8401375 |
Model | 8401375 |
Warranty | 1 year manufacturer |
More information #ad
2. Mission Automotive
#ad
Extra 1/2" Hole that Fits Most Sockets, Stainless Steel Pinion Yoke Wrench Tool, Works with Various Style Yokes, or Axles, Flanges, Extra Strength Puller for Loosening Pinion Flange and Nuts
#adMission Automotive #ad - You'll be able to utilize your pinion depth setting tool for years. To address this, our stainless steel will prevent any rounding. The problem is, for tight spaces, we added an extra 1/2" square socket. Fits almost all pinion and companion flanges.Holds the yoke in place -- use the pinion wrench while applying torque. Tighten up -- use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. It can also handle other high torque tasks, like crush sleeves.
More information #ad
Compatible with -- our pinion yoke wrench is compatible with most ford, dana, aMC, and GM yokes. The center socket hole is 2". Or for setting the bearing pre-load. Extra strength -- instead of soft carbon steel that strips out easily, we crafted our flange wrench with Stainless Steel. It will help you loosen even the most stubborn pinion nuts. Plus, you might need multiple. There are multiple slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners. Utilize this tool to handle the insane amount of torque needed to get the job done. Additional 1/2" square socket -- other yoke flange wrenches only have one and round out over time. For leverage, grab a 1/2” breaker bar or 3/4” drive tool.
Brand | Mission Automotive #ad |
Manufacturer | Mission Automotive #ad |
Part Number | 5257 |
More information #ad
3. Spicer
#ad
Spicer 44895 Pinion Oil Seal
#adSpicer #ad - Country of Origin: United States. Package Quantity: 1. Package dimensions: 2. 0 cms l x 8. 4 cms w x 13. 0 cms H. Product type: Auto Part.More information #ad
Brand | Spicer #ad |
Manufacturer | Spicer #ad |
Height | 1.3 Inches |
Length | 3.5 Inches |
Weight | 0.02 Pounds |
Width | 3.5 Inches |
Part Number | 44895 |
Model | 44895 |
More information #ad
4. USA Standard Gear
#ad
USA Standard Gear ZK GM8.6 Master Overhaul Kit for GM 8.6 Differential
#adUSA Standard Gear #ad - Includes thread locker, marking compound with brush and gasket. Includes carrier bearings and races,. Includes ing gear bolts, pinion nut, crush sleeve.More information #ad
Fit type: Vehicle Specific. Includes complete shim kit. Usa standard master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races.Brand | USA Standard Gear #ad |
Manufacturer | USA Standard Gear #ad |
Height | 3 Inches |
Length | 12 Inches |
Width | 12 Inches |
Part Number | ZK GM8.6 |
Model | ZK GM8.6 |
Warranty | 1 year warranty against Manufacturer defects |
More information #ad
5. National Oil Seals
#ad
National 4278 Differential Pinion Seal
#adNational Oil Seals #ad - Low swell in hydrocarbon fluids. Design type: spring loaded; multi-lip. Temperature range: -40°f to 225°f; -40°C to 107°C. Delivers quality and reliable performance for every type of repair. Low swell in hydrocarbon fluids. Provides good low temperature capability.More information #ad
Brand | National Oil Seals #ad |
Manufacturer | Federal Mogul #ad |
Height | 0.1 Inches |
Length | 4 Inches |
Weight | 0.02 Pounds |
Width | 0.75 Inches |
Part Number | 4278 |
Model | 4278 |
More information #ad
6. GM
#ad
GM Genuine Parts 291-315 Rear Axle Shaft Seal
#adGM #ad - Gm-recommended replacement part for your GM vehicle’s original factory component. Manufactured to gM OE specification for fit, form, and function. Offering the quality, reliability, and durability of GM OE. High quality materials ensure long service life.More information #ad
Brand | GM #ad |
Manufacturer | ACDelco #ad |
Height | 0.7 Inches |
Length | 3.5 Inches |
Weight | 0.1 Pounds |
Width | 3.5 Inches |
Part Number | 291-315 |
Model | 291-315 |
Warranty | 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details. |
More information #ad
7. Edelmann
#ad
Edelmann 8916 Rack and Pinion Seal Kit
#adEdelmann #ad - Includes comprehensive instructions. Required for each specific application. Includes only top quality components that meet or exceed OE specifications. Affordable alternative to replacing the entire steering rack just to eliminate annoying leaks.More information #ad
Edelmann rack and pinion seal Kits include all the necessary components to reseal your leaking rack and pinion, restoring full factory functionality. Each kit features all the necessary O-rings, seals, hardware parts, rack bushings, etc.Brand | Edelmann #ad |
Manufacturer | Edelmann #ad |
Height | 1.83 Inches |
Length | 6.1 Inches |
Width | 5.19 Inches |
Part Number | 8916 |
Model | 8916 |
More information #ad
8. USA Standard Gear
#ad
USA Standard Gear ZK F8.8 Ford 8.8" Diff Master Overhaul Kit
#adUSA Standard Gear #ad - Usa standard master Overhaul kits let you finish your install with confidence. 8". This kit uses Koyo bearings and races. Included are carrier bearings and races, thread locker, pinion bearings and races, pinion nut, complete shim kit, ring gear bolts, pinion seal, crush sleeve, marking compound with brush and gasket.More information #ad
Fits 2009 and down Ford 8.Brand | USA Standard Gear #ad |
Manufacturer | USA Standard Gear #ad |
Height | 3 Inches |
Length | 12 Inches |
Weight | 6 Pounds |
Width | 12 Inches |
Part Number | ZK F8.8 |
Model | ZK F8.8 |
More information #ad
9. TIMKEN
#ad
Timken 3604 Seal
#adTIMKEN #ad - Prevents seal leakage. Resists abrasives, corrosive moisture and other harmful contaminants from entering the machines. Offers superior service life. Excellent sealing ability. World-class manufacturing standards.More information #ad
Brand | TIMKEN #ad |
Manufacturer | Timken #ad |
Height | 1.8 Inches |
Length | 3.4 Inches |
Width | 3.4 Inches |
Part Number | 3604 |
Model | 3604 |
More information #ad