Top 9 OMC Fuel Line Connector – Powersports Gas Tanks

As an Amazon Associate I earn from qualifying purchases.

1. SING F LTD

#ad

SING F LTD 5/16" 8mm Fuel Line Hose with Connector Compatible with Yamaha Mariner Johnson Mercury OMC Boat RV Caravan Marine Tractor Motor Vehicle

#ad
SING F LTD #ad - Installation steps: 1. Take out tubing female plug2. Press the female plug, aligh the male plug of the fuel tank, and insert it3. Press the hand pump to refuel the outboard motor. Greatly compatible with the ethanol blended fuels as well, more reliable and practical.

Frequently used as a hand pump in boats for fuel supply to the out-board engine. The fuel hose is made of rubber material, not easy to break, wear-resistant, which has an excellent seal property, flexible, a good oil and air leakage resistant performance, and can be bent at will, corrosion resistant. The fuel hose comes with snap-on connectors to allow quick attachment and removal of fuel tanks and outboard engine.

There is marked arrow on this fuel hose body showing fluid flow direction, which demonstrates the oil flow direction. It brings fuel from the tank up to the line and prevents fuel from returning back to the tank keeping it in the line. It is compounded to accommodate today's alcohol-enriched gasoline blends. Bulb engineered to maintain flexibility and prevent collapse in hot and cold temperatures.
BrandSING F LTD #ad
ManufacturerSING F LTD #ad

2. Sierra International

#ad

Sierra 18-8092 3/8" Fuel Connector for Johnson/Evinrude OMC/BRP Outboards, 176445, 775641

#ad
Sierra International #ad - Replaces: johnson/evinrude outboard 176445, 775641 and Moeller 33480, 33480-10 Mates with tank connector, Sierra Part Number 18-6063. All sierra parts qualify for and are covered under Sierra's Industry Leading Customer Satisfaction Warranty. 3/8" 9. 5mm fuel Connector. Packaged for Retail Display.
BrandSierra International #ad
ManufacturerSierra #ad
Height1.3 Inches
Length3 Inches
Weight0.06 Pounds
Width1.5 Inches
Part Number18-8092
Model18-8092
WarrantyAll Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located in the Technical Specification Section.

3. Invincible Marine

#ad

Invincible Marine Fuel Line Connector, Johnson Evinrude Male Fitting, 2-Prong

#ad
Invincible Marine #ad - The most trusted name in marine accessories and equipment. Features the Speed Prime technology. This fuel connector has been tested in extreme climates and is alcohol resistant. Made using the highest quality components. Br53207 johnson evinrude male 2-prong 400JEC clip style tank connector, ¼-inch NPT. Comes with a 1-year warranty. Performance and quality tested. This connector fits 5/16-inch or 3/8-inch fuel lines, includes spring loaded double check valves and has stainless steel hose clamps.
BrandInvincible Marine #ad
ManufacturerInvincible Marine #ad
Part NumberBR53207
ModelBR53207

4. attwood

#ad

Attwood 8883-6 Brass Quick-Connect Tank Fitting 1/4-Inch NPT Male Thread for Johnson/Evinrude/OMC

#ad
attwood #ad - Quick-connect ¼-inch male thread makes installation easy. Extremely versatile; designed for leaded, unleaded, and alcohol-blended fuel. Specifically designed for Johnson/Evinrude/OMC Brand engines and tanks. Solid machined brass for dependable performance, peace of mind. Sport type: Boating.
Brandattwood #ad
ManufacturerAttwood #ad
Height3.25 Inches
Length4.25 Inches
Weight0.14 Pounds
Width9.25 Inches
Part Number8883-6
Model8883-6

5. Moeller

#ad

1/4" NPT, Moeller 033400-10 Johnson/Evinrude Male Fuel Tank Connector

#ad
Moeller #ad - Oem certified. Designed for Johnson / Evinrude outboard engines. Threads into fuel withdrawal on tank. Connector features high quality brass and aluminum fittings. Male engine / tank connector.
BrandMoeller #ad
ManufacturerMoeller #ad
Height6.3 Inches
Length4.5 Inches
Weight0.1 Pounds
Width4.3 Inches
Part Number033400-10
Model033400-10
WarrantyManufacturer

6. TIHOOD

#ad

TIHOOD Fuel Line Assembly, 5/16" Hose Line Marine Outboard Boat Motor RVs Fuel Assembly with Primer Bulb Steel Hose Clamps 6FT

#ad
TIHOOD #ad - Compatible with ethanol blended fuels, Engineered low permeation material prevents fuel evaporation, Tractors, Suitable for Boats, RVs, and Caravans. Stainless steel clamps. Premium quality rubber bulb with rubber line hose. Universal fuel line - 5/16" 8mmHose with 6ft long line. Dual check valves allow priming in multiple orientations without restricting fuel flow. Material: rubber. Note: this is rubber product, please do not store this item under direct sunlight or other rough environment.
BrandTIHOOD #ad
ManufacturerTIHOOD #ad
Part NumberFL-516
ModelFL-516

7. RONYOUNG

#ad

5/16" Hose Line Marine Outboard Boat Motor RVs Fuel Assembly with Primer Bulb Steel Hose Clamps 6FT 5/16"-Rubber, RONYOUNG Fuel Line Assembly

#ad
RONYOUNG #ad - Compatible with ethanol blended fuels, Suitable for Boats, Tractors, Engineered low permeation material prevents fuel evaporation, RVs, and Caravans. Universal fuel line - 5/16" 8mmHose with 6ft long line. Material: rubber. Dual check valves allow priming in multiple orientations without restricting fuel flow. Premium quality rubber bulb with rubber line hose. Stainless steel clamps. Note: this is rubber product, please do not store this item under direct sunlight or other rough environment.
BrandRONYOUNG #ad
ManufacturerRONYOUNG #ad
Part NumberFL-BK516

8. steber

#ad

5 feet, Fuel Line 3/8 ID NBR Hose 6AN Push on Hose 5/8 OD for Small Engines

#ad
steber #ad - Working pressure 2mpa. Push on / lock hose designed for conveying gasoline, buses, trucks, diesel, and bio-diesel fuels in cars, E-85, etc. Id: 3/8 inch, od: 5/8 inch, 6 an nbR liner hose fuel injection 5 feet. The fuel lines for fuel injected systems, are oil resistant, cold-resistant and ethanol tolerance. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Burst pressure 6mpa, handles temperature ranges of -40 to +275 degrees F.
Brandsteber #ad
Manufacturersteber #ad
Part NumberBNBRID10-5

9. Johnson/Evinrude/OMC/BRP

#ad

Evinrude Johnson 3/8" 10’ EPA Compliant Fuel Hose & Primer Bulb Assy 5008589

#ad
Johnson/Evinrude/OMC/BRP #ad - 3/8" i. D. Please verify your own fitment. Hose. X 10 feet long. Hose and components are improved for use with alcohol extended fuels.
BrandJohnson/Evinrude/OMC/BRP #ad
ManufacturerJohnson/Evinrude/OMC/BRP #ad
Height13 Inches
Length16 Inches
Weight6.4 Pounds
Width6 Inches
Part Number5008589
Model5008589