As an Amazon Associate I earn from qualifying purchases.
iFJF #ad - Hooks and stays on rail when not in use. Compatible with all reverse and non-reverse gear equipped snowmobiles. Improved crimps for greater hold. Virtually indestructible 7/16" zinc plated wire rope for increased down pressure, and no coating to crack and peel.
GREATUS #ad - Improved crimps for greater hold. Virtually indestructible 7/16" zinc plated wire rope for increased down pressure, and no coating to crack and peel. Works with all reverse and non-reverse gear equipped snowmobiles. Hooks and stays on rail when not in use.
MiKaFex #ad - Buy direct:if you're experiencing snowy weather, your snowmobile may just need our ice scraper. Lifetime warranty:once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems.
Applicable: ice scrapers are available for all snowmobiles equipped with reverse and non-reverse gear and can be installed with a single bolt.
SPI #ad - Manufactured by spi rail mounted Design expands on previous coil concepts to allow for reversing without damage Includes brackets to hold scratchers when not in use.
GREATUS #ad - Fit all reverse and non-reverse gear equipped snowmobiles for one-bolt mounting. Almost indestructible 7/16 inch galvanized steel wire rope quality assurance. Hook and keep on track when not in use.
YuXuan Pavilion #ad - Dura flex snowmobile snow ice scratchers，fits polaris, Ski Doo, Arctic Cat, and Yamaha Snowmobiles. Hooks onto rails until you need them, Then simply unhook them when conditions make then necessary.
Universal design easily mounts to Rails. Unmatched performance and weight. Works with all reverse and non-reverse equipped snowmobiles. Quantity - 1 pair one left side and one Right side.
Hooks and stays on rail when not in use. Knurled mounting surface eliminates spinning and loosening on the slide rail. Hi-roller recommended for track heights 2-1/2" and taller. All three tip designs are interchangeable with both cable lengths. Dura flex ice scratchers Kit. Improves hifax life and engine cooling on hard packed snow.
Nahntaipy #ad - Excellent material - the ice scratcher is made of high-quality steel material, which can withstand large pressure and has strong anti-strike ability. Unique design - the ice scratcher has a unique anti-slip design that prevents it from loosening or falling off during operation.
Easy to install - the ice scratcher has a cable-like design that can be adjusted to different angles as needed and can be hung up when not in use.
Excellent action - since it is difficult for people to break and clear stubborn ice with ordinary ice scrapers, when the vehicle is moving, the ice scratcher can help you break the ice directly where the snow is frozen, which helps you to clear the ice and snow easily.
1. iFJF
#adIce Scratchers Kit Compatible with All Reverse and Non-Reverse Gear Equipped Snowmobiles,Recommend for track heights 2-1/2"
#adMore information #ad
| Brand | iFJF #ad |
| Manufacturer | iFJF #ad |
| Height | 0.59 inches |
| Length | 11.61 Inches |
| Width | 0.59 inches |
| Part Number | ML-126 |
| Model | ML-126 |
More information #ad
2. Duraflex
#adBtl Designs 15-6426 Hi-Roller Ice Scratchers Pair
#adDuraflex #ad - Ultimate engine cooling and slider lube unmatched performance and weight Works with all reverse and non-reverse gear equipped snowmobiles Pre-assembled for one-bolt mounting Virtually indestructible zinc-plated wire Rope for increased down pressure and no coating to crack and peel Improved crimps for greater hold Knurled mounting surface eliminates spinning and loosening on the slide rail.More information #ad
| Brand | Duraflex #ad |
| Manufacturer | Duraflex #ad |
| Height | 0.5 Inches |
| Length | 18 Inches |
| Width | 6.5 Inches |
| Part Number | 1401-HR |
| Model | 1401-HR |
| Warranty | Manufacturer Warranty |
More information #ad
3. Between the Lines Designs
#adBetween the Lines Designs DuraFlex Solo Ice Scratcher for Snowbikes
#adBetween the Lines Designs #ad - Reversible, stores on top of ski using provided clip, Universal fit, One bolt mounting, Replaceable tip.More information #ad
| Brand | Between the Lines Designs #ad |
| Manufacturer | Between the Lines Designs #ad |
| Weight | 1.5 Pounds |
| Part Number | 1403-SOLO |
More information #ad
4. GREATUS
#adIce Scratchers Kit FIT FOR All Reverse and Non-reverse Gear Equipped Snowmobiles Also Replacement for Track Heights 2-1/2" and Taller 2PCS
#adMore information #ad
| Brand | GREATUS #ad |
| Manufacturer | GreatUs #ad |
| Height | 1.8 Inches |
| Length | 12.4 Inches |
| Width | 5.7 Inches |
| Part Number | ISK01 |
More information #ad
5. MiKaFex
#adIce Scratchers Kit Compatible With All Reverse And Non-Reverse Gear Equipped Snowmobiles Also Recommend For Track Heights 2-1/2" And Taller
#adApplicable: ice scrapers are available for all snowmobiles equipped with reverse and non-reverse gear and can be installed with a single bolt.
More information #ad
It meets or exceeds oem standards and is factory tested and ready to assemble. Premium products: this ice scraper, moisture resistant, made of high quality carbide steel material, is wear resistant, long lasting and sturdy for long term use.| Brand | MiKaFex #ad |
| Manufacturer | HangZhan #ad |
| Part Number | 1 |
| Model | 1 |
| Warranty | 2 |
More information #ad
6. SPI
#adSpring Style, , SPI , Rail Mount Ice Scratchers for Ski-Doo Replaces OEM# 860201728
#adMore information #ad
| Brand | SPI #ad |
| Manufacturer | SP1 #ad |
| Height | 2.36 Inches |
| Length | 10.03 Inches |
| Width | 6.29 Inches |
| Part Number | SM-12597 |
More information #ad
7. GREATUS
#adGreatUs Ice Scratchers Kit Replacement for Dura Fit All Reverse and Non-Reverse Gear Equipped Snowmobiles for One-Bolt Mounting
#adMore information #ad
| Brand | GREATUS #ad |
| Manufacturer | GREATUS #ad |
| Part Number | ISK01 |
| Model | ISK01-MN |
More information #ad
8. YuXuan Pavilion
#adYuXuan Pavilion Replace Ice Scratchers Kit ICE SCRATCHERS with Carbide Tips the Works with all reverse and non-reverse gear snowmobiles.
#adUniversal design easily mounts to Rails. Unmatched performance and weight. Works with all reverse and non-reverse equipped snowmobiles. Quantity - 1 pair one left side and one Right side.
More information #ad
Reverse Compatible, Lightweight. Part # 15-6425. Pre-assembled for one-bolt mounting. Virtually indestructible 7/16" zinc plated wire rope for increased down pressure. Improved crimps for greater hold. Hooks and stays on rail when not in use. Knurled mounting surface eliminates spinning and loosening on the slide rail. Hi-roller recommended for track heights 2-1/2" and taller. All three tip designs are interchangeable with both cable lengths. Dura flex ice scratchers Kit. Improves hifax life and engine cooling on hard packed snow.
| Brand | YuXuan Pavilion #ad |
| Manufacturer | YuXuan Pavilion #ad |
| Part Number | 15-6425 |
| Model | Ice Scratchers |
| Warranty | NO |
More information #ad
9. Nahntaipy
#adLeft and Right 2 Pack, Snowmobile Ice Scratcher Kit Fit for Polaris Arctic Cat Ski-doo
#adEasy to install - the ice scratcher has a cable-like design that can be adjusted to different angles as needed and can be hung up when not in use.
More information #ad
You will get - 1x ice scratcher, if you have any problem during installation and use please contact us in time. You just have to make sure the angle is set correctly and the ice scraper will get enough bite. Excellent action - since it is difficult for people to break and clear stubborn ice with ordinary ice scrapers, when the vehicle is moving, the ice scratcher can help you break the ice directly where the snow is frozen, which helps you to clear the ice and snow easily.
| Brand | Nahntaipy #ad |
| Manufacturer | Yookeep #ad |
| Part Number | Snowmobile Ice Scratcher Kit |
More information #ad
