Top 9 CTS Cadillac Accessories – Automotive Cup Holders

As an Amazon Associate I earn from qualifying purchases.

1. Bocianelli

#ad

CTS,SRX, 2 Pcs 2.75 inch Car Interior Accessories Anti Slip Cup Mat for Cadillac Escalade, SXT,etc All Models, ATS,STS, XTS, BLS

#ad
Bocianelli #ad - Made of Silicone, easy to clean. For all for cadillac escalade, xtS, SXT Decoration, SRX, ats, cts, bls, sts, etc.2. Water-proof and dust-proof, Keep your cup groove clean and tidy. 5. Matches all auto interior accessories, upgrade the grade and beauty of your auto. 1. 4. Stop the bottom of cup holders getting messy / scratching over time. 3. Size:diameter 2. 75 inch, thick 02inch. Please make sure it fits your car, thanks.
BrandBocianelli #ad
ManufacturerBocianelli #ad
Part NumberBocianelli

2. Sunkissed

#ad

4 Pack Car Door Lights for Cadillac Logo Lights Car Door Lighting Entry Ghost Shadow Projector Laser Emblem Welcome Lamp for ATS SRX XTS Cadillac Accessories Replacement

#ad
Sunkissed #ad - Super cool led logo projection on the floor for Cadillac. Note: if the film is fading, as this will cause the chip to be in a burning state all the time, It is recommended that the door of your car not be opened for too long, thus fading.

Instruction: to extend the Logo light's life-span, it is best within 2 minutes. If the film was damaged, after opening the door, please close it asap, please take it out and the lamp can be used for normal illuminating. Warranty policy:12-month replacement warranty. Not fit for all cts & dts !!!fit for: cadillac srx 2010-2017 xts 2009-2018 ats 2014-2017 4 x door lights.

Please check compatible models list in description page before placing order. Please kindly make sure your car has original car door lights. When you open the car door will automatically turn on the high-definition projection and automatically turn off. Easy to install–direct replacement. No modifications required. No wire cutting. Aluminum back cover, Better heat dissipation, Long life-span.
BrandSunkissed #ad
ManufacturerSUN-CAT #ad
Height1.46 Inches
Length5.51 Inches
Width3.74 Inches
Part NumberSUN-CAT004

3. Wonderchef

#ad

SXT, For Cadillac Wireless Car Door Led Welcome Laser Projector,No Drill Type Logo Light for All Cadillac,Escalade, CTS,SRX, XTS, BLS, ATS,STS, etc.

#ad
Wonderchef #ad - 100% brand new door laser wireless sensor light Lamps, Free replacement for the logo film slide, Powered by 3 Pcs AA batteriesPackage Not Included.

It can be installed in both left & right door. The dazzle logo light and the signal light will display on the ground when you open the car door and it will be turn off when you close the door. Just stick the light lamp on the door panel and stick the magnet on the bottom of the car frame. Courtesy door light make your car artistic moreover the atmosphere. No need drill hole. This product is wireless especially designed for auto modification fancier and it will not destroy the original car appearance bring more driving fun to drivers. Easy installation. No harm to car.
BrandWonderchef #ad
ManufacturerWonderchef #ad
Part Numberjiayuandzkl3
Model8542098409

4. Deselen

#ad

EBS-BT12, Deselen, Stainless Steel License Plate Frame with Screw Caps Cover Set for Cadillac, Silvery White/Chrome 2 Pieces

#ad
Deselen #ad - Elegant designs add a personalized feature to your car. Canadian license plate design: frame size: 12-1/4" x 6-3/8", but deselen custom designed with Precision cut using high-tech computer guided lasers Cadillac logo OEM logo with chrome-like lettering, this kind of decorative license plate can add personalization to your vehicle! Manufactured from highly durable stainless steel: made from the finest grade 304 stainless steel, rust or pit.

All mounting hardware included: all necessary mounts, holder and Screw are included, but also conceal the hardware, all the license plate carrier come with theft-deterrent caps that not only help to keep the frame protected, bracket, giving your license plate that sleek look you¡¯ve been striving for. Deselen license Plate Frames are durable, long life and a clean appearance.

Superior in both quality and design, and guaranteed to never tarnish, this license frame is manufactured utilizing only the finest materials and workmanship. Customized standard u. S. 2 pack, fit for both front and back license plate. Easy and hassle-free installation: fits standard license plates, come with instruction, the license plate set can be extremely easily and quickly mounted with no vehicle modifications required. A set of two, for both rear and front license plates.
BrandDeselen #ad
ManufacturerLIGHTUP LED #ad
Height0.15 Inches
Length12.25 Inches
Weight0.8 Pounds
Width6.5 Inches
Part NumberEBS-BT12

5. Wonderchef

#ad

Metal Labeling for Escalade ATS SRX XTS CTS XT5 XLR,etc, Car Tailgate Hood Emblem, 2pcs 3D for Cadillac Emblem

#ad
Wonderchef #ad - Make your car stand out and be instantly recognizable! High qualityelegant designs add a personalized feature to your car, Fade proof for 3 to 5 years. High quality painted finish with bright clear gloss resin.

Simple installthey can be replaced at any time and are removable. Applicablecadillac emblem cadge stickers can be attached to the front, bonnet, rear end, doors, fuel tank cover, trunk, engine hood, bumpers and any other position on your car that takes your fancy. Satisfaction guaranteeprovide 100% satisfaction guarantee: 30 days hassle free money back, an 12-month warranty. You can get it immediately!3d for cadillac emblemfor cadillac dts, srx, xts, v8, xc5, sts, ct6, ats, cTS. Size: 2. 36*2. 36inch6 * 6 CM. They offer a cost effective way to cover up scratches on your paintwork.
BrandWonderchef #ad
ManufacturerWonderchef #ad
Part Numberjiayuandzkdlkh

6. Fujun

#ad

CTS, XTS, fit for Escalade, STS, ATS, BLS, SRX, etc All Models, Fujun Upgraded 2 Pcs 2.75 inch Car Interior Accessories Anti Slip Cup Mat for Cadillac, SXT

#ad
Fujun #ad - Protect your cup slotPrevent the bottom of cup holders getting messy scratching over time. The product is thicker and more durable.

Fit for cadillacfor all cadillac models, sts, cts, bls, xts, ats, sRX, etc. Water-proof & dust-proofkeep your cup groove clean and tidy. Also you will enjoy a 30-day barrier-free refund and a 12-month warranty. Excellent customer serviceas our most valued customer, you will receive a small gift when you receive the package. Made of washable Silicone, easy to clean. Upgrade designupgraded design and three-dimensional icon make the product more beautiful. Diameter 2. 75 inch, sxt, fit for Escalade, thick 0.2inch.
BrandFujun #ad
ManufacturerFujun #ad
Part NumberBD11

7. Greenf

#ad

Car Door Led Logo Projector Light for the Replacement of Cadillac Escalade Deville ESV SRX CTS DTS ATS CT4 CT5 CT6 XT5 XT4 XT6 XTSCar Accessories Wireless Welcome Shadow Lights

#ad
Greenf #ad - Universal fits: the led car door lights compatible with most cadillac cars, please make sure the door panels is straight and flat near the bottom likes the pictures. If you are still unsure, Before purchasing, Just contact us. We will give you a satisfactory answer.

Worth to upgradethe use of intelligent magnet induction device, open the door automatically on, not only can improve your car grade, but also can be used as a car warning light to prevent accidents. Practical&cool: due to the durable materials, the logo lamp can used almost 80000-100000hrs. When you open the door, a Super Bright Cadillac logo will be projected to the road, especially cool and eye-catching. Of course it will also act as a warning to the rear car to avoid your car.

100% quality guarantee: we will provide 12 months of after-sales service to fully protect your good shopping experience. Easy to installno drilling, no wiring. Easy to install and No damage to your car at all. Powered by 3pcs AAA batteriespackage not included. If you need it, please feel free to contact us all the time. Just stick the cadillac ghost shadow light lamp on the door panel and stick the magnet on the car threshold.
BrandGreenf #ad
ManufacturerGreenf #ad
Part NumberGreenf

8. ROADFAR

#ad

ROADFAR 315MHz Programmed Tire Pressure Monitoring System Sensor TPMS 13598771 13598772 13586335 Sets of 4

#ad
ROADFAR #ad - Notes: this tire pressure sensor does not require programming. Original: for gm-recommended replacement part for your GM vehicle’s original factory component. The specific operation is as follows Step 1: Select “Check Sensor” in ATEQ VT46.

Features: tire pressure sensor enhances vehicle safety with durability and reliability. Oem: 13598771, 12768826, 20923680, 15123145, 13589597, 15254101, 13598772, 25920615, 22854866, 25799331, 25952370, 13586335, 13581558, 23445327, 20922900, 15920615, 13598255, 22853741, 15921013, 15922396. Fitment: for most for gm vehicles. Step 5: select tire location then push button to trigger.

Step 6: wake up sensor successfully and display sensor information on screen. Safty: taking into account the quality of the product and personal safety, this tire pressure sensor will take 10 out of every 100 to conduct on-site inspection to ensure that customers can use it with confidence. Step 2-4: select vehicle brand and mode year.
BrandROADFAR #ad
ManufacturerROADFAR #ad
Height1.18 Inches
Length3.27 Inches
Weight0.26 Pounds
Width2.95 Inches
Part Number818586-5231-1102337784
Model818586-5231-1102337784

9. IJUSTBY

#ad

IJUSTBY 4 Pcs Metal Car Wheel Tire Valve Stem Caps for Cadillac XT4 XT5 CT6 SRX XTS ATS CTS CTS EXT Coupe Hybrid Escalade Logo Styling Decoration Accessories.

#ad
IJUSTBY #ad - 100% satisfaction guarantee:every product we sell goes through a rigorous test before we sell it to ensure quality. If you are not satisfied with our product for any reason, just contact us.

Each product is backed with a one-year and 100% satisfaction. 5. 2. Technology: plate the surface to avoid metal oxidization, rusting and to improve corrosion resistance, wear resistance, texture and glossiness.3. Easy installation:with the rubber Seals inside,the cap can replace the original bad valve cap of the tyre and also show the beauty characteristic of the tyre. 1. Material: the valve cap is made of Zinc Alloy, which is corrosion resistant, durable. Quantity: 4pcs/package. Second:preventing the flat tire and ensure stable tire pressure. Third: Ensure safe driving. 4. Functions: first:protecting the valve core, corrosion due to direct contact with clay, water and snow.
BrandIJUSTBY #ad
ManufacturerIJUSTBY #ad
Part NumberCXA12