Top 9 2×4 Stake Pocket – Tow Straps

As an Amazon Associate I earn from qualifying purchases.

1. Hydraker

#ad

Hydraker 4Pcs Trailer Stake Pocket 2" X 4" Fit for Flat Beds and Trucks

#ad
Hydraker #ad - You can use it safely. Easy to install:only need to drill two holes, has a loose fit so no modification is needed. Package included:4 pcs trailer stake pocket. Note:Screws not included. Materials: premium grade, rust-resistant zinc coated commercial. Trailer stake pocket fit for flat beds and trucks. Can be used with 2x4 lumber trimmed to 3" or with steel stake posts. Has rounded corners will not cut you. Square holes works with ⅜” carriage bolts, and regular ⅜ bolts with 5” mounting hole spacing.
BrandHydraker #ad
ManufacturerHydraker #ad
Part NumberS128

2. Dog River Tools

#ad

2X4, Dog River Tools Utility Trailer Stake Pocket with Bottom for Flat Beds and Trucks, Bolt on, Zinc Coated 4 Pack

#ad
Dog River Tools #ad - Square holes works with ⅜” carriage bolts, and regular ⅜ bolts with 5” mounting hole spacing. Easy to install you only need to drill two holes, has a loose fit so no modification is needed. Fits 2x4 without modification, slides right into opening, with bottom support. Bolt on stake pocket for trailers and trucks, Zinc coated, Heavy duty 14 gauge steel. Has rounded corners unlike others with sharp rigid corners that can cut you.
BrandDog River Tools #ad
ManufacturerDog River Tools #ad
Part NumberStake Pocket

3. LIBRA

#ad

LIBRA 12 Heavy Duty Weld on 2x4 Steel Stake Pockets for Trailer Truck 4 Ga -27022

#ad
LIBRA #ad - Fit standard 2x4, Weld-on application. 3" tall, 1-5/8" inside deep x 3. 5" inside width. Proudly made in USA. Made by 4 gauge steel, for heavy duty application, stronger than 6 or 7 ga in the market. Package include 12 stake pockets.
BrandLIBRA #ad
ManufacturerLibra #ad
Weight15 Pounds
Part Number27022
Model27022

4. CURT

#ad

CURT 83072 1-5/8-Inch x 3-1/2-Inch Raw Steel Weld-On Trailer Stake Pocket Tie Down Anchor

#ad
CURT #ad - Ready to weld. This stake pocket is made from steel for dependable strength, and it is designed for a weld-on installation. Heavy-duty. This stake pocket tie down is constructed from solid steel for heavy-duty strength.

It is also perfectly sized to accept a 2x4 stud. This trailer stake pocket tie down comes with a raw steel finish to be ready for welding right out of the package. Versatile. This weld-on stake pocket anchor is great for securing cargo loads on heavy-duty flatbed trailers and flatbed trucks. High-strength. The 3-1/2-inch x 1-5/8-inch opening can be used to fasten down ropes, ratchet straps or binder chains. Once installed, cables, this trailer stake pocket is fast and convenient to use. Easy to use.
BrandCURT #ad
ManufacturerCurt Manufacturing #ad
Height2 Inches
Length7 Inches
Weight1 Pounds
Width3 Inches
Part Number83072
Model83072
WarrantyLimited Lifetime Warranty (One-Year Finish, One-Year Parts)

5. Pack'em

#ad

Pack'em Bolt-on Stake Pocket for Trailers & Trucks Racks 10

#ad
Pack'em #ad - 10 gauge steel - solid 1/8" thick. Supports for side Walls on Trucks & Trailers. Slightly Tapered for a tight fit. See measurements below.
BrandPack'em #ad
ManufacturerRack'em Mfg #ad
Part NumberPK-BSP
ModelPK-BSP

6. LIBRA

#ad

8 Heavy Duty Weld on 2x4 Steel Stake Pockets for Trailer Truck 4 Ga -27022

#ad
LIBRA #ad - Fit standard 2x4, Weld-on application. Package include 8 stake pockets. 3" tall, 1-5/8" inside deep x 3. 5" inside width. Proudly made in USA. Made by 4 gauge steel, for heavy duty application, stronger than 6 or 7 ga in the market.
BrandLIBRA #ad
ManufacturerLibra #ad
Height5 Inches
Length5 Inches
Weight10 Pounds
Width5 Inches
Part Number27022
Model27022

7. LIBRA

#ad

LIBRA 20 Heavy Duty Weld on 2x4 Steel Stake Pockets for Trailer Truck 4 Ga -27022

#ad
LIBRA #ad - Made by 4 gauge steel, for heavy duty application, stronger than 6 or 7 ga in the market. 3" tall, 1-5/8" inside deep x 3. 5" inside width. Proudly made in USA. Fit standard 2x4, Weld-on application. Package include 20 stake pockets.
BrandLIBRA #ad
ManufacturerLibra #ad
Weight25 Pounds
Part Number27022
Model27022

8. Mytee Products

#ad

Mytee Products 4 Pack Trailer Stake Pocket Winch Flatbed Utility Capacity# 16200 lbs

#ad
Mytee Products #ad - Gives you a winch anywhere there is a Stake Pocket. Fits common flush and outside Stake Pockets. Has 4 cotter pin holes for precise pin placement to ensure a perfect fit in your stake pocket. Mytee stake Pocket Winch 4 Pack. Working load limit: 5400 lbs, capacity: 16, 200 lbs, Black Powder Coated.
BrandMytee Products #ad
ManufacturerMytee Products #ad
Weight41.8 Pounds
Part NumberSP-WINCHx4-AMZ

9. The ROP Shop

#ad

The ROP Shop | Pack of 12 2x4 Raw Steel Weld-On Stake Pocket Brackets for Curt 83072 Trailers

#ad
The ROP Shop #ad - Includes - 12 2x4 steel weld-on Stake Pocket Bracket; comes as shown in the first image. Used in many applications such as trailers, haulers & vehicles.

Perfect for adding walls and tiedown points to trailers, trucks and flatbeds. Specs - material type: 7 gauge steel 3/16" thick with raw finish ideal for welding. The 3 1/2" x 1 5/8" opening can be used to tiedown ropes, cables, cargo straps or transport binder chains in addition to fitting a 2x4 stud. Refer to images 2 & 3 for more information. U-shape form is perfect for standard size 2x4 board. The rop shop replacement pack of 12 2x4 raw Steel Weld-On Stake Pocket Brackets for Curt 83072 Trailers.
BrandThe ROP Shop #ad
ManufacturerThe ROP Shop #ad
Part Number1001670012_2