Top 8 U Joint Grease Fitting – Grease Guns

As an Amazon Associate I earn from qualifying purchases.

1. Neiko

#ad

Bearing Housings, Mechanical Component Lubrication, NEIKO 50463A Grease Fitting Assortment | 110 Piece | SAE | Straight and Angled Zerk Kit | A3 Steel | For Angled Grease Guns

#ad
Neiko #ad - Hydraulic greasing: these grease zerks feed lubricant into a bearing instead of having to disassemble parts to apply the lubricant, which makes for effective work efficiency when using a grease gun.

Compatibility: this assortment kit is perfect for use on cars or vehicles and solves OEM incompatibility issues with straight, 90-degree and 45-degree angled fittings to allow a pressure-resistant connection. Application: grease fittings, sometimes known as Zerks or grease nipples, are small hydraulic check valves used on bearings and similar mechanical assemblies to supply lubricant to internal working parts.

Convenient: the plastic storage case contains each SAE grease zerk fitting in the kit in different compartments with an organization chart to neatly stay organized in your tool collection. Includes: sizes - 30 straight 1/4-28, 20 straight 1/8" pipe grease, 15 45-degree, 1/4-28 and 15 90-degree 1/4-28 for angled grease guns and more.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height1.18 Inches
Length8.27 Inches
Width4.45 Inches
Part Number50463A
Model50463A

2. LockNLube

#ad

LockNLube Narrow Needle Dispenser

#ad
LockNLube #ad - Delivers a fine line of grease for shafts and other applications. Works best with the LockNLube Grease Coupler. Extra reach for hard to reach grease fittings. For hand-operated grease guns. Snaps directly onto a jaw type coupler to reach grease fittings in very tight spaces.
BrandLockNLube #ad
ManufacturerLockNLube #ad
Height0.75 Inches
Length5.5 Inches
Weight0.09 Pounds
Width3 Inches
Part NumberLNL122

3. Lincoln

#ad

Model Number 989, 1/4in. Inlet, Lincoln 50:1 Air Grease Pump, 7500 PSI

#ad
Lincoln #ad - Lube bucket not included. Includes steel cover with 3 thumb screws for securing to 25-50 lb. Carrying handle. Seat with nitrided steel plunger and bushing help assure long service life. Follower plate assures positive prime at low temps. Micro-lapped, hardened steel air valve.
BrandLincoln #ad
ManufacturerLincoln #ad
Height6.6 Inches
Length13 Inches
Weight26.8 Pounds
Width27.8 Inches
Part Number989
Model989
Warranty12 months parts / 12 months labor

4. boeray

#ad

1/4"-28 1/8"-28 Straight and 90 Degree and 45 Degree Steel Zerk Grease Nipple Fitting, Boeray Hydraulic Grease Fitting SAE Standard 120pcs Assortment Kits

#ad
boeray #ad - Quantity:120pcs. Sizes: includes commonly used zerk/grease sae fittings 30pcs 1/4"-28 straight 180-degrees, 20pcs 1/8"-28 straight 180-degrees, 25pcs 1/4"-28 90-degrees, 15pcs 1/8"-28 45-degrees, 15pcs 1/4"-28 45-degrees, 15pcs 1/8"-28 90-degrees. Used for: automotive use and solves OEM incompatibility issues with straight, 90-degree and 45-degree angled fittings. Easy storage: 6. 8” x 3. 8” x 09”inch plastic carrying case for easy transport, safe storage, and quick organization; Sizing chart is included for simple identification. Material:Steel.
Brandboeray #ad
Manufacturerboeray #ad
Part Number120 pcs Steel Imperial Units Kit

5. PROLUBE

#ad

ProLube 44920 Professional Narrow Needle Nose Adaptor

#ad
PROLUBE #ad - No threads, no screwing or unscrewing, U-joints, just snap on and use on sealed bearings, high-pressure insert fittings and recessed fittings. Greasing in inaccessible, difficult to reach areas becomes very convenient with the use of any of the Quick Link accessories. Ready to use range is detailed in the following pages. Various other combinations, however can be devised based on specific application and need. A simple and effective system that renders versatility to Grease Guns. The system is suitable for use with hand operated grease guns only. Connect or disconnect with a snap.
BrandPROLUBE #ad
ManufacturerGroz #ad
Height1.25 Inches
Length2.56 Inches
Width9 Inches
Part Number44920
Model44920

6. MyParts

#ad

MyParts Rear Driveshaft Assembly Compatible with 89-99 Chevrolet GMC K1500

#ad
MyParts #ad - Vehicle fitment notes: position = rear bed length = 78. 0 wheel base = 141. 5 addl note = wo/Heavy Duty Chassis. Interchange part Numbers: 15018623. Fit type: Vehicle Specific. Part number: pa-4920838.
BrandMyParts #ad
ManufacturerMyParts #ad
Part NumberPA-4920838

7. Supreme Suspensions

#ad

Supreme Suspensions, Upper Control Arms for 2007-2021 Toyota Tundra 2WD/4WD Heavy-Duty U.C.A with FK 1.25" PTFE-Lined Uni-Ball Bearings & Black Poly Bushings for 1" to 4" Lifted Applications

#ad
Supreme Suspensions #ad - Benefits: designed to increase usable wheel travel and correct camber and caster angle improving steering stability while reducing darting or wandering on 1-4" lifted trucks.

Installation takes 2-3 hours without the need for special tools. Contents: 2x astm 4130 chromoly steel uni-ball Upper Control Arms, Installation Hardware, and Supreme Suspensions Pro Pack. Compatible with 2007 - 2021 Toyota Tundra 2WD 4WD. Superior strength: quality welded astm 4130 chromoly alloy steel tube cold drawn in sand springs oklahoma - cad/cam Engineered Laser Cut & CNC Bent Tubes for Maximum Strength - 90° Angled Zerk Fitting to Grease the Polyurethane Bushings - Pre-Installed FK 1. 25" ptfe-lined Uni-Ball Bearings. Technical notes: designed to accomodate up to 4" of lift.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Weight26 Pounds
Part NumberAZM CA0102(blk)(pro)

8. Carli Suspension

#ad

Carli Suspension 17+ Superduty F250/F350 4×4 Adjustable Track Bar

#ad
Carli Suspension #ad - Cnc machined tapered spindle adapters convert the factory ball joint to a 1" uniball for added component strength & maximum wheel travel. Control arm pivots include zerk fittings to grease the urethane bushings & inner sleeves without disassembly. Complete grade 8 hardware kit is included. 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U. S. A. Heim upper control arms are fully adjustable to allow maximum tuning of caster and camber.
BrandCarli Suspension #ad
ManufacturerCarli Suspension #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberCS-FATB-17
ModelCS-FATB-17