Top 8 TRANSMISSION JACK ADAPTER – Transmission Jacks

As an Amazon Associate I earn from qualifying purchases.

1. Performance Tool

#ad

Performance Tool W41044 Transmission Adapter Tool

#ad
Performance Tool #ad - Converts floor jacks into transmission jacks. Meets or exceeds asme pald-2009, Always secure transmission in place with safety chain Included. Transmission adapter for the removal and installation of passenger car and light duty truck transmissions. Fits all jacks with 1 5/32" removable saddle shaft. Ideal for vw beetle engine removal with rear engine placement. Adapter head tilts 30° forward and 30° backward & includes safety chain.
BrandPerformance Tool #ad
ManufacturerWilmar #ad
Height27.7 Inches
Length7.1 Inches
Weight22.4 Pounds
Width6.5 Inches
Part NumberW41044
ModelW41044

2. ATE Pro. USA

#ad

5.12" Width, 1/2 Ton, 9.84" Length, 17.72" Height, ATE Pro. USA 84153 Transmission Jack Adaptor

#ad
ATE Pro. USA #ad - This is manufactured in china. Ratcheting action to speed thru the toughest job. Multipurpose design for lifting, pulling and spreading.
BrandATE Pro. USA #ad
ManufacturerATE Pro Tools #ad
Part Number84153
Model84153

3. 911 motorsports

#ad

For axles, Floor & Transmission Jacks, Bumper, Transmission, Transfer case, Fuel Tank, 911 motorsports 4 Point Jack Adapter

#ad
911 motorsports #ad - Capacity at maximum extension. 800 lbs. Pick the base plate to match your jack. Floor base is now machined to work with newer bolt on floor jacks. Made in usa. Read the description below for more information. Offers the versatility to hold just about anything that is large, heavy and awkward with your transmission or floor jack. Main bars adjust from 16-28” wide. Threaded bars adjust from 6-20” wide.
Brand911 motorsports #ad
Manufacturer911 motorsports #ad
Part NumberJA240TF

4. 9TRADING

#ad

9TRADING 1100 lbs Auto Transmission Jack Adapter Capacity Transform Automotive Floor Jack

#ad
9TRADING #ad - Saddle tilt: 60 Degree forward, 10 degree backward. The adapter provides 60-degree-forward and 10-degree-reverse tilt, and its “feet” slide to accommodate your transmission sides.

Turn any standard floor jack into a transmission jack! Removable saddle and 1-1/4'' hole into a transmission cradle for cars and trucks. Rugged alloy steel construction. Safety chain included. It comes with a single safety chain that you tighten with a screw hook. Fits all standard hydraulic floor jacks. Max length : 13", min length: 9", 1100lbs capacity. Brand new universal transmission jack adapter Suits most automotive transmissions, standard floor jacks and differential gears Also fits rear axle units with saddle shafts.
Brand9TRADING #ad
Manufacturer9TRADING #ad

5. Dr.Roc

#ad

Dr.Roc Scissor Jack Adapter for 1/2 Inch Drive Impact Wrench or 13/16 Inch Lug Wrench or Power Drills, Scissor Jack Drill Adapter for Impact Drills Socket Automotive Jack RV Trailer Leveling Jack

#ad
Dr.Roc #ad - Easy to use with the following tools: ▶1/2" drive/impact drills/ratchet or standard drive sockets; ▶13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill; ▶ If you don't have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks.

No more worrying during use. Dr. Roc-most trusted auto accessories expert, millions buyers' choice, excellent customer service. Sturdy: power saving scissor jack Adapter-Made of very solid chrome vanadium steel and new composite steel material.

Compatibility: after we adopted standardized production, scissor jack adapter is suitable for most of loop type or double eyelet type scissor jacks in the market. If you are worry about compatibility, please check the oval's size on your jacks. Product dimensions: 507*41. 4*24 mm 2. 0 x 1. 63 x 095 inches; Slot Size: 8.
BrandDr.Roc #ad
ManufacturerDr.Roc #ad
Height1.63 Inches
Length2.1 Inches
Weight0.3 Pounds
Width1 Inches
Part NumberDR-25097
ModelDR-25097

6. Sunex Tools

#ad

Sunex Tools 7706 Fuel Tank Adapter

#ad
Sunex Tools #ad - Foam support pads can adjust for height, width and length to fit any 40 gallon gas tank configuration. Designed for use on all under hoist transmission jacks for the removal, installation and moving of emptied automotive gas tanks. Two 8-foot tie-down straps secure the tank to the adapter. Ground wire assembly prevents static electric discharge on older metal tanks. Quick and easy installation to all ratcheting finger transmission jack saddle and comes with a universal adapter plate for all other saddles.
BrandSunex Tools #ad
ManufacturerSunex Tools #ad
Height23.4 Inches
Length15.6 Inches
Weight49.9 Pounds
Width3.5 Inches
Part Number7706
Model7706
Warranty12 months parts / 12 months labor

7. OTC

#ad

OTC Tools 223196 Transmission Jack Mounting Adapter Kit

#ad
OTC #ad - Features four adjustable arms that help stabilize transmissions that have rounded bottom surfaces. Ideal for use on larger standard transmissions with irregularly shaped oil pans. Used with the otc 1728 air-assisted 1000 pound Capacity High-Lift Transmission Jack.
BrandOTC #ad
ManufacturerOTC Tools #ad
Height6.1 Inches
Length15.2 Inches
Weight0 Pounds
Width6.25 Inches
Part Number223196
Model223196

8. I_S IMPORT

#ad

TRANSMISSION TRANS JACK ADAPTER FOR HYDRAULIC FLOOR JACK ADAPTOR LIFT KIT

#ad
I_S IMPORT #ad - Fits all standard hydraulic floor jacks. Turn any standard floor jack into a transmission jack! Removeable saddle and 1-1/4'' hole into a transmission cradle for cars and trucks. It comes with a single safety chain that you tighten with a screw hook. Transmission trans jack adapter for hydraulic floor jack adaptor lift kit. Safety chain included. Rugged alloy steel construction.
BrandI_S IMPORT #ad
ManufacturerI_S Import #ad
Part Number5823933120
Model5823933120