As an Amazon Associate I earn from qualifying purchases.
If you have any other questions, and we can usually get back to you within 1 business day.
These are not cheap Chinese parts, this is a quality kit that will last. Because of limits, sometimes not all the parts are pictured, feel free to send us a message, but we always try to supply pics of the main pieces. Thanks! the pictures are accurate and show you the actual parts that you will be buying.




If you find any stud missing, please send us mail by our store home page for help ! Made of iron with good ductility with black oxide finish, high temperature resistance. Centerless ground and heat treated before thread rolling, are designed to maximize reliability and strength, with nominally rated 220K psi tensile strength.


You sacrifice some low end torque in the pursuit of more power higher in the RPM range, Sierra, Tahoe, Suburban, Yukon, but gain an idle note that is distinctly BTR! Stage 3 grind, just not ideal for the everyday hauler.
An aftermarket converter is highly recommended with this grind. Excellent for 4. 8 5. 3 6. 0 6. 2 silverado, it is still a tow-friendly camshaft, Escalade. Stage 3 specifics: the stage 3 v2 camshaft is an amazing all around grind for the truck enthusiast. Brian tooley racing btr stage 3 truck cam, beehive Springs and 7. 400" chromoly Pushrods 4. 8 5.
1. Enginetech
#ad
Engine Rebuild Overhaul Kit FITS: 2007-2009 Chevrolet GMC 5.3L 5.3 5300 V8 LS Vortec W/Flat-Top Pistons
#adEnginetech #ad - Sizes available: pistons & rings:std, 030, 040 - rod/main Bearings:STD, 020, 010, 020, 030. This rebuild kit will include: full gasket set w/ mls head gaskets, floating pin flat-Top Pistons w/ Coated Skirts, Premium Piston Rings, Oil Pump, Freeze Plugs, Main/Rod Bearings, 3pc Timing Set, Camshaft Bearings, Valve Stem Seals.If you have any other questions, and we can usually get back to you within 1 business day.
More information #ad
Thanks! After you order you need to send us a message letting us know what size of parts you want. This rebuild kit kit has all the parts you need to freshen up that worn engine. These parts are manufactured directly from only high quality companies with ISO, QS & TS quality systems in place. These are not cheap Chinese parts, this is a quality kit that will last. Because of limits, sometimes not all the parts are pictured, feel free to send us a message, but we always try to supply pics of the main pieces. Thanks! the pictures are accurate and show you the actual parts that you will be buying.
Brand | Enginetech #ad |
Manufacturer | Enginetech #ad |
Height | 50 Centimeters |
Length | 100 Centimeters |
Weight | 1 Pounds |
Width | 100 Centimeters |
Part Number | R-RCC325GP |
Warranty | 1 YEAR MANUFACTURER WARRANTY |
More information #ad
2. KING
#ad
5.3L, King Rod and Main Bearing set for LS engines including 4.8L, 6.0L V8
#adKING #ad - Standard Size Bearings will be sent. Send a message to check current stock of King. If you require oversizes, send a message immediately. If king is out of stock, we will substitute Clevite A Series or ACL Brand A Series.More information #ad
Brand | KING #ad |
Manufacturer | Northern Auto Parts #ad |
Weight | 1 Pounds |
Part Number | LS1RM |
More information #ad
3. Clevite 77
#ad
Clevite CB-663P8 Engine Connecting Rod Bearing Set
#adClevite 77 #ad - Durability and dependability. Country of Origin : United States. It is a suitable upgrade from Bi-Metal engine bearings. Package dimensions: 4. 3 l x 16. 7 h x 8. 9 w.More information #ad
Brand | Clevite 77 #ad |
Manufacturer | Clevite Engine Parts #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.83 Pounds |
Width | 0 Inches |
Part Number | CB-663P(8) |
Model | CB-663P(8) |
More information #ad
4. Michigan Motorsports
#ad
Michigan Motorsports 7.400 Pushrods Fits 4.8 5.3 5.7 6.0 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
#adMichigan Motorsports #ad - These are the stock length 7. 400" long 5/16" pushrods. Ls 7. 400" pushrods. Set of sixteen 16 stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines.More information #ad
Fits 4. 8 5. 3 5. 7 6. 0 ls1 ls2 ls3 ls6 l99 ls4 ls9 lsa lq4 lq9 l76 l92. Pushrod specifications are as follows: overall length: 7. 400" tube size: 5/16" x. 075" stock material: 1010 ends: 5/16" ball drilled.Brand | Michigan Motorsports #ad |
Manufacturer | Michigan Motorsports #ad |
Height | 50 Centimeters |
Length | 100 Centimeters |
Width | 100 Centimeters |
Part Number | A2500 |
More information #ad
5. PQY
#ad
PQY 12-Point Cylinder Head Stud Kit Compatible with Chevrolet LS LQ9/LS1/LS6 4.8L 5.3L 5.7L 6.0L Engine
#adPQY #ad - Compatible with 98-02 camaro/firebird f-body. Package include20* m11 head studs; 10* m8 studs; 30* parallel-ground Washers; 30* 12-point Nuts.If you find any stud missing, please send us mail by our store home page for help ! Made of iron with good ductility with black oxide finish, high temperature resistance. Centerless ground and heat treated before thread rolling, are designed to maximize reliability and strength, with nominally rated 220K psi tensile strength.
More information #ad
For 97-03 c5 corvette. Easy to install, direct replace the old rusted bolts, improve car performance. For 99-03 silverado/Sierra GM Trucks 4. 8l, 5. 3l, 6. 0l.Brand | PQY #ad |
Manufacturer | PQY #ad |
Part Number | emk05 |
More information #ad
6. Sealed Power
#ad
Sealed Power Premium Piston Ring Set E-921K
#adSealed Power #ad - Decreases friction. Country of origin : United States. Exacting tolerances. Very resistant to scuffing.More information #ad
Brand | Sealed Power #ad |
Manufacturer | Sealed Power #ad |
Height | 24 Inches |
Length | 132 Inches |
Weight | 0.5 Pounds |
Width | 72 Inches |
Part Number | E921K |
Model | E-921K |
Warranty | Please contact retailer/seller for assistance. |
More information #ad
7. Michigan Motorsports
#ad
Brian Tooley Racing BTR Truck Stage 3 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2
#adMichigan Motorsports #ad - Stage iii camshaft specs specs: 218/224. 553/. 553 110+0 requires a 3 bolt timing gear. Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance.You sacrifice some low end torque in the pursuit of more power higher in the RPM range, Sierra, Tahoe, Suburban, Yukon, but gain an idle note that is distinctly BTR! Stage 3 grind, just not ideal for the everyday hauler.
More information #ad
The brian tooley vortec racing truck cam kit includes: stage 3 Truck Cam, Set of VS LS Hat Seals, Beehive Springs, 7.400 chromoly Pushrods. An aftermarket converter is highly recommended with this grind. Excellent for 4. 8 5. 3 6. 0 6. 2 silverado, it is still a tow-friendly camshaft, Escalade. Stage 3 specifics: the stage 3 v2 camshaft is an amazing all around grind for the truck enthusiast. Brian tooley racing btr stage 3 truck cam, beehive Springs and 7. 400" chromoly Pushrods 4. 8 5.
Brand | Michigan Motorsports #ad |
Manufacturer | Michigan Motorsports #ad |
Part Number | A7500+A6400+A6500+72400 |
More information #ad