Top 10 Wrangler TJ Tail Lights – Automotive Tail Light Assemblies

As an Amazon Associate I earn from qualifying purchases.

1. Partsam

#ad

Partsam 2Pcs Universal Smoked Square Combination 38 LED Signal Tail Lights w/License Plate Lights Flatbed Trucks Brake Stop Turn Tail Light Backup Reverse Lights for Wrangler CJ TJ YJ Tail Lights 12V

#ad
Partsam #ad - These wrangler tail lights hardwired with 4-wire molded harness: white wire for ground, RVs, boats, short and extended trailers, Black wire for tail light and license plate light, buses, vans, Red wire for stop turn tail lights and Yellow wire for reverse or backup lights; This rear tail light is universal fit for 12V vehicles & trailers including trucks, flatbeds trucks and more;.

If you want to install it on wrangler trucks, you may need some modification: You may have to splice the wires yourself. Also, the bolt holes are larger than stock tj tail lights so you may need to drill out your body to make them fit. Warranty: we truly offer 1 year warranty for this smoked LED combination Tail Light! If have any questions or issues about our partsam led lights, Please feel free to us and we will reply in 24 hours;.

The entire assembly is a touch larger than stock yj tail lights as well;. Also this is not a replacement for factory mount Wrangler TJ YJ CJ JK tail lights. Both the two trailer combination tail lights have the license plate illuminator;. 38 super bright led's 16 red for stop turn tail functions, 18 white LED's for backup function and 4 white LED's for license illuminator. 12 volts dc and low ampere draw; overall dimension is about 5. 9" length x 6.
BrandPartsam #ad
ManufacturerPartsam #ad
Part NumberGTCV-0191324887

2. Vouke

#ad

Vouke 38 LED 12V Universal Tail Brake Turn Stop Licence Back up Lights for Truck Trailer Boat etc,12V Stud Mounted Lamps,Pack of 2

#ad
Vouke #ad - Universal for 12v vehicles like Truck, Van, Trailer, Boat, Lorry, caravan, bus, etc.18 white leDs for backup function. D ot compliant for street legal lighting. Resistant polycarbonate housing and acrylic lens are sealed to prevent damage from moisture and corrosion. 12 volts; Low ampere draw. 3-stud mounted design, 4 color wire connection. Each with 38 super bright leds:16 red leds for stop/turn/tail functions. 4 white leDs for license illuminator.
BrandVouke #ad
ManufacturerVOUKE US #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberVK-TL038

3. CMVT Auto

#ad

CMVT Auto Universal 38LED Brake Tail Lights, 12V, w/Backup Reverse License Rear Lights for Jeep Wrangler YJ TJ JK CJ Trailer Boat RV, Smoked Square Combination Flatbed Trucks Turn Taillights

#ad
CMVT Auto #ad - Main features: 38 super bright leds: 16 red for stop/turn/tail functions, 18 White LEDs for backup function and 4 White LEDs for license illuminatorBoth are set up for license plate lights and reverse lights. Wide application: universal for 12v vehicles like truck, van, etc.

Package& guarantee: 2pcs smoked square 12v 38led rear combination tail lights ; one year warranty with lifetime technical support-If you need any help, feel free to contact us via amazon message center. Notes: login your amazon account> choose "Your orders" > find the order ID > click "Contact seller". The bolt holes are larger than stock TJ tail lights so drilling out the body could make them fit. Weather-sealed: pmma lens for excellent clearance and good UV resistance, ABS housing for waterproof protection against moisture, shock and vibration.

Simple installation: 3 stud mount design with 4-color coded wire connection for easy installation; distance between the mounting blots is about 2"~2. 2". Also fits for pickup, bus, trailer, boat, Lorry, Flatbed, Wrangler CJ YJ TJ JK etc. Some modification is necessary when installing on Wrangler trucks- splice the wires. Notes: this is not a direct replacement for factory mount Wrangler TJ YJ CJ JK tail lights.
BrandCMVT Auto #ad
ManufacturerCMVT Auto #ad
Height2.9 Inches
Length6.5 Inches
Width5.9 Inches
Part NumberMTL01-BL-RW

4. CarLights360

#ad

For Jeep Wrangler 1987-2006 TJ Pair of Tail Light Lens Cover Only W/GASKET& SCREW R=L Driver and Passenger Side CH280810

#ad
CarLights360 #ad - Exact fit to: partslinks #: ch2808106 and OEM #: 56006514. Bulbs are sold separately. Dot and sae certified Passed stringent quality and safety standards. Screws and Gaskets are included! Unit includes lens and housing only.
BrandCarLights360 #ad
Height2 Inches
Length10 Inches
Weight0.4 Pounds
Width1 Inches
Part NumberFBA-PLX-M0-00-333-1952N-S
Model8542088279

5. LX-LIGHT

#ad

LX-LIGHT 7'' Round Black Cree LED Headlight High Low Beam Compatible with Jeep Wrangler JK TJ LJ CJ Hummber H1 H2 Pair

#ad
LX-LIGHT #ad - Dot approved dot sae hl vol 12v ly dot7-001 + e-mark approved hr-pl-e9-01. 1125 - guarantees that your lights are legal on the road, meeting section 108 requirements of the Federal Motor Safety Standards. Fitment - compatible with jeep wrangler cj-7 1976~1986;jeep cj-8 scrambler 1981~1985;jeep wrangler tj 1997-2006;jeep wrangler tj unlimited / lj 2003-2006;jeep wrangler jk 2 door 2007-2018;jeep wrangler jk 4 door unlimited 2007-2018;compatible with Jeep Wrangler JL 2018~2019 need add bracket:B07KYHBYF5 ;Lan Rover Defender 90 & 110;AM General Humer 1992~2001;Humer H1&H2 2003~2009 H2 needs 9007 male to H4 female adapter, package not included.

Over 80000 hours above life time. Color temperature:6000K. Maintenance Free, Water-proof IP67. Super bright - made with original cree chips, 50% brighter than brighter than other similar headlight.

Operating lumens output: 4500 lm high Beam, 3200 LM Low Beam for each headlight. Easy installation - plug & play, built-in anti-flicker hardness, H4 and H13 Adapter Included - Usually in 20 minutes or less, no need extra decoder anymore!. Your dot-compliance is clearly etched on the lens of the light. Package included - 2 x 7 inch led headlight + 2 x H4 to H13 adapter + 1 Installation guide.
BrandLX-LIGHT #ad
ManufacturerLX-LIGHT #ad
Height3 Inches
Length7 Inches
Width7 Inches
Part NumberSL-0075A-black
ModelSL-0075A-black

6. Partsam

#ad

Partsam 2x Red/White 39 LED Stop Turn Tail Stud Lights Replacement for Jeep CJ YJ JK Truck Trailer Boat RV, Hardwired

#ad
Partsam #ad - Partsam lights are impact resistant and less susceptible to shock damage; Each LED is directly wired and water-tight sealed. Each one is equiped with 39 super bright leds: 12 red led as stop Turn Tail Lights, 21 White LED as Reverse Lights, 6 White LED as License Plate illuminator.

Size: 170mm x 145mm x 60mm 6. 7'' x 5. 7'' x 2. 4''; wire length: 150mm 6''. This square stop turn tail light is universal for 12v vehicles like truck, van, etc. Wire connection tips: black wire is the ground; white wire, we need make the wire connect, red 12 led works with high brightness as Brake/Turn Light;Please note this one is NOT plug and play, White 21 LED on the upside Works as Reverse Light; Red Wire, red 12 led works with low brightness as tail light and bottom white 6 led works as License Plate Light; Yellow Wire, because this one never come with the plug, just come with the wires.

Also you may need to diy to suit for jeep yj jk wrangler, Trailer, Boat, bus, Lorry, Jeep CJ CJ-7 NOT factory Jeep light ;.
BrandPartsam #ad
ManufacturerPartsam #ad
Part NumberGTCV-0606106310
Model13

7. Nilight

#ad

TL-21 2PCS 39 LED Universal Stop Turn Tail Light for Truck Trailer Boat Jeep, 12V Stud Mounted Red/White Lamp, 2 Years Warranty, Nilight

#ad
Nilight #ad - Multi-function combination: each light comes with 39 leds, medium 12 Piranha LED for red stop turn tail light, top 12 LED for white reverse light, bottom 6 LED for white license plate light.

Durable material: made of durable polycarbonate lens and ABS housing, awesome quality to protect the light from water, dust, dirt and bad weather. 4 colors wire connection: colors wire connection, black+ yellow for reverse light, black + red for high brightness stop turn light, wire length: 6”. Easy installation: each light is 3 stud-mounted design, stud size : 5mm in diameter.

Wide application: universal for 12v vehicles like truck, bus, Lorry, Van, Boat, Trailer, etc. Black wire for ground, black+ white for low brightness tail light and white license plate light. Fit type: Universal Fit. Also suitable for jeep jk YJ Wrangler NOTE: YJ model needs modification. Fit most of the existing holes and simple to install on the exterior of any vehicle.
BrandNilight #ad
ManufacturerNilight #ad
Part NumberTL-21
ModelTL-21
Warranty2 Years Warranty

8. EAG

#ad

EAG Black Textured Off Road Taillight Tail Light Euro Guards Steel Protector Fit for 87-06 Wrangler TJ YJ

#ad
EAG #ad - Protect and upgrade the look of your Wrangler. Sold in pairs. Black powder coat for corrosion protection and durability. Heavy duty 3/4" Steel Tubing. Foam rubber padded back plate can protect vehicle paint. These taillight guards are steel construction. Fits: fit for 1987-2006 wrangler YJ/TJ. Only fit for Euro Taillight. The isolation rubber pad helps to eliminate the collision when mounted to the vehicle. Easy installation.
BrandEAG #ad
ManufacturerEAG #ad
Height7.87 Inches
Length9.84 Inches
Weight6.39 Pounds
Width7.87 Inches
Part NumberJTJLB000

9. RT-TCZ

#ad

RT-TCZ Metal Tail Light Guards Covers for Rear Taillights 1987-2006 Jeep Wrangler YJ TJ Accessories TJ-US Flag

#ad
RT-TCZ #ad - Package included : a set of 2pcs of Tail Light Guards Covers Includes mounting screws. Protects Tail Light from damage. Fits all 1997-2006 jeep Wrangler TJ. Paint baking on surface and no rust, corrode or peel. Easy to install and no need any drilling, enhance the Appearance & Style of your Vehicle. Durable material:crafted from High Quality Metal.
BrandRT-TCZ #ad
ManufacturerRT-TCZ #ad
Part NumberRT-TCZ
Model8542086518

10. Max-Bilt

#ad

Max-Bilt Jeep Wrangler Round Trail Tail LED Tail Lights TT-150

#ad
Max-Bilt #ad - Designed to take trail abuse and have an extra tough circuit board with poly resin to keep them waterproof. Combination brake, running, turn, and reverse. Follows max-Bilt's pursuit of high quality and durability. Max-bilt no bs lifetime warranty. Will fit any cj, tj, scout 80, YJ, 800 or any flat mounting surface. Slim profile and come as a pair.
BrandMax-Bilt #ad
ManufacturerMax-Bilt #ad
Height1.5 Inches
Length11.5 Inches
Weight2 Pounds
Width5.25 Inches
Part NumberTT-150