Top 10 Winch Mount Receiver Hitch – Towing Winch Mounts

As an Amazon Associate I earn from qualifying purchases.

1. Extreme Max


Black, Extreme Max 5600.3084 Universal 2" Receiver Hitch Winch Mount for ATV / UTV

Extreme Max #ad - Plate dimensions: 5-5/8" wide x 6-1/8" length. Heavy gauge powder-coated steel mounting plate fit winches up to 3600 lbs. Universal design, pre-drilled for 2 and 4-bolt winches, and hawse or roller fairleads. Winch mount fits any 2" receiver hitch for multiple applications: ATV, lawn and garden equipment, UTV, etc.
BrandExtreme Max #ad
ManufacturerExtreme Max #ad
Height2.4 Inches
Length12.7 Inches
Weight5.4 Pounds
Width5.9 Inches
Part Number5600.3084
WarrantyTwo-year limited warranty



ECOTRIC 10x 4 1/2 Cradle Winch Mount Mounting Plate 13,000 Lb Capacity Recovery Winches with One Year Warranty

ECOTRIC #ad - Anti-rust black Powder Coat Finish. Made of 1/5" steel. There is only one plate in the package and the winch is not included. Perfect for 8000 lbs to 13000 lbs Winches. Drilling may be required. 10" x 4-1/2" standard winch mount pattern. 10" on center fairlead Bolt Pattern The handles are not adjustable. It would properly accommodate a Warn winch either.
BrandECOTRIC #ad
Manufacturerego #ad
Part NumberRACK-A23



X-BULL Universal Winch Cradle Mounting Plate for Recovery Winches

X-BULL #ad - The handle in the center guide bolt mode is not adjustable. Bolts and clamps are included. Guarantee: x-bull promises that you will receive the photos exactly as described! Suitable for truck, 4x4, trailer and any four-wheel drive vehicle.

Convenient for you to carry the mounting plate to any place, ATV, saving a lot of space. The x-bull winch mounting plate is your best choice. Rust-proof black powder finish made from 1/5 inch steel. Heavy steel structure, strong and durable, long service life. As well as the 10" top center guide bolt mode and the 10" x 4 1/2" standard winch mounting mode, everyone can easily install this cradle winch. 10" x 4-1/2" standard winch installation mode for 8, 000 to 15, 000 pound winches.
BrandX-BULL #ad
ManufacturerAM0009 #ad
Part NumberAM0009



ORCISH Bumper Hitch Receiver Winch Mount Mounting Plate, Winch Cradle Mounting Plate- 15000 Lb Capacity

ORCISH #ad - 15, 000 large carrying capacity:perfect for 8000 lb to 15000lb winches, heavy duty construction and is designed to mounting a self recovery winch to your vehicles. Everyone can use this cradle winch mount easily. Easy installation:package includes hitch pin and clip, as well as 10" on center fairlead bolt pattern and 10" x 4 1/2" standard winch mount pattern ensure the installation is more convenient.

Folding design for easy carry and store:the folding size of 13. 78"x1043" is convenient for you to store the mounting plate anywhere and carry it with you, saving a lot of space. Professional after-sales team: all kits are provided with lifetime technical support and one-year limited warranty.

If there is any problem during the purchase period, please contact us at any time, and we will provide the most professional and timely service. Heavy duty steel construction:this winch mounting plate features heavy duty steel a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state, insures its long lifespan.
BrandORCISH #ad
ManufacturerORCISH #ad
Part NumberAY1-AT22

5. Guide Gear


3500 lbs, Truck, 2" Receiver, UTV, Guide Gear Universal Winch Mount for ATV

Guide Gear #ad - It’s ultra-strong for hauling heavy loads. Durable – made from a powder-coated steel that’s resistant to weather, corrosion and rust.

A handy addition to your truck accessories. Winch mount – the truck hitch allows you to connect a 2-bolt or 4-bolt winch to your truck, ATV or UTV. Universal – the winch cable mount is compatible with any 2” receiver for use on ATVs, UTVs and trucks. Easy installation – the portable winch mount is pre-drilled for 2 and 4-bolt winches and made for easy installation on any vehicle. Strong – the tow hitch mount has a tensile strength of 3, 500-lbs.
BrandGuide Gear #ad
ManufacturerGuide Gear #ad
Height2.5 Inches
Length13.25 Inches
Weight5.5 Pounds
Width6.5 Inches
Part Number10210025

6. KFI Products


Black, KFI Products 100620 2" Universal Receiver Carrier Mount with Handle

KFI Products #ad - Heavy duty welded 1-Piece Design. Requires a winch that comes with the Fairlead Bracket. Works with most standard 2" Receiver Hitches. 100% made in usa. Constructed of 3/16" GR50 steel and powder coated black.
BrandKFI Products #ad
ManufacturerKFI Products #ad
Height0 Inches
Length0 Inches
Weight10.5 Pounds
Width0 Inches
Part Number100620



Universal 2" Trailer Hitch Winch Mounting Bracket for ATV UTV Truck, BUNKER INDUST Receiver Hitch Winch Cradle Mount Plate

BUNKER INDUST #ad - It can hold the weight and serve as a shield, guarding your winch against rock damage and debris while you are blazing an off-road trail. Standard fit-this receiver hitch winch mount plate is equipped with a standard 2-inch shank and has three mounting holes for an adjustable design, which fit any industry-standard 2-inch x 2-inch trailer hitch receiver hitch pin not include.

Front or rear mounted-this trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installed. Protect your winch-this winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan. Durable construction-features a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state.

Universal winch mount plate-winch mount bracketprovides a solid mounting place for your winch, utv or truck. And pre-drilled winch mount fits most winches, allowing you to attach a winch to your ATV, installed according to your need. This winch plate is suitable for winches rated between 1, 300 to 16, 500 lbs.
ManufacturerBUNKER INDUST #ad



PLIOSAUR Winch Mount Plate, 15000Lbs Capacity Winch Mounting Hitch, Recovery Winch Cradle, Bumper 2'' Hitch Receiver with Folding Bracket,10" x 4 1/2"

PLIOSAUR #ad - Installation method:the installation method is simple and easy to use, and can be directly installed on the frame. Capacity range:suitable for 8000 to 15000 lbs winches. Suitable vehicles:standard universal dimensions ensure mounting plates are suitable for trucks, 4x4, trailers, ATV, and any 4WD vehicle. Mounting dimension:suitable for standard 10 "x4-1/2" mounting plates. Product material:the mounting plate is made of high-strength steel for ultimate strength and rigidity, while the housing is black rust resistant powder coated for corrosion resistance.
ManufacturerPLIOSAUR #ad
Part NumberPSR-TB22



7BLACKSMITHS 10" x 4 1/2" Cradle Winch Mounting Plate Winch Mount Recovery Winches Bumper 2'' Hitch Receiver 15000 Lb Capacity

7BLACKSMITHS #ad - Anti-rust black Powder Coat Finish. 10" on center Fairlead Bolt Pattern. Standard 10" x 4-1/2" winch mount pattern. Cradle winch Mount Style. Ideal for 8000 lbs to 13, 000 lbs winches.
Manufacturer7BLACKSMITHS #ad
Part NumberBLR23



Bumper 2'' Hitch Receiver with Folding Bracket, OFF ROAD BOAR Universal Winch Mount Plate, 15000Lbs Capacity Winch Mounting Hitch , Recovery Winch Cradle

OFF ROAD BOAR #ad - Multiple installation methods: there are 3 screw mounting holes on both sides of the base, and the installation method can be selected according to actual needs;This specially engineered winch mount can be easily mounted to both front and rear of the vehicle, which could greatly expand its versatility in use.

It takes up less space and can be easily taken out and installed quickly when needed;. Suitable for most vehicles: the standard universal size ensures that the mounting plate is suitable for any four-wheel drive vehicle: truck, 4x4, trailer, ATV, etc. Flexibility & compatibility: this winch mount hitch reciever is suitable for standard 10"x4-1 / 2" winch rated between up to 8, 000 -15, 000 pounds winch;.

Premium choice: the winch mounting plate applies fabricated steel in the manufacturing of this winch mount for ultimate strength and rigidity, and corrosion-resistant housing for superior durability. Easy to store: the folding size of this hitch winch mount is 13. 78" x1043", and it can be easily stored and placed in the trunk of the car without disassembly.
ManufacturerOFFROAD BOAR #ad
Part Number56451331327