Top 10 Wheel Bearing Grease Packer – Bearing Pullers

As an Amazon Associate I earn from qualifying purchases.

1. Lisle

#ad

Lisle 34550 Handy Packer Bearing Packer

#ad
Lisle #ad - Quickly flushes out Old Grease and Repacks Bearings with Less Mess. The grease stays in the tool cavity, not on your hands. To pack a bearing, place the bearing on the piston. The handy packer works on bearings up to 3 1/2" O. D. Press down on the cap until the old grease is forced out and the new grease shows on top of the bearing.
BrandLisle #ad
ManufacturerLisle #ad
Height9.5 Inches
Length6.3 Inches
Weight0.85 Pounds
Width5 Inches
Part Number34550
Model34550
WarrantyLimited Lifetime

2. GEARWRENCH

#ad

2775D, GEARWRENCH Hand Bearing Packer

#ad
GEARWRENCH #ad - Transparent, impact resistant cup allows grease level check. No air line or grease gun required. Use on all cage-type roller and ball bearings up to 2" bore. Packs 50 to 60 bearings without refilling. Self-contained bearing packer saves time and can be used anywhere.
BrandGEARWRENCH #ad
ManufacturerK-D Tools #ad
Height7 Inches
Length7 Inches
Weight0.9 Pounds
Width4.5 Inches
Part Number2775D
Model2775D

3. Lumax

#ad

Lumax LX-1310 White 1/2" Inner Diameter / 4-1/2" Outer Diameter Plastic Universal Bearing Packer. for use on All Grease Guns. Can be Used with Either Hand-Operated or Power Lube Equipment

#ad
Lumax #ad - Easily lubricates most bearings. For use on all Grease Guns. Universal bearing packer, plastic, Bearing Size : 1/2" ID/4-1/2" OD. Lightweight yet rugged construction. Threaded center post for positive locking.
BrandLumax #ad
ManufacturerLumax #ad
Height2.4 Inches
Length8.1 Inches
Weight0.3 Pounds
Width5.5 Inches
Part NumberLX-1310
ModelLX-1310
Warranty1 year

4. Lisle

#ad

Lisle 65250 Bearing Packer

#ad
Lisle #ad - Simply place the bearing between the plastic cones, tighten and apply grease through the fitting on the end of the threaded shaft. Forces out old grease and evenly injects fresh grease. Cone diameter is 4-1/2 inch. Country of Origin : China.
BrandLisle #ad
ManufacturerLisle #ad
Height3.5 Inches
Length10.5 Inches
Weight0.3 Pounds
Width7 Inches
Part Number65250
Model65250
WarrantyLimited Lifetime

5. Allstar

#ad

Allstar ALL78241 Timken Brand Premium Red Type Wheel Bearing Grease 16 oz. Tub

#ad
Allstar #ad - Backed by a 90-day limited factory warranty. Sold each. Comes in a 16 ounce tub. Grease contains corrosion inhibitors and anti-wear and water-resistant additives, offering superior protection in challenging environments. This timken brand of wheel bearing grease is a premium, hi-temp, red grease is specifically formulated to handle the demands of both disc and drum bearing applications.
BrandAllstar #ad
ManufacturerAllstar Performance #ad
Height3.7 Inches
Length4.1 Inches
Weight1 Pounds
Width4 Inches
Part NumberALL78241
ModelALL78241
Warranty90 days

6. Plews & Edelmann

#ad

Plews & Edelmann 70-025 Deluxe Bearing Packer

#ad
Plews & Edelmann #ad - For use with either hand operated or power lube equipment. For bearings having a minimum id of 1/2 inch to maximum OD of 5 inches and height of 1/4 inch to 2 inches. Made with rugged steel construction. Threaded center post for positive locking of wheel bearing.
BrandPlews & Edelmann #ad
ManufacturerPlews #ad
Height9.13 Inches
Length3 Inches
Weight0 Pounds
Width7.13 Inches
Part Number70-025
Model70-025
Warranty90 Day Limited Warranty

7. Valvoline

#ad

Valvoline Moly-Fortified Gray Full Synthetic Grease 1 LB

#ad
Valvoline #ad - Helps inhibit rust and oxidation. Fortified with extreme pressure additives for exceptional load-carrying capability. Moly-fortified for increased film strength. Nlgi #2 gc-lb lithium complex EP grease.
BrandValvoline #ad
ManufacturerValvoline #ad
Height3.75 Inches
Length4.09 Inches
Weight0.5 Pounds
Width4.09 Inches
Part NumberVV986
ModelVV986

8. Orion Motor Tech

#ad

Orion Motor Tech 10pcs Bearing Race and Seal Bushing Driver Install Set 9 Discs Collar Axle Housing with Carrying Case Master/Universal Aluminum Bush Drive Seal Kit for Automotive Wheel Bearings

#ad
Orion Motor Tech #ad - Ultra sturdiness & durability: forged from high strength aluminum for extra durability and strength, the driver and discs feature extraordinarily long service life and won’t mark the bearings.

Versatility: collars/discs of 9 different sizes fit standard races used in most wheel bearing applications. Our super sturdy and well-designed tool set guarantees long service life without damaging your bearings. Easy usage: to use, simply select the correct bushing, align straight and centered, motorcycles, small engine trucks, and then pound in/out. Suitable for seating bearings on cars, etc.

All-in-one: our 9-disc and 1-driver set simplifies bearing installation for everyone from master mechanics to DIY novices. The solid, knurled handle offers extra grip and control during use. Convenient storage: this set comes in a blow-molded plastic carrying case for easy transport, simple storage, and quick organization.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height6.18 Inches
Length10.43 Inches
Width4.13 Inches
Part NumberBJS001000

9. ABN

#ad

ABN Bearing Race and Seal Bush Driver Set with Carrying Case – Master/Universal Kit for Automotive Wheel Bearings

#ad
ABN #ad - Durable: constructed from high-strength aluminum for extra strength and longevity; Won't mar the bearing. Sizes: includes 1 driver and 9 collar/discs: 1. 565", 1.

965", 2. 830", 2. 555", 2. 470", 2. 995", 3. 180"; listed diameter is the diameter at the larger top side of the taper, 1. 750", 2. 325", not the end closest to the handle. Compatible: collars fit standard race sizes used in most wheel bearing applications. Practical: the abn bearing race and seal bush driver set with Carrying Case – Master / Universal Kit for Automotive Wheel Bearings allows for easy race seal installation without damaging the axle housing. Easy storage: heavy-duty 10” x 5. 8” x 4” 25. 4cm x 14. 7cm x 102cm blow-molded plastic carrying case for easy transport, simple storage, and quick organization.
BrandABN #ad
ManufacturerABN #ad
Height4 Inches
Length10 Inches
Weight3.44 Pounds
Width5.75 Inches
Part Number9994
Model13

10. Tiger Tool

#ad

Tiger Tool Jansen Motorsports 44mm Wheel Bearing Greaser for Polaris RZR 900/1000

#ad
Tiger Tool #ad - Knurled surface provides a non-slip grip and machined from high-grade 6061 T6 Aircraft Aluminum. Tapered housing with o-ring seal prevents excessive grease from escaping while applying. See compatibility chart in Product Description for compatible ATV, UTV or SxS models. Designed to fit polaris rzr 900 / 1000 and Ranger models with a 44mm wheel bearing PRO XP Not Compatible. Internal step bore provides clearance for CV shaft reducing backpressure.
BrandTiger Tool #ad
ManufacturerTIGER TOOL #ad
Part Number1.001.003
Model1.001.003