As an Amazon Associate I earn from qualifying purchases.

Replace number - transmission cooler hose fitting replace number is 700R4, TH400, TH350, NP-700RTL. Compatible with - for turbo 350 some are 1/4" npt, for turbo 200 - 200r4, for 700r4 - 4l60 - 4l60e - 4l65e, for 4l80e: 1995 & older, for Power Glide Some are 1/4" NPT, for Turbo 400, for Ford C4 - C6 - AOD. Package include - about 52 inch and 3/8" i. D.


B> potentially reduces oil temperature up to 50°F Water Pressure Test: 12bar. This oil cooler design smaller and lightweight suitable for narrow space and satisfy more rows at the same time.
Choose a reasonable spot to install. But they must be locations where there will be a good, cold airflow through the cooler. Choose the right adapter for your demands. Others :the universal oil cooler basically just cools the oil down, the greater the surface area, the more air we have and the more tubes we have exposed to the air and the more heat we can dissipate or get rid of. Inlet / outlet size: 8 an. We also provide an10 oil cooler and so on, welcome to search it from our shop.


Size:10an 16row oil cooler, oil capacity:039l. Test pressure: 116psi, burst pressure:232psi. Material:aluminium alloy. Package include:1pc 16row engine oil cooler. 2pcs 10an female to 8an male fittings, 2pcs 10an female to 6an male fittings.
Usable to cool down engine oil, prevent parts damage, and rear-differentials. Besides, this stacked-plate oil cooler design smaller and lightweight suitable for narrow space. Installation location:choose a place with good and cold air through the oil cooler kit for installation. Instruction included.

Best for the brake system, fuel pump, 500 PSI Pressure Tolerance, ect.
It also results in more fluidity in transmission. Oil resistant, and ethanol tolerance. High quality material - the high pressure fuel line covered with high quality woven Nylon and 304 stainless steel braided + CPE synthetic rubber to enhance flexibility and give a cool racing appearance. Our braided fuel line is also an excellent alternative to conventional fuel lines, cold-resistant, the 6an hose can be applied to higher-intensity temperature and pressure environments.



1. Derale
#ad
Derale 13700 Electra-Cool Remote Cooler,Black
#adDerale #ad - Product dimensions - 15. 75 x 11. 5 x 5 inches. Designed for transmission, power steering and fuel cooling. Dramatically extends engine and transmission life. 16 pass tube and fin cooler. Electric fan supplies optimum airflow. Mounts anywhere space permits. Fit type: Vehicle Specific.More information #ad
Brand | Derale #ad |
Manufacturer | Derale #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 8.5 Pounds |
Width | 0 Inches |
Part Number | 13700 |
Model | 13700 |
Warranty | Limited One Year |
More information #ad
2. TIKSCIENCE
#ad
Replace 700R4/ TH350/ TH400/ NP-700RTL, Fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks, 6AN SS Transmission Cooler Hose Fitting, Stainless Steel Braided Lines
#adTIKSCIENCE #ad - Stainless steel braided hoses; an6 flared to 1/4" npt adaptors fits most 700r4, TH350, TH400; AN6 flared to 3/8" NPT adaptors; 90 Degree AN-6 Inverted flare to AN-6 flare adaptors. Product size- this stainless steel flexible braided transmission hoses, muscle car, each 3/8" inner diameter hose is approximately 52" in length, Custom, hot rod, and comes with an AN-6 inverted torch end; single-channel and dual-channel coolers are installed; the universal kit is perfect for you Rat Rod, Street Rod, etc.More information #ad
Fitment - transmission cooler hose fitting fit for chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks. Universal kit for rat rod, street rod, hot rod, muscle car, custom and others. Replace number - transmission cooler hose fitting replace number is 700R4, TH400, TH350, NP-700RTL. Compatible with - for turbo 350 some are 1/4" npt, for turbo 200 - 200r4, for 700r4 - 4l60 - 4l60e - 4l65e, for 4l80e: 1995 & older, for Power Glide Some are 1/4" NPT, for Turbo 400, for Ford C4 - C6 - AOD. Package include - about 52 inch and 3/8" i. D.
Brand | TIKSCIENCE #ad |
Manufacturer | TIKSCIENCE #ad |
Model | 700R4 |
More information #ad
3. Derale
#ad
Derale 13300 Tube and Fin Cooler Core
#adDerale #ad - Replacement 16 pass tube and fin style cooler core for -6AN Electra-Cool remote oil and transmission coolers. Dimension: 13 1/2 x 10 3/8 x 1 3/4.More information #ad
Brand | Derale #ad |
Manufacturer | Derale #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 4.25 Pounds |
Width | 0 Inches |
Part Number | 13300 |
Model | 13300 |
Warranty | Limited One Year |
More information #ad
4. LineRacing
#ad
30Row AN8-8AN Stacked Plate Oil Cooler 6AN Adapter Universal Engine Transmission Aluminium Silver Silver, 30Row
#adLineRacing #ad - Function: keep the oil temperature low to prevent damage, when the oil breaks down, it creates friction and that heat from that friction is transmitted into the oil and than the oil over heats, or even seizure of the engine. Mounted in a reasonable spot where it is getting good air you have oil coming from the engine into here and then coming back and cooling it and making sure that it is within a certain operating temperature.B> potentially reduces oil temperature up to 50°F Water Pressure Test: 12bar. This oil cooler design smaller and lightweight suitable for narrow space and satisfy more rows at the same time.
More information #ad
B> the position of the engine oil cooler should not be near or next to exhaust components, thrown gravel, ice, water or road grime. When your engine spins under high load at high rpm, it doesn't lubricate well and reduces your engine life over time. Choose a reasonable spot to install. But they must be locations where there will be a good, cold airflow through the cooler. Choose the right adapter for your demands. Others :the universal oil cooler basically just cools the oil down, the greater the surface area, the more air we have and the more tubes we have exposed to the air and the more heat we can dissipate or get rid of. Inlet / outlet size: 8 an. We also provide an10 oil cooler and so on, welcome to search it from our shop.
Brand | LineRacing #ad |
Manufacturer | LineRacing #ad |
Part Number | agswea-001 |
More information #ad
5. Hayden Automotive
#ad
Hayden Automotive 689 Rapid-Cool Plate and Fin Transmission Cooler
#adHayden Automotive #ad - Gvwr up to 30, 000 pounds, towing up to 10, 000 pounds. Size is 3/4 inch x 11-5/8 inch x 11 inch extra heavy duty. Class "a" motor homes, large travel trailers, 5th wheel trailers.More information #ad
Pre-drilled mounting brackets for easy installation. Equipped with 6 male flare fittings allowing cooler to be hard plumed into system.Brand | Hayden Automotive #ad |
Manufacturer | Hayden Automotive #ad |
Height | 2 Inches |
Length | 14 Inches |
Weight | 2.85 Pounds |
Width | 12 Inches |
Part Number | 689 |
Model | 689 |
Warranty | 1 year or 12K Miles |
More information #ad
6. EVIL ENERGY
#ad
EVIL ENERGY 16 Row AN10-10AN Stacked Plate Oil Cooler Universal Engine Transmission Aluminium Alloy Black
#adEVIL ENERGY #ad - Universal:universal oil cooler, you may need to do some custom modifications and require other hardware to meet your needs. Please measure before purchase to make sure there is enough space for installation.Size:10an 16row oil cooler, oil capacity:039l. Test pressure: 116psi, burst pressure:232psi. Material:aluminium alloy. Package include:1pc 16row engine oil cooler. 2pcs 10an female to 8an male fittings, 2pcs 10an female to 6an male fittings.
More information #ad
Can be used to connect 8AN / 6AN braided fuel line hose ends. Function:keep oil temperature low, transmission, help to improve the lubricating effect of engine oil, or even seizure of the engine. Usable to cool down engine oil, prevent parts damage, and rear-differentials. Besides, this stacked-plate oil cooler design smaller and lightweight suitable for narrow space. Installation location:choose a place with good and cold air through the oil cooler kit for installation. Instruction included.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Part Number | KT04018BK-AMZ1 |
More information #ad
7. Byredio
#ad
2000 psi High Pressure & Tamper Resistant 8.71mm ID, Byredio 3/8 Fuel Line Braided 6AN 10ft Transmission Cooler Hose for Oil,Gas,Fuel,Hydraulic 500
#adByredio #ad - Wide application - the 6an fuel line specially designed to compatible with any fuel including methanol and nitromethane, brake, pump gas, diesel, hydraulic fluid, transmission, coolant, oil, clutch, and nitrous oxide. Nylon braided - the braided fuel line can stand -100℉ to 500℉ -73°c to + 260°c, and transmission system, fuel return system, fuel filter, oil return, oil cooler kit, turbo cooler system, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, 500 PSI Pressure Tolerance, ect.
More information #ad
Steel, aluminum, or plastic lines will not bend as easily as this tube. Flexibility - the highlight of this fuel line is its sublime pliability. Cut the size as you want - the 6an fuel line is 10 feet / 3 m, can be cut to size for all your applications. The superior bending ability of this fuel tube makes it easier to install. It also results in more fluidity in transmission. Oil resistant, and ethanol tolerance. High quality material - the high pressure fuel line covered with high quality woven Nylon and 304 stainless steel braided + CPE synthetic rubber to enhance flexibility and give a cool racing appearance. Our braided fuel line is also an excellent alternative to conventional fuel lines, cold-resistant, the 6an hose can be applied to higher-intensity temperature and pressure environments.
Brand | Byredio #ad |
Manufacturer | Big Garage #ad |
Height | 2 Inches |
Length | 7 Inches |
Width | 7 Inches |
Part Number | bg-sku04 |
More information #ad
8. Derale
#ad
Derale 13315 Series 7000 Tube and Fin Cooler Core,Black
#adDerale #ad - Embossed turbulators inserted in each tube agitate fluid for maximum heat transfer. 1/2 inch copper tubing expanded into aluminum cooling fins. Extruded plastic cooling fin guards. 10 pass cooler design.More information #ad
Brand | Derale #ad |
Manufacturer | Derale #ad |
Height | 1 Inches |
Length | 23.75 Inches |
Width | 17.5 Inches |
Part Number | 13315 |
Model | 13315 |
Warranty | Limited One Year |
More information #ad
9. Hayden Automotive
#ad
Hayden Automotive 687 Rapid-Cool Plate and Fin Transmission Cooler
#adHayden Automotive #ad - Gvwr up to 20, 000 pounds, towing up to 2, 500 pounds. Equipped with 6 male flare fittings allowing cooler to be hard plumed into system.More information #ad
Pre-drilled mounting brackets for easy installation. Size is 3/4 inch x 7-1/2 inch x 11 inch medium duty. Fit type: Vehicle Specific. Mid-size and full-size cars, pick-ups.Brand | Hayden Automotive #ad |
Manufacturer | Hayden Automotive #ad |
Height | 13.63 Inches |
Length | 1.91 Inches |
Weight | 2.2 Pounds |
Width | 11.31 Inches |
Part Number | 687 |
Model | 687 |
Warranty | 1 year or 12K Miles |
More information #ad
10. Derale
#ad
Derale 13316 Series 7000 Tube and Fin Cooler Core
#adDerale #ad - 1/2 inch copper tubing expanded into aluminum cooling fins. Extruded plastic cooling fin guards. 6 pass cooler design. Embossed turbulators inserted in each tube agitate fluid for maximum heat transfer.More information #ad
Brand | Derale #ad |
Manufacturer | Derale #ad |
Height | 1 Inches |
Length | 23.75 Inches |
Weight | 1.65 Pounds |
Width | 11.38 Inches |
Part Number | 13316 |
Model | 13316 |
Warranty | Limited One Year |
More information #ad