Top 10 Rock Sliders 4Runner – Running Boards

As an Amazon Associate I earn from qualifying purchases.

1. Tyger Auto

#ad

Tyger Auto TG-AM2T20148 Star Armor Nerf Bars | Fit 2010-2020 Toyota 4Runner Trail Edition & 2014-2020 Toyota 4Runner SR5/TRD Pro

#ad
Tyger Auto #ad - Up to 500 lbs weight capacity for each side. Tyger unique patented star metal step pads serve a helpful step in and out of the cab.

Compatible with 2010-2020 toyota 4-runner trail edition & 2014-2020 4-Runner SR5 / TRD Pro. Easy bolt-on installation. Heavy-duty 2inch diameter tubes. One-piece design. Particularly useful on lifted pickup trucks & SUVs. Dual girder system provides maximum protection for underside from damaging impacts. Diy instruction included in the package. Dual stage powder coated textured black finish. Tyger no-hassle 5 year warranty against manufacturing defects! No drilling required.
BrandTyger Auto #ad
ManufacturerTyger Auto #ad
Height5.08 Inches
Length66.14 Inches
Weight84 Pounds
Width6.6 Inches
Part NumberTG-AM2T20148
ModelTG-AM2T20148
Warranty5 Year

2. n-FAB

#ad

N-FAB Nerf Step RS | 710416412 | fits 10-19 Toyota 4 Runner Non-Limited

#ad
n-FAB #ad - Textured black powder coat finish complements the look of your truck. Back by a 5-year Finish and Lifetime Workmanship. Fit type: Vehicle Specific. Mounting brackets are welded onto the steps for added strength and ease of install. Comes with driver and passenger side steps. Fits 10-19 toyota 4 Runner Non-Limited. Large enclosed drop down step plate at each door opening of the vehicle. 2” main bar fits tight to the body of the truck for a clean, integrated look and feel.
Brandn-FAB #ad
ManufacturerN-FAB #ad
Height11 Inches
Length78 Inches
Weight51 Pounds
Width14 Inches
Part Number710416412
Model710416412
Warranty5 year Finish Warranty, Lifetime Workmanship Warranty

3. Trail Gear

#ad

Trail Gear ROCK SLIDER KIT 120001-1-KIT

#ad
Trail Gear #ad - Standard cab, Short Bed. Universal 58". One pair the mounting legs are not welded onto the slider, so they allow the sliders to stick out far enough to be used as a step if desired. Compact to mid-Size 2-Door. Frame mounts sold separately - 542-120007-1 Made out of 1 3/4" OD x. 120 wall 1035 domsix mounting legs, but are shipped loose so that legs can be attached in different mounting positions. Mounting legs are pre-notched on one side and can be trimmed if needed on the opposite side. Mounting legs are 11 1/4" long, three per sideShipped raw with no finish.
BrandTrail Gear #ad
ManufacturerTrail Gear #ad
Height5 Inches
Length58 Inches
Weight63.4 Pounds
Width9 Inches
Part Number120001-1-KIT

4. Trail Gear

#ad

Trail Gear Rock Slider Kit 67" 120002-1-KIT

#ad
Trail Gear #ad - Comes with full manufacturer warranty. Fits multiple makes and models contact seller with your vehicle for fitment compatibility information.
BrandTrail Gear #ad
ManufacturerTrail Gear #ad
Weight60 Pounds
Part Number120002-1-KIT

5. n-FAB

#ad

N-FAB T0365R Textured Black Nerf Step; Wheel 2 Wheel Toyota 4 Runner SUV 4 Door 03-09

#ad
n-FAB #ad - Install notes: will not fit vehicles with cladding below doors, Direct Bolt-On. 4-stage powder coating process creates a long lasting finish that will handle the most extreme enviroments, backed by a 5-Year Finish Warranty.

Trend-setting nerf steps, built with a 2" Main tube that fits tight to the body with steps positioned at each door that allows the ultimate access for all passengers on stock or lifted vehicles. 100% welded construction creates a true 1-piece assembly that allows for ease of install and for the ultimate in strength, rigidity and durability through the most extreme use. Steps are sold in pairs, Metal dimpled step plate allows superior traction and stability in any weather condition.
Brandn-FAB #ad
ManufacturerN-Fab #ad
Height11 Inches
Length79 Inches
Weight52 Pounds
Width14 Inches
Part NumberT0365R
ModelT0365R
WarrantyFINISH WARRANTY STAINLESS STEEL: LIMITED LIFETIME WARRANTY POWDER COATED: FIVE YEAR LIMITED WARRANTY CUSTOM FINISH: ONE YEAR LIMITED WARRANTY CRAFTSMANSHIP WARRANTY ALL N-FAB PRODUCTS ARE BACKED BY A LIFETIME WARRANTY AGAINST FAILURES IN MATERIALS AND WORKMANSHIP.

6. EAG

#ad

EAG Steel Running Boards Compatible with 2010-2020 4Runner Side Step Rails | Nerf Bars | Side Armor

#ad
EAG #ad - Heavy-duty construction - eag running boards are made from heavy-duty 1/8” steel plates and 2”x. 120 wall steel tubing, black powder-coated finish for UV protection.

Install the supplied mounting brackets on the vehicle and then place the running board onto them. Welded end caps - this design prevents deformation and rust at both ends of the pipe. Dual function - dual girder system provides the ultimate protection for the sides and under section of your vehicle. Fitment - only fit for 2010-2020 toyota 4runner exclude 2010-2013 sr5 & 2017-2019 TRD All Model & 2010-2020 limited Model & 2020 Nightshade Model. Body mount installation - sturdy brackets bolt directly up to factory holes.
BrandEAG #ad
ManufacturerEAG #ad
Weight102.07 Pounds
Part Number10T4RB00

7. Go Rhino!

#ad

Go Rhino 67427T 415 Series Textured Black Side Step for Toyota Cab Length

#ad
Go Rhino! #ad - Vehicle-specific mounting brackets and hardware included. 5-year warranty on textured black powder coat finish and composite end caps. Slip resistant step pads. Application: 2010-2020 Toyota 4Runner. Bolt-on installation. Oe style with 15 degree bends on the ends for a sleek look.
BrandGo Rhino! #ad
ManufacturerGo Rhino #ad
Height0 Inches
Length0 Inches
Weight10.25 Pounds
Width0 Inches
Part Number67427T
Model67427T
Warranty5 Year

8. ARIES

#ad

Select Toyota 4Runner, ARIES 2074150 Black Steel Rocker Step Guard Running Boards

#ad
ARIES #ad - Extra protection. No-drill. For lasting resilience to the rigors of the outdoor elements, these rocker guard steps are covered in a dual finish of E-coat and durable textured black powder coat.

Rocker steps are ideal for offroad trucks and Jeeps. With their heavy-duty design, these side steps also provide your truck with extra side protection. Solid step. These rocker guard boards have rigid, pre-welded brackets to fit select model years of the Toyota 4Runner. They mount high and tight against the rocker panels for added ground clearance, while helping to protect the vehicle sides and offering a reliable step up. Corrosion-resistant. Offroad-ready. The all-steel construction is high-strength for scratch and scuff protection on the trail. Aries rocker step rails provide a dependable step up into your truck, featuring a strong double tubing with a 3-inch wide top plate.
BrandARIES #ad
ManufacturerARIES #ad
Height9.05 Inches
Length75 Inches
Weight58.8 Pounds
Width16 Inches
Part Number2074150
Model2074150
WarrantyLimited Lifetime Warranty (3 Year Finish; One-Year Parts)

9. S.K Vincent

#ad

S.K Vincent Running Boards Rock Sliders Step Bars nerf Bars fits 10-20 Toyota 4 Runner Non-Limited

#ad
S.K Vincent #ad - Simple install:easy bolt-on installation. Fits :2010-2020 toyota 4runner trail edition & 2014-2020 toyota 4runner sr5 & 2017-2020 4runner tRD Off-Road (Not for TRD PRO Models or Models with Lower Rocker Panel Extensions).

Material: 4runner running boards made with premium matted black coated steel and composite End Capsthe Better Metal Treatment Is Not Easy To Fall Off, Preventing Rust And Ultraviolet Rays. Non-slip step plate allows Superior Traction And Stability In Any Weather Condition. No-hassle warranty:Have Any Quality Question,free Return&exchange. 2. 5” the main bar fits tight to the body of the truck, for a Clean, The Lesser Gap Between The Bar And Frame, Integrated Look And Feel.

No drilling or cutting Required. All mounting Hardware And Installation Instruction Included. The instruction is clearly Stamped For Driver/passenger, Front/center/rear Locations Of Brackets. Drop down style:running board for toyota four runners are high quality specifically not universal steps Made For The Sr5 4runner.
BrandS.K Vincent #ad
ManufacturerS.K Vincent #ad
Part NumberBC95195

10. Tyger Auto

#ad

Tyger Auto TG-AM2T20208 Star Armor Kit for 2007-2020 Toyota Tundra CrewMax | Textured Black | Side Step Rails | Nerf Bars | Running Boards

#ad
Tyger Auto #ad - Tyger unique patented star step pads serve a helpful step in and out of the Cab. Dual stage powder coated textured Black finish. Diy instruction included in the package. One-piece design. Completely assembled. Tyger no-hassle 5 year warranty against manufacturing defects. Important: only fit crew ax cab with 4 full-size doors not for double Cab with 2 full-size front doors & 2 narrower rear doors. Please check the Cab size image above. Heavy-duty 2inch diameter tubes. No drilling required. Easy bolt-on installation.
BrandTyger Auto #ad
ManufacturerTyger Auto #ad
Height13.39 Inches
Length91.73 Inches
Weight107 Pounds
Width13.39 Inches
Part NumberTG-AM2T20208
ModelTG-AM2T20208
Warranty5 Year