Top 10 NEIKO 02454A Heavy Duty Aluminum Socket Holder – Socket Wrenches

As an Amazon Associate I earn from qualifying purchases.

1. Neiko

#ad

3/8 and 1/2-Inch Drives, NEIKO 02454A Aluminum Socket Holder and Organizer Set | 3-Piece Set | Lightweight and Heavy-Duty Rails | 1/4

#ad
Neiko #ad - Customizable: these socket organizers come with rubber ends which easily slip off and socket clips that are interchangeable, allowing you to switch multiple sized sockets on each socket rail.

Includes: socket rail organizer set includes 3-pieces with a total of 54 socket clips: 20 1/4-inch Drive, 18 3/8-inch Drive, and 16 1/2-inch Drive. Secure hold: each socket clip includes a spring-loaded ball detent for the most secure hold. Sturdy: aluminum construction provides a lightweight solution to storing sockets. Hangable: open hole slots on both ends allow you to hang rails onto tool boards or pegboards for easy access and visibility.
BrandNeiko #ad
ManufacturerNeiko #ad
Height1.14 Inches
Length12.24 Inches
Weight0.95 Pounds
Width3.15 Inches
Part Number02454A
Model02454A

2. Precision Defined

#ad

Precision Defined Aluminum Tool Socket Holder | Red, Single 1/4-Inch x 16 Clips | Heavy Duty Organizer

#ad
Precision Defined #ad - Simply use precision defined’s aluminum tool socket trays to clean your man cave! Ironclad: built with toughness from the ground up. Fits metric or SAE sockets. With spring loaded ball bearing socket clips, pop and snap your sockets in and out with ease.

Feel the difference to see how durable and professional quality these organizers will last. Versatile in a fitting your exact work area, tradesman and DIY specialist. These tool box socket holders organize and protect your sockets from a jumbled mess and getting lost from job to job. Essential - get the essential organization tool for any mechanic, cabinets and tool chests. Each rail includes hanging holes on either end so you can hang them vertically or horizontally to fit your workspace.

Or simply place them standing upright in your Craftsman tool chest or tool drawer. You will easily lose them in your full array of tools. Even if you try using your sockets, we’ll make sure to get you a replacement or refund so you get your project done right. Fully customizable: each rail is built for versatility. The socket rail storage is built for a long lasting life while keeping your sockets organized. Avoid clutter: no one likes searching for tool sockets in a messy workspace.
BrandPrecision Defined #ad
ManufacturerPrecision Defined #ad

3. ABN

#ad

1/2 Inch Socket Rails and 16 Clips Tool Organizer, 3/8, ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4

#ad
ABN #ad - Stay organized: use the abn black aluminum socket rail tool socket organizer tray sae 3-piece Set - 1/4", 3/8”, 1/2" Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts; This socket set organizer accepts both shallow and deep sockets. Use anywhere: use the 17-inch x 082-inch 43cm x 2cm rails as socket organizers for toolboxes drawer to organize your toolbox, 3/8-inch, or tool drawer organizer as you store it in a drawer; 1-inch x 02-inch 25mm x 5mm keyhole slots to mount on any surface hardware not included; SAE standard 1/4-inch, socket tray as you set it on your workbench, wall socket organizer as you mount on a wall vertically or horizontally, 1/2-inch socket drives.

Package contents: socket storage rail package includes 3 socket organizer black aluminum sockets organizer rails with clips – 1 1/4-inch drive + 1 3/8-inch drive + 1 1/2-inch drive rails and 16 clips per rail 48 total.

Built to last: tool socket holder rail constructed from aluminum with black finish for strength and longevity; Socket clips constructed from heavy-duty plastic; End caps constructed from soft plastic caps removable; Set holds up to 48 sockets 16 sockets per rail. Secure your tools: spring-loaded ball bearings on each clip offer a firm and secure hold; Your sockets attach to plastic clips which are friction fit to the aluminum rail; The clips are held in place by soft plastic end caps that are also friction fit to the rail.
BrandABN #ad
ManufacturerABN #ad
Height1.25 Inches
Length18 Inches
Weight0.9 Pounds
Width3.5 Inches
Part Number2619
WarrantyThis product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

4. Neiko

#ad

Neiko 02448A 1/2" Drive Master Impact Socket Set, 65 Piece Deep & Shallow Socket Assortment | Standard SAE 3/8-Inch to 1-1/4-Inch and Metric 10-24 mm Sizes | Includes Adapters and Ratchet Handle

#ad
Neiko #ad - Sturdy and strong blow molded case features socket size labels for organized storage and is secured by two lever locks. Impact pieces are constructed of heavy-duty drop-forged premium chrome vanadium steel to withstand extreme levels of torque changes against fasteners.

The complete set comes with the following pieces: 58 x 1/2" drive sockets - sae deep and shallow: 3/8, 10-inch, 11, 13, 15/16, 1 x 1/2" f to 3/8" m reducer, 13/16, 1-1/8, 15, metric deep and shallow: 10, 11/16, 7/8, 17, 18, 7/16, 12, 19, 9/16, 24mm; 3 x 1/2" extension bars: 3, 3/4, 5, 1-1/16, 1-1/4", 21, 1 x 1/2" impact universal joint, 1/2, 1, 14, 22, 1 x 1/2" by 10-inch length quick-release ratchet handle 72-tooth, 5/8, 1 x 3/8" F to 1/2" M adapter.

Highly visible laser-etched markings on corrosion-resistant black phosphate finish makes it easy to identify drive socket sizes, specs, and measurements. 6-point hex socket design prevents round-off deterioration under high torque and hammering stress with use of impact and electric wrenches.
BrandNeiko #ad
ManufacturerNeiko #ad
Part Number02448A
Model02448A

5. Neiko

#ad

Chrome Vanadium Steel | 5-Piece Set for Impact Driver Conversions, Neiko 30249A Impact Socket Adapter and Reducer Set

#ad
Neiko #ad - Impact grade: designed Specifically for Impact Drivers & Wrenches. Durable: black Oxide Finish for Maximum Longevity. Secure: spring loaded detent balls keep Your Sockets Secure and Through Holes Allow the Use of Locking Pins & Rings. Universal: 5 piece set includes 2 reducers: 3/8" female x 1/4" male, 3/8" f x 1/2" m, 1/2 inch f x 3/8" M and 3 Adaptors: 1/4" F x 3/8" M, 1/2" F x 3/4" M. Heavy duty: made of drop forged, Heat Treated Chrome Vanadium Steel for Superior Strength.
BrandNeiko #ad
ManufacturerNeiko #ad
Height1 Inches
Length2 Inches
Weight0.62 Pounds
Width3.5 Inches
Part Number3792988
Model30249A

6. ARES

#ad

ARES 60058-6-Pack Set Metric and SAE Magnetic Socket Organizers -Blue and Red -1/4 in, 1/2 in Socket Holders, Holds 143 Pieces of Standard Shallow and Deep Sockets -Organize Your Tool Box, 3/8 in

#ad
ARES #ad - Sockets not included with the holders. *. These organizers can be used with the following socket sizes: 1/8-in, 9/32-in, 7/32-in, 7/8-in, 5/8-in, 3/8-in, 1-in, 1 1/4-in. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. Metric socket organizers: this set includes three blue metric magnetic socket organizers in 1/4-in drive, 22mm, 12mm, 23mm, 14mm, 25mm, 24mm, 3/8-in drive, 10mm, 13mm, 15mm, 5mm, 4.

5mm, 7mm, 21mm, 8mm, 9mm, 5.5mm, 11mm, and 1/2-in drive that allow you to store shallow and deep metric sockets. With your support, we’re proud to help this great organization. If you have any issues with your aRES Magnetic Socket Holders, simply contact customer service for troubleshooting help, parts, replacement, or refund. Design considerations: each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces.

These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can stick them on the side of your tool box. Your sockets aren’t going anywhere! Reliable | effective | efficient: users trust ares to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty.
BrandARES #ad
ManufacturerARES #ad
Height3.74 Inches
Length15.04 Inches
Width7.56 Inches

7. Neiko

#ad

TOOLUXE 03966L Universal Socket Holder Organizer Tray | 80 Piece | 1/4", 3/8" and 1/2" Multi Drive | Nickel Plated Steel Clips

#ad
Neiko #ad - Durable: nickel plated steel clips, rails with a powder coated metal tray provide better durability than similar products made of plastic. Design: specially designed and shaped clips hold sockets tightly with exact tension for secure mounting and easy removing.

Convenience: perfect for mechanic’s for socket set storage putaway in garage and workshop by either hanging on a pegboard hook with included rail handle or putting in a tool box organizer. No more loose includes: 80 pieces of multi-drive clips in 4 rails: 20 clips for 1/4-inch drive sockets, 30 clips for 3/8-inch drive sockets and 30 clips for 1/2-inch drive sockets. Eliminates the time-consuming task of hunting through loose sockets. Size: measures 17-1/2-inches by 6 inches for an easy fit in the work space or tool shop.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height0.75 Inches
Length16.6 Inches
Weight1.95 Pounds
Width6.2 Inches
Part Number03966L
Model03966L

8. Neiko

#ad

NEIKO 02440A 3/8" Drive Impact Socket Set | 44 Piece | Standard SAE 5/16”-3/4” and Metric MM 8 mm-19 mm Sizes | Deep and Shallow Kit | Includes Extension Bars and U-Joint

#ad
Neiko #ad - The included socket set case holds each socket for easy transport and storage. Heavy-duty impact sockets: each socket in this 44-piece master kit is constructed with high-impact drop-forged premium CrV steel. Metric & standard socket set: our universal socket set includes both metric and standard sizes to fit any and all measurements you encounter on the job! This socket kit will fill all your tool needs.

The sturdy and professional chrome vanadium construction allows you to take on any project, large or small. Easy-read socket set: each socket has a highly visible laser-etched marking on a black phosphate finish for easy identification of the socket measurement. It also includes deep metric sizes from 8 mm to 19 mm and standard metric sizes from 8 mm to 19 mm.

This design allows for fast application, efficiency, and accuracy in any work space. Metric & standard socket sizes: this set includes sae deep sizes from 5/16" to 3/4" and SAE standard sizes from 5/16" to 3/4". 6-point hex design: the 6-point hex socket design prevents round off on fasteners under high torque exertion from high-impact or electric wrench output.
BrandNeiko #ad
ManufacturerNeiko #ad
Part Number02440A
Model02440A

9. HORUSDY

#ad

1/4-Inch x 28 Clips, Premium Quality Socket Holders, 3/8-Inch x 28 Clips, HORUSDY 6PC 360° Swivel ABS Socket Organizer, 1/2-Inch x 24 Clips

#ad
HORUSDY #ad - Metric or SAE sockets. It can hold 80 sockets in total. Three different colors make it fast and easy to identify drive sizes, helping you organize your cluttered workspace and toolbox.

Spring loaded ball bearings on each clip hold Sockets Firm And Secure, Fits almost all brands of sockets and removable end cap, add or remove clips easily. Include: 1/4-inch x 28 clips, 3/8-inch x 28 Clips, 1/2-Inch x 24 Clips. Heavy duty molded abs plastic allows For Shallow Or Deep Sockets. A quick and easy way to organize cluttered toolboxes And Work Areas, set it on your workbench, mount on a wall vertically or horizontally, or store it in a drawer.
BrandHORUSDY #ad
ManufacturerHORUSDY #ad
Height1.2 Inches
Length16 Inches
Width5.5 Inches

10. Olsa Tools

#ad

Olsa Tools 3/8-Inch Drive Aluminum Socket Organizer | Professional Quality Socket Holder RED

#ad
Olsa Tools #ad - Spring loaded clips - enjoy your peace of mind knowing that your sockets will be held securely in place. The olsa tools socket organizer is built with durability and long-term use in mind.

Premium socket organizer - the olsa tools 3/8 inch drive socket holder is at the forefront of socket storage innovation. High capacity - this organizer for sockets is equipped with 18 3/8" drive ball bearing clips that will hold and secure your sockets under heavy conditions. Easily organize all your sockets on this easy to use socket rail. Heavy duty - engineered with high grade annodized aluminum rails and impact resistant ABS clips with steel ball bearings. Quick and easy socket organization - Organize your sockets quickly and easily with this hassle-free holder for sockets. The socket clips on these rails are built with spring loaded ball bearings to hold your sockets firmly and securely.
BrandOlsa Tools #ad
ManufacturerOlsa Tools #ad
Height0.88 Inches
Length17 Inches
Weight0.3 Pounds
Width1 Inches
Part Number1011
WarrantyLIFETIME WARRANTY against defect: [email protected]