Top 10 Ford Fan Clutch Removal Tool 36mm – Cooling & Water Pump Tools

As an Amazon Associate I earn from qualifying purchases.

1. ZKTOOL

#ad

Removing Holding Holder Clutch Tool,Water Pump Holder Removal Tool., Chevrolet,Nut Water Hub Removal, ZKTOOL 32mm&36mm Fan Clutch Wrench Set Fit for BMW Ford GM

#ad
ZKTOOL #ad - If you have any questions, please contact us. We will wait 24 hours. Service: zktool has the most perfect warranty service. Quality: this 2-piece fan clutch wrench set is made of high-strength steel, with precise dimensions, and has undergone many actual vehicle tests.

It has passed rigorous engine tests and is fully fitted, which can save you a lot of money. And its price is more affordable and better quality. This is a two-piece multifunctional tool that you will like. Application: 32mm&36mm wrench tool is compatible with bmw m4 m10 m20 m30 m40 m44 m50 m52 m52tu m54 m56 m60 m70 M73 S14 S38 S54 S50B30 S50B32 and newer models, compatible with Ford. Brand new upgrade tool: 32mm & 36mm fan clutch nut wrench tool is more practical than similar tools on the market.

We provide all the necessary information for each product. The rubber handle covered in the middle helps prevent hand fatigue during prolonged use. More extensive design: 32mm&36mm clutch fan removal tool kit, compatible with most models of BMW, compatible with a wider range of models than similar products, Ford and Mercedes-Benz.
BrandZKTOOL #ad
ManufacturerZKTOOL #ad
Height1.1 Inches
Length14.96 Inches
Weight1.87 Pounds
Width2.56 Inches
Part NumberZK056

2. ABN

#ad

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

#ad
ABN #ad - Built to last: constructed from 02-inch 5 mm thick vanadium steel for maximum strength and longevity; 12. 5-inch 31. 8 cm long clutch fan removal tool handles for less user fatigue. Easy to use: attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm both included spanner to undo nut; If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, place wrench on fan clutch nut, remove bolts and reinstall over bar.

Fits your vehicle: made to be compatible with bmw engine models m10, s54; also compatible with some ford, m44, m73, m70, m52tu, m50, gm, m52, m20, s38, m54, m30, m40, s50b32, s50b30, s14, m60, M56, and Chevy models; Bar has 3 13 mm diameter holes and 1 24x12 mm hole plus 1 33x11 mm and 1 38x25 mm half-circle grooves.

Package contents: 32mm and 36mm fan clutch removal tool set includes 2 standard size wrenches 32mm and 36mm spanner sizes and 1 pulley bar. Remove & reinstall automotive fan clutches: the abn 32mm & 36mm fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans; The holder bar keeps the water pump pulley in place while loosening the radiator fan.
BrandABN #ad
ManufacturerABN #ad
Height1 Inches
Length15 Inches
Weight2.69 Pounds
Width2.7 Inches
Part Number5154

3. YHB

#ad

Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit, YHB 32mm & 36mm Fan Clutch Nut Wrench and Water Pump Holder Tool Kit Removal for BMW Fan Clutch Tool Removal kit 3pcs

#ad
YHB #ad - Packing include: x1pc 32mm fan clutch wrench, x1pc 36mm fan clutch wrench, x1pc double-ended water pump fan pulley holder. This fan clutch tool removal kit Designed to easily remove lock nuts on the temperature dependent thermo-viscous fans. Fit: fan clutch removal tool 36mm and 32mm fan clutch tool kit for bmw m10, m52tu, m30, m73, m20, m70, m40, m54, gm, s50b30, m50, S50B32, m56, M52, s14, M60, m44, s38, S54. Also fit some Ford, and Chevy models. Wrench thick:6mm/023”, wrench long:37. 5mm/14. 8”. Holder thick:5mm/02”, holder long:38mm/15”. Material: steel.
BrandYHB #ad
ManufacturerYHB #ad
Part NumberYHBOT00404

4. ATPEAM

#ad

ATPEAM 32mm & 36mm Fan Clutch Nut Wrench | Water Pump Fan Clutch Automotive Fan Clutch Removal Tool Compatible for BMW 32mm Wrench 36mm Wrench

#ad
ATPEAM #ad - There is a layer of rubber in the middle part, rust-proof and does not hurt your hands. Wide application: the fan clutch removal tool kit is compatible with bmw engine models m10, m50, s14, m70, m40, m73, m30, m44, S38, M54, M56, s54, M20, S50B32, S50B30, gm, also compatible with some Ford, M52, m52tu, M60, and Chevy models.

Automotive fan clutches: the atpeam 32mm & 36mm fan clutch wrench removes lock nuts on temperature-dependent thermo-viscous fans, one wrench with two size make the work easier. Durable material: this 32mm & 36mm fan clutch removal tool is constructed from premium high strength steel, which has strong hardness and not easy to be broken or bent.

Easy to use: place the wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm both included spanner to undo nut. Package included: 1 x 32mm and 36mm fan clutch removal tool, one wrench with two size 32mm & 36mm.
BrandATPEAM #ad
ManufacturerATPEAM #ad
Height7 Inches
Length11 Inches
Width3 Inches
Part NumberAE-18-48

5. ALPHA MOTO

#ad

ALPHA MOTO Pneumatic Fan Clutch Wrench Set Removal Auto Mechanic Tool Kit Fits for Ford, GM, 40mm Thin and New 47mm Wrenches etc, 36mm, Chrysler and Jeep Removing Stuck Fan Clutches Includes 32mm

#ad
ALPHA MOTO #ad - No need to hold wrenches manually. 1-7/8"and 2" are also included. The air tool allows the user to get the job much faster and easier than conventional fan clutch wrenches. Improved design: only when a certain position is aligned between the wrench and handle assembly will allow the handle assembly and wrench separate from each other.

Includes:wrenches 7/8", 32mm, 36mm, 40mm thin and 47mm size to fit Ford 6.00l and 6. 4l powerstroke diesel pickup. This tool set can easily removes and installs water pump and fan clutch, GM, will work for 4. 3l, or sUV. Effortless: air compressor and air chisel or hammer is required for this tool to work.

Application: will work for ford, mini-van, 5. 0l, or 5. 7l gm pick up van, Chrysler and Jeep. Your satisfaction is our goal: we are confident that this tool is the most cost-effective one to get your job done, just contact us, if you are not 100% satisfied, we will work the issue out with you until you are 100% satisfied.
BrandALPHA MOTO #ad
ManufacturerALPHA MOTO #ad
Height2.6 Inches
Length14.5 Inches
Width9.5 Inches
Part NumberRMI-TO-818

6. GearWrench

#ad

GEARWRENCH Fan Clutch Service Set |Fan Nut Wrenches|Pully Holder|Blow Mold Case|, 41580D

#ad
GearWrench #ad - Features the patented universal PULLEY holder. Durable blow mold case for tool retention. Gearwrench's fan clutch Service Set covers most vehicles with bolt on pulleys. Fan nut wrenches included: 22mm, 50mm, 40mm, 36mm, & diesel. Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing.
BrandGearWrench #ad
ManufacturerGEARWRENCH #ad
Height3.9 Inches
Length23.1 Inches
Weight2.89 Pounds
Width9.1 Inches
Part Number41580D
Model41580D
WarrantyStandard Limited Lifetime

7. Mekar

#ad

Mekar 43300 Pneumatic Fan Clutch Wrench Set Clutch Removal Tool Kit Compatible with Jeep, Ford, GM,Chrysler

#ad
Mekar #ad - Package included: 7*wrenches + 1*storage bag. Fitment: compatible with ford, chrysler and jeep vehicles Kindly note: please make sure the size you need before purchase. Product quality has been upgraded, GM, please rest assured to buy.

High quality material: made of 1/4" thick steel, durable and high strength, Corrosion and rust resistance. Support one-year warranty and return service. Including return and refund service. Function: when servicing the water pump or fan clutch, our special tool can easily remove and install the fan clutch. Guarantee: any problem about the product, please feel free to contact us.

7 driving wrenches sizes: 7/8", 1-7/8" and 2" the slim new 47mm wrench tool is suitable for Ford 6. 0l and 6. 4l powerstroke diesel pickup trucks, comes with a Storage bag, 32mm, 36mm, 40mm, 47mm, which is easy to store and carry. Support one-year warranty. You can install it around the clutch and release the clutch by quickly pulling the trigger, and finally releasing it Kindly noted: use with an air hammer.
BrandMekar #ad
ManufacturerMekar #ad
Part NumberMekar-1

8. Powerbuilt

#ad

Powerbuilt 647074 Ford Fan Clutch Wrench Set

#ad
Powerbuilt #ad - Easy access to fan clutch nut On: 1984 Thru 1993-Ford. Includes: ford Fan Clutch Wrench Set. Each tool includes 1/2" square Drive Hole For Use With Breaker Bar. Removes threaded-on viscous fan clutches. Allows easy access to fan clutch nut. 1/2 inch square drive slot for use with ratchet or breaker bar.
BrandPowerbuilt #ad
ManufacturerAll Trade Tools #ad
Height0.5 Inches
Length20.5 Inches
Weight2.2 Pounds
Width5.38 Inches
Part Number647074
Model647074

9. LOSTAR

#ad

LOSTAR 3pc 36mm + 32mm BMW Fan Clutch Nut Wrench & Clutch Holder Removal Tool Kit

#ad
LOSTAR #ad - Include: 1 pc -32mm wrench; 1 pc -36mm Wrench; 1 Pc - Fan Clutch Holder. 1 year unlimited-mileage Quality Guarantee. Sizes: 36mm, 32mm. 5. Features: 1. Premium quality, Direct Fit, 2 Days Delivery. 2. Color: Silver. For removing water pump on models with temperature dependent viscosity drive fans. 4. Application make: mercedes, other. For removing lock nuts on the thermo-Viscous fans found on Ford, Mercedes many vehicles. 3. High Reliability. Enhance performance. Easy Installation.
BrandLOSTAR #ad
ManufacturerLOSTAR #ad
Part NumberLSOT00404

10. DXGTOZA

#ad

43300 Pneumatic Fan Clutch Wrench Set Spanner Removal Tool Kit for GM, Jeep, Chrysler, Ford

#ad
DXGTOZA #ad - Fitmentthis 43300 pneumatic fan clutch wrench fit for ford, 5. 0l, gm, chrysler and Jeep and compatible with 4. 3l, 5. 7l gm pick up. No holding wrench is necessary. Easy to usedquickly removes and installs fan clutch when repairing the water pump or fan clutch.

Package includedfan clutch removal tool kit includes 7 driving wrenches. Faster and easier than conventional fan clutch tool. Anti-rust treatmentfan clutch kit made out of 1/4" thick steel, Resisting rust and corrosion, Black finish, ensuring long life. After-sale warranty wrenches used with air hammer (without), includes blow molded storage case.

We provide a one-year warranty service for the spanner wrench tool, if you have any questions, please feel free to contact us. Wrench sizes include 7/8 '', 36mm, 40mm, thin and new 47mm to fit Ford 6.0l and 6. 4l power stroke diesel pickup, 32mm, 1-7/8 '' and 2 '' are still included in the set.
BrandDXGTOZA #ad
ManufacturerDXGTOZA #ad
Part Number43300 Fan Clutch Wrench
Warranty24 Months