Top 10 Fan Clutch Wrench Set – Automotive Replacement Complete Clutch Sets

As an Amazon Associate I earn from qualifying purchases.

1. GearWrench

#ad

41580D, GEARWRENCH Fan Clutch Service Set

#ad
GearWrench #ad - Covers most vehicles with bolt on pulleys. Fan nut wrenches included: 22mm, 36mm, 50mm, 40mm, & diesel. Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing. Features the patented universal PULLEY holder. Durable blow mold case for tool retention.
BrandGearWrench #ad
ManufacturerKD Tools #ad
Height3.9 Inches
Length23.1 Inches
Weight2.89 Pounds
Width9.1 Inches
Part Number41580D
Model41580D
WarrantyStandard Limited Lifetime

2. Lisle

#ad

Lisle 43300 Pneumatic Fan Clutch Wrench

#ad
Lisle #ad - No holding wrench is necessary. Use with an air hammer. 1-7/8"and 2" are still included in the set. 4l power stroke diesel pickup. Includes blow molded storage case. Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Set includes 7 driving wrenches that fit ford, 36mm, 32mm, gm, chrysler & jeep. Set now includes 7/8", 40mm thin and new 47mm size to fit Ford 6. 0l and 6. 1-1/2" 41mm and 42mm are still available individually. Faster and easier than conventional fan clutch wrenches.
BrandLisle #ad
ManufacturerLisle #ad
Height3.3 Inches
Length7.8 Inches
Weight8.12 Pounds
Width18.9 Inches
Part Number43300
Model43300
WarrantyLimited Lifetime - No Abuse

3. BETOOLL

#ad

BETOOLL 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit For BMW E34 E39 E36 E46 E90

#ad
BETOOLL #ad - Fan clutch holder allows the technician to hold the water pump pulley in place while loosening the radiator fan. Suit for:m4, m50, m70, m30, m52, s38, m56, m73, m54, s14, m44, s54, m60, m10, m52tu, m40, s50b30, m20, s50B32. For the purpose to remove water pump on models with temperature dependent viscosity drive fans. Size: 32mm 1. 26". Fan clutch wrench removes lock nuts on the thermo-Viscous fans.
BrandBETOOLL #ad
ManufacturerBETOOLL #ad
Weight1.61 Pounds
Part NumberB017VLLQ6M
Model13

4. DXGTOZA

#ad

43300 Pneumatic Fan Clutch Wrench Set Spanner Removal Tool Kit for GM, Jeep, Chrysler, Ford

#ad
DXGTOZA #ad - Easy to usedquickly removes and installs fan clutch when repairing the water pump or fan clutch. Tipsused with air hammer (without), includes blow molded storage case.

High quality materialmade out of 1/4" thick steel, Black finish, Resisting rust and corrosion, ensuring long life. Package includedpneumatic fan clutch installer/remover set include 7 driving wrenches. Fitmentthis 43300 pneumatic fan clutch wrench set fit for Ford, GM, Chrysler and Jeep. No holding wrench is necessary. Faster and easier than conventional fan clutch wrenches. Wrench sizes include 7/8 in, 36mm, 32mm, thin and new 47mm to fit Ford 6.0l and 6. 4l power stroke diesel pickup, 40mm, 1-7/8 in and 2 in are still included in the set.
BrandDXGTOZA #ad
ManufacturerDXGTOZA #ad
Part Number43300 Fan Clutch Wrench

5. ABN

#ad

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

#ad
ABN #ad - Easy to use: attach the pulley holder bar with your bolts inserted through the holes, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm both included spanner to undo nut; If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, lock into place on water pump face, remove bolts and reinstall over bar.

Built to last: constructed from 02-inch 5 mm thick vanadium steel for maximum strength and longevity; 12. 5-inch 31. 8 cm long clutch fan removal tool handles for less user fatigue. Remove & reinstall automotive fan clutches: the abn 32mm & 36mm fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans; The holder bar keeps the water pump pulley in place while loosening the radiator fan.

Fits your vehicle: made to be compatible with bmw engine models m10, m50, m30, m54, m56, s50b30, m44, s54; also compatible with some ford, m20, gm, S38, m60, s50b32, m73, m40, s14, m52tu, M52, M70, and Chevy models; Bar has 3 13 mm diameter holes and 1 24x12 mm hole plus 1 33x11 mm and 1 38x25 mm half-circle grooves. Package contents: 32mm and 36mm fan clutch removal tool set includes 2 standard size wrenches 32mm and 36mm spanner sizes and 1 pulley bar.
BrandABN #ad
ManufacturerABN #ad
Height1 Inches
Length15 Inches
Weight2.69 Pounds
Width2.7 Inches
Part Number5154

6. 8MILELAKE

#ad

8MILELAKE Fan Clutch Wrench Set 10pc Clutch Remover Installer Kit

#ad
8MILELAKE #ad - Fit into close quarters where conventional wrenches just won't get the job done. Blow molded case for easy storage and transport. Heat treated to with stand high torque needed to remove some fan clutches. Removing fan clutches to replace Water pumps or for other engine service doesn't have to be a headache. A must for any front engine service.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height0.98 Inches
Length3.35 Inches
Width2.56 Inches
Part NumberD00781

7. EUICAE

#ad

Spanner Wrench Clutch Wrench Adjustable Wrench Holder Hub Flywheel Sprocket Spanner Wrench Set Fan Clutch Removal Tool Tools Scooter Motorcycle Accessories Type A

#ad
EUICAE #ad - If you are not satisfied with your purchase for any reason, EURICA is pleased to refund you. Dimension: length: 11. 8in 30cm. Package includes: 1 spanner Wrench with 2 detachable pins which have been already built-in.

Arms opening Width: 06in-4. 7in 1. 5cm-12cm. Wide applications: adjustable screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots. We stand confidently behind our products with our satisfaction guarantee! Quality and satisfaction guarantee: every piece of product has been carefully checked before packaging. Material & manufacturing: our spanner wrench is made of high quality iron, fine workmanship and in reliable quality, which is not easy to bend. With good manufacturing, it is durable and strong.
BrandEUICAE #ad
ManufacturerEUICAE #ad
Height1.18 Inches
Length10.63 Inches
Width3.54 Inches
Part NumberA0010
ModelA0010

8. Autocraft

#ad

Autocraft Fan Clutch Wrench Set

#ad
Autocraft #ad - Each tool includes 1/2" square drive hole for use with breaker bar for more torque. 1988 to current 2. 9 liter to 3. 0 liter engines. 2. 8 liter engines. Ford fan clutch wrench seteasy access to fan clutch nut on 1984 to 1993 ford 4. 9 liter e and f series truck engines. Check service manual for torque specifications and thread direction. 1990 to current 4. 0 liter engines. 1984 to 1987 ford 4. 6 liter modular engines. Wrench sizes: 36mm and 57mm.
BrandAutocraft #ad
ManufacturerAutocraft #ad

9. Sunluway

#ad

Fan Clutch Removal Tool Kit Fits for Ford GM Jeep Chrysler, 43300 Pneumatic Fan Clutch Wrench Set

#ad
Sunluway #ad - 7 driving wrenches sizes: 7/8", 36mm, come with a store bag, 40mm, 47mm, 1-7/8" and 2" thin and new 47mm wrench tool fits Ford 6.0l and 6. 4l powerstroke diesel Pickup, 32mm, easy to keep and carry.

100% satisfaction guarantee: we are serious to offer the best products and services to customers. Compatibility: fits for ford, GM, Chrysler and Jeep vehicles please kindly make sure the size you need before purchase. Easy to use: our specialty tool helps easily remove and install fan clutch when repairing the water pump or fan clutch, it fits around the clutch and the clutch will loose with a quick pull of the trigger, and then you can spin it off Use with an air hammer.

Premium support & 12 Months Warranty. Superior quality: constructed from 1/4" thick steel, this tool set ensures high strength and durability, great resistance to corrosion and rust. If you're not 100% satisfied with Sunluway Tool Set, simply return it for a full refund in 30 days.
BrandSunluway #ad
ManufacturerSunluway #ad
Part NumberSY0127

10. Bestong

#ad

Bestong 43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Compatible for Ford GM Chrysler Jeep

#ad
Bestong #ad - Use with an air hammer. No holding wrenches necessary. Convenient and Saving your time and energy. Compatible for ford, gm, Chrysler and Jeep vehicles please make sure the size you need before purchase.

Our specialty tool helps easily remove and install fan clutch when repairing the water pump or fan clutch, it fits around the clutch and the clutch will loose with a quick pull of the trigger, and then you can spin it off Use with an air hammer. Quickly removes and installs fan clutch when repairing the water pump or fan clutch. 7 driving wrenches sizes: 7/8", come with a store bag, 47mm, 32mm, 1-7/8" and 2" thin and new 47mm wrench tool fits Ford 6.0l and 6. 4l powerstroke diesel pickup, 36mm, 40mm, easy to keep and carry. Does the job much faster and easier than conventional fan clutch wrenches.
BrandBestong #ad
ManufacturerTongbest #ad
Part NumberTong-56852