As an Amazon Associate I earn from qualifying purchases.
DV8 Offroad #ad - Solid foundation: manufactured from precision cut and molded stamped steel for a sturdy, lightweight replacement hood. Recommendation: it is recommended for professional installation including prep, fitting, seam sealer and painting for ultimate fitment. Cool under pressure: designed with vented heat dispersion technology that promotes high-flow air circulation in the engine compartment to assist better engine cooling on trails and highways.
Installtion: unit includes under hood insulation and all required hardware is included. Directions are available from the manufacture website for download.
Appearance: even though designed for efficiency, the aesthetics of the hood will give your JL or JT an aggressive new look over that plain factory hood. Always test fit prior to painting. Advance technology: vented gaps allow increased airflow into the engine bay thus pushing out heat in the engine bay and away from the engine.
DV8 Offroad #ad - Solid foundation: manufactured from precision cut and molded stamped steel for a sturdy, lightweight replacement hood and is coated with a rust inhibitor E-coating and is ready for pre-paint prep.
Fitment: compatible with 2018-current Jeep Wrangler JL and 2020-Current Jeep Gladiator JT. Cool under pressure: designed with vented heat dispersion technology that promotes high-flow air circulation in the engine compartment to assist better engine cooling on trails and highways.
Smittybilt #ad - Extra engine clearance for V8 swaps with up to 4" of clearance. Accepts factory hardware. Side vents pop out for personal customization. 2mm black finish e-coat that's ready for paint. Thick underbody insulation mat. Significantly improves cooling and heat dissipation. 0 Hood nozzles included.
DV8 Offroad #ad - Directions are available from the manufacture website for download. Function: vented gaps allow increased airflow into the engine bay thus pushing out heat in the engine bay and away from the engine. Recommendation: it is recommended for professional installation including prep, fitting, seam sealer and painting for ultimate fitment.
Pre-prep finish: produced from the factory coated with a rust inhibitor E-coating and is ready for pre-paint prep. Fitment: compatible with 2018-2021 jeep wrangler JL and 2020-2021 Jeep Gladiator JT. Installtion: unit includes under hood insulation and all required hardware is included.
Solid foundation: manufactured from precision cut and molded stamped steel for a sturdy, lightweight replacement hood. Appearance: even though designed for efficiency, the aesthetics of the hood will give your JL or JT an aggressive new look over that plain factory hood. Prep work required: these replacement hoods are molded to the specifications of the Wrangler JL and Gladiator JT, however due to tolerances there may be a requirement for adjustments including shaping and dent corrections to make them fit properly prior to paint.
DV8 Offroad #ad - Function: vented gaps allow increased airflow into the engine bay thus pushing out heat in the engine bay and away from the engine. All hoods should be test fit prior to any alterations, as altered hoods are not acceptable for return.
Solid foundation: manufactured from precision cut and machine bent stamped steel for a sturdy, lightweight replacement hood that is designed to replicate the 10th Anniversary Rubicon hood.
DV8 Offroad #ad - Fitment: compatible with 2018-2021 jeep wrangler JL and 2020-2021 Jeep Gladiator JT factory or aftermarket hoods. Installation simple no drill installation, simply remove the existing factory latches and replace with new unit and hardware.
Easily operated: quick release pin easily slides out at the turn of the key, but is tethered to the hold down with a stainless steel lanyard so as to not be misplaced.
DV8 Offroad #ad - Easily operated: quick release pin easily slides out at the turn of the key, but is tethered to the hold down with a stainless steel lanyard so as to not be misplaced.
Installation simple no drill installation, simply remove the existing factory latches and replace with new unit and hardware. Fitment: compatible with 2007-2018 Jeep Wrangler JK factory or aftermarket hood.
DV8 Offroad #ad - Easily operated: quick release pin easily slides out at the press of button, but is tethered to the hold down with a stainless steel lanyard so as to not be misplaced. Fitment: compatible with 2007-2018 Jeep Wrangler JK. Design: 2 stainless steel heim joints connected in the middle with an adjustable billet aluminum turnbuckle and quick release pin on the top.
Z8 #ad - Add unique personality to your It sets your vehicle apart from the rest. Functional heat extractor cooling Hood With Rain Cover Panel and 2 Functional Heat Extract Vents Bezels. It requires painting to match the color of your car even if your car Is black.
Direct bolt-on factory Hinge. Application. Maximize your car performance on and off road by improving heat management. This jk hood features extra large vents to help heat escape quickly and maintain optimum operating temperatures in your engine compartment.
The hood comes with black primer electrophoretic coating. Easy to install. The hood is designed compatible With JK and JK Unlimited models2007-2018. Use factory Latch. Superior ventilation. No drilling required. Aftermarket made special edition revenge hood panel for 2007-2017 JK & Unlimited 2/4 Door. These vents are easily removed for precision painting to create a factory look.
DV8 Offroad #ad - Install: installs in the factory position. Additional protection: integrated upper bull bar offers protection to the lower grill without sacrificing airflow and space to mount a 20" LED light bar. Website. Design: stubby profile grille width front bumper with aggressive end angles allowing maximum wheel travel for the trails without reducing protection for your rig.
Lighting options : opening for 4" for lights and recessed opening for 20" LED light bar lights not included. Fitment: compatible with 2007-2018 jeep wrangler jk as well as 2018-2022 Wrangler JL and 2020-2022 Gladiator JT with additional ABJL-01 bracket kit not included.
Towing points: robotically welded recovery points with galvanized steel D-rings included. Construction: manufactured from steel that is precision cut, machine bent, and robotically welded for strength and durability with strategic high stress zones reinforced with gusseted steel providing additional protection and rigidity. If installing on a wrangler jl or Gladiator JT you will need the additional ABJL-01 not Included. Winch.
1. DV8 Offroad
#adDV8 Offroad | HDMB07-02 | Heat Dispersion Hood fits 2007-2018 Wrangler JK | Raised and Vented Center Cowl | Side Vents | Increased Airflow | Steel Construction
#adInstalltion: unit includes under hood insulation and all required hardware is included. Directions are available from the manufacture website for download.
More information #ad
Fitment: compatible with 2007-2018 Jeep Wrangler JK. Pre-prep finish: produced from the factory coated with a rust inhibitor E-coating and is ready for pre-paint prep. Prep work required: these replacement hoods are molded to the specifications of the Wrangler JK, however due to tolerances there may be a requirement for adjustments including shaping and dent corrections to make them fit properly prior to paint. Appearance: even though designed for efficiency, the aesthetics of the hood will give your JL or JT an aggressive new look over that plain factory hood. Always test fit prior to painting. Advance technology: vented gaps allow increased airflow into the engine bay thus pushing out heat in the engine bay and away from the engine.
| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Height | 10 Inches |
| Length | 60 Inches |
| Weight | 35 Pounds |
| Width | 42 Inches |
| Part Number | HDMB07-02 |
| Model | HDMB07-02 |
| Warranty | Manufacturer Warranty |
More information #ad
2. DV8 Offroad
#adDV8 Offroad | HDMBJL-01 | Heat Dispersion Hood fits 2018-Current Wrangler JL and 2020-Current Gladiator JT | Raised and Vented Center Cowl | Side Vents | Increased Airflow | Steel Construction
#adFitment: compatible with 2018-current Jeep Wrangler JL and 2020-Current Jeep Gladiator JT. Cool under pressure: designed with vented heat dispersion technology that promotes high-flow air circulation in the engine compartment to assist better engine cooling on trails and highways.
More information #ad
Prep work required: these replacement hoods are molded to the specifications of the Wrangler JL and Gladiator JT, however due to tolerances there may be a requirement for adjustments including shaping and dent corrections to make them fit properly prior to paint. Function: vented gaps allow increased airflow into the engine bay thus pushing out heat in the engine bay and away from the engine.| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Height | 11 Inches |
| Length | 62 Inches |
| Weight | 71 Pounds |
| Width | 44 Inches |
| Part Number | HDMBJL-01 |
| Model | HDMBJL-01 |
More information #ad
3. Smittybilt
#adSmittybilt 76500 H.E.M.I. VENTED HOOD for 2007-2018+ Jeep Wrangler JK
#adMore information #ad
| Brand | Smittybilt #ad |
| Manufacturer | Smittybilt #ad |
| Height | 14 Inches |
| Length | 64 Inches |
| Weight | 47 Pounds |
| Width | 46 Inches |
| Part Number | 76500 |
| Model | 76500 |
More information #ad
4. DV8 Offroad
#adDV8 Offroad | HDMBJL-TA | Hood fits 2018-Current Wrangler JL and 20-Current Gladiator JT | Rubicon Replica Design | Steel Construction | Vented Center | Increased Airflow
#adPre-prep finish: produced from the factory coated with a rust inhibitor E-coating and is ready for pre-paint prep. Fitment: compatible with 2018-2021 jeep wrangler JL and 2020-2021 Jeep Gladiator JT. Installtion: unit includes under hood insulation and all required hardware is included.
More information #ad
Cool under pressure: designed with vented heat dispersion technology that promotes high-flow air circulation in the engine compartment to assist better engine cooling on trails and highways. Always test fit prior to painting. Solid foundation: manufactured from precision cut and molded stamped steel for a sturdy, lightweight replacement hood. Appearance: even though designed for efficiency, the aesthetics of the hood will give your JL or JT an aggressive new look over that plain factory hood. Prep work required: these replacement hoods are molded to the specifications of the Wrangler JL and Gladiator JT, however due to tolerances there may be a requirement for adjustments including shaping and dent corrections to make them fit properly prior to paint.
| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Height | 10 Inches |
| Length | 60 Inches |
| Width | 42 Inches |
| Part Number | HDMBJL-TA |
| Model | HDMBJL-TA |
More information #ad
5. DV8 Offroad
#adDV8 Offroad | HDMB07-TA | Hood fits 2007-2018 Wrangler JK | 10th Anniversary Replica Design | Steel Construction | Vented Center Cowl | Increased Airflow |
#adSolid foundation: manufactured from precision cut and machine bent stamped steel for a sturdy, lightweight replacement hood that is designed to replicate the 10th Anniversary Rubicon hood.
More information #ad
Fitment: compatible with 2007-2018 Jeep Wrangler JK. Pre-prep finish: produced from the factory coated with a rust inhibitor E-coating and is ready for pre-paint prep and includes a new under hood insulation kit. Prep work required: each unit must be prepared for paint with shaping and dent corrections for as proper fitment due to different tolerances between vehicles.| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Height | 10 Inches |
| Length | 60 Inches |
| Width | 42 Inches |
| Part Number | HDMB07-TA |
| Model | HDMB07-TA |
| Warranty | Manufacturer Warranty |
More information #ad
6. DV8 Offroad
#adDV8 Offroad | D-JL-190001-LK | Hood Hold Down Set for 18-22 Wrangler JL & 20-22 Gladiator JT | Locking | Quick Release Pin & Adjustable Turnbuckle | Stainless Steel & Billet Aluminum Construction
#adEasily operated: quick release pin easily slides out at the turn of the key, but is tethered to the hold down with a stainless steel lanyard so as to not be misplaced.
More information #ad
Design: 2 stainless steel heim joints connected in the middle with an adjustable billet aluminum turnbuckle and locking quick release pin on the top. Function: with the adjustability of the patented turnbuckle you're able fine tune the tightness and eliminate the hood flutter that can occur while driving down the highways at high speeds.| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Height | 5 Inches |
| Length | 10 Inches |
| Width | 5 Inches |
| Part Number | D-JL-190001-LK |
More information #ad
7. DV8 Offroad
#adDV8 Offroad |D-JP-190001-LK | Locking Hood Hold Down for 07-18 Wrangler JK | Quick Release Pin | Adjustable Tensioning Turnbuckle | Stainless Steel and Billet Aluminum Construction
#adInstallation simple no drill installation, simply remove the existing factory latches and replace with new unit and hardware. Fitment: compatible with 2007-2018 Jeep Wrangler JK factory or aftermarket hood.
More information #ad
Function: with the adjustability of the patented turnbuckle you're able fine tune the tightness and eliminate the hood flutter that can occur while driving down the highways at high speeds. Design: 2 stainless steel heim joints connected in the middle with an adjustable billet aluminum turnbuckle and locking quick release pin on the top.| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Height | 2 Inches |
| Length | 13 Inches |
| Width | 8 Inches |
| Part Number | D-JP-190001-LK |
| Model | D-JP-190001-LK |
More information #ad
8. DV8 Offroad
#adDV8 Offroad | D-JP-190001-K | Hood Hold Down for 07-18 Wrangler JK | Quick Release | Non Locking | Adjustable Tensioning Turnbuckle | Stainless Steel and Billet Aluminum Construction
#adMore information #ad
Safety: with the adjustability of the patented turnbuckle you're able fine tune the tightness and eliminate the hood flutter. Function: to secure the hood to the fenders to keep the hood closed while the vehicle is in motion.| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Height | 1.75 Inches |
| Length | 12.75 Inches |
| Weight | 1.4 Pounds |
| Width | 8 Inches |
| Part Number | D-JP-190001-K |
| Model | D-JP-190001-K |
More information #ad
9. Z8
#adZ8 Compatible With The Avenger Style Replacement Hood Heat Dispersion Compatible With JK JKU Unlimited Rubicon2007-2018, Black
#adDirect bolt-on factory Hinge. Application. Maximize your car performance on and off road by improving heat management. This jk hood features extra large vents to help heat escape quickly and maintain optimum operating temperatures in your engine compartment.
More information #ad
Steel alloy construction: e-coated finish for rust resistant Both Top and Bottom Side. The hood comes with black primer electrophoretic coating. Easy to install. The hood is designed compatible With JK and JK Unlimited models2007-2018. Use factory Latch. Superior ventilation. No drilling required. Aftermarket made special edition revenge hood panel for 2007-2017 JK & Unlimited 2/4 Door. These vents are easily removed for precision painting to create a factory look.
| Brand | Z8 #ad |
| Manufacturer | Z8 #ad |
| Part Number | XS13081-0702 |
| Model | XS13081-0702 |
| Warranty | 90 days |
More information #ad
10. DV8 Offroad
#adDV8 Offroad | FBSHTB-25 | Front Bumper fits 2007-2018 Jeep Wrangler JK | Stubby Profile | Winch Mount Included | Integrated Bull Bar | ABJL-01 Compliant for Wrangler JL and Gladiator JT
#adLighting options : opening for 4" for lights and recessed opening for 20" LED light bar lights not included. Fitment: compatible with 2007-2018 jeep wrangler jk as well as 2018-2022 Wrangler JL and 2020-2022 Gladiator JT with additional ABJL-01 bracket kit not included.
More information #ad
Instructions may be downloaded from the mfg. Recovery: a recessed winch mount capable of mounting a 12K lbs. Everlasting beauty: protected in a multi-stage textured powder coat with corrosion and UV protection additives, can be left as is or sanded down and painted to match. Towing points: robotically welded recovery points with galvanized steel D-rings included. Construction: manufactured from steel that is precision cut, machine bent, and robotically welded for strength and durability with strategic high stress zones reinforced with gusseted steel providing additional protection and rigidity. If installing on a wrangler jl or Gladiator JT you will need the additional ABJL-01 not Included. Winch.
| Brand | DV8 Offroad #ad |
| Manufacturer | DV8 Offroad #ad |
| Height | 51 Inches |
| Length | 51 Inches |
| Weight | 100 Pounds |
| Width | 21 Inches |
| Part Number | FBSHTB-25 |
| Model | FBSHTB-25 |
| Warranty | Manufacturer Warranty |
More information #ad
