Top 10 Crankshaft Seal Tool – Tool Sets

As an Amazon Associate I earn from qualifying purchases.

1. Private Brand Tools

#ad

Private Brand Tools PBT70960 Crankshaft and Camshaft Seal Tool Kit

#ad
Private Brand Tools #ad - Interchangeable sleeves and mandrels allow easy installation of new seal. Suits seal sizes 21. 5mm - 64mm. Compact puller with unique extracting hooks engage seal for quick removal. Easily remove and install crankshaft and camshaft seals without damage.
BrandPrivate Brand Tools #ad
ManufacturerPRIVATE BRAND TOOLS #ad
Height3 Inches
Length13 Inches
Weight4 Pounds
Width12 Inches
Part NumberPBT70960
ModelPBT70960

2. WINTOOLS

#ad

21PCS Crank Bearing Camshaft Seal Remover and Installer Kit Auto Repair Tool Crankshaft Oil Seal Tool

#ad
WINTOOLS #ad - Use the existing bolt in the vehicle for installation. Screw-type adapter to fit the centering. Don't worry about scraping the crank surface. Do not attempt to use this tool by force. Universal use for a wide range of cars with oil seals between 27mm and 58mm in diameter. Allows the crank seal to be replaced without dismantling the crank case which can save your time and costs. Note: some cam seals have screws to prevent remove.
BrandWINTOOLS #ad
ManufacturerWINTOOLS #ad
Height2.76 Inches
Length18.5 Inches
Width8.66 Inches
Part NumberWT04A1021

3. FIRSTINFO TOOLS FIT YOUR NEEDS

#ad

FIRSTINFO Crankshaft Camshaft Seal Remover Separator Puller with 2 Pairs of Hooks 4.6 Inch Long x 2 + 2.87 Inch Long x 2 Set

#ad
FIRSTINFO TOOLS FIT YOUR NEEDS #ad - For universal use removing of oil seals -- Wide range of cars with oil seals between 27~80 mm 1~3. 1 inch in diameter. The reason why the design of the thickness is thin is that easy to fit the crank seal.

Without dismantling the Crankshaft Case -- Allows the crankshaft seal to be replaced without the dismantling. The strength must be "Average" when applying. 2 pairs of hooks -- crankshaft camshaft seal remover puller set comes with 2 pieces of 118mm 4. 6 inch long hooks and 2 pieces of 73mm 2. 87 inch short hooks. Well design for easily fitting the crank seal -- do not apply too much strength when using. Do not apply too much strength when using. Professional auto Repair Tool -- For crankshaft camshaft seal removal.
BrandFIRSTINFO TOOLS FIT YOUR NEEDS #ad
ManufacturerFIRSTINFO TOOLS #ad
Height3.94 Inches
Length5.12 Inches
Weight0.53 Pounds
Width0.79 Inches
Part NumberF3281C
ModelF3281C
Warranty1. Returns accepted for this item. 2. All returns must include all original items, original packaging, undamaged, unused and in re-saleable condition. 3. Additional return policy details: item must be returned within 14 days after the buyer receives it. (the buyer is responsible for return shipping costs. ) 4. Shipping freight charge is non-refundable. Buyers need to be charged for the initial and returned shipping fee if the item is for free shipping. 5. Refund will be given after receiving all return goods.

4. Bonbo

#ad

5046 Crankshaft Wear Sleeve Install Tool & 1338 Front Cover Crankshaft Seal Installation Tool Fits for Cummins 3.9L 5.9L 6.7L Engines

#ad
Bonbo #ad - Function5046 crankshaft wear sleeve install tool is used for installing the front crankshaft wear sleeve. Our focus on products and customer services is 2nd to none. Package includes 1 x front cover crankshaft seal installation tool & 1 x 5046 crankshaft Wear Sleeve Install Tool.

If you're not 100% satisfied with this combination kit, simply return it for a full refund in 30 days. Materialare made from quality steel with black oxide coating, corrosion resistance, high strength, anti-wear, sturdy and durable. Applicationsuitable for 1989-2016 cummins 4bt 3.

9l, b series 5. 9l, isb 5. 9l 6. 7l, qsb 5. 9l 6. 7l and paccar PX-6. Notethis tool combination kit is required for installing factory seal #3937111, #3904353 and the seal found in kit #38028201338 front cover crankshaft seal install Tool is used to properly install the crankshaft seal, avoiding any leak due uneven placement and making the job done right and in order.
BrandBonbo #ad
ManufacturerBonbo #ad
Part NumberB-1388-5046

5. Mekar

#ad

Front Cover Crankshaft Seal Installer Installation Tools Campatible with 1989-Current Cummins 3.9L 5.9L 6.7L Replaces 3824498 1338

#ad
Mekar #ad - High-quality materials – made of top-quality wear-resistance steel, durable and anti-corrosion, repeatedly tested and optimized to ensure its excellent performance and a long service life. Package include - 1*front cover crankshaft seal installation tool.

If the item has defect, please contact us, we take all the responsibility and reissue it for free without hesitation. Wide application – compatible with 1989-2020 cummins 3. 9l 5. 9l 6. 7l, b series 5. 9l, especially suitable for 1989-2016 Cummins 4BT 3. 9l, isb 5. 9l 6. 7l and qsB 5. 9l 6. 7l. Function - this kit is specially used to correctly place the crankshaft sealing ring during the installation process, avoid any leakage due to uneven placement and make the work proceed in a correct and orderly manner.

Any other problem about the product, please feel free to contact us. Replacement – oe# 3824498 1338, with seal numbers 3937111 and 3904353 or the seals in kit 3802820 installed. If you are not satisified with the item, please feel free to return it back and we will refund full back to you.
BrandMekar #ad
ManufacturerMekar #ad
Part NumberMekar-20200907A

6. Bonbo

#ad

Crankshaft Rear Main Seal and Wear Sleeve Ring Installer Tool Fits for Ford 4.5L, 6.0L & 6.4L Powerstroke, Similar to 303-770, Rear Main Seal Installer Tool

#ad
Bonbo #ad - Functiondesigned to eliminate lip flare on the wear sleeve and install the crankshaft rear seal wear ring on 4. 5l, 6. 0l & 6. 4l powerstroke engine properly. Benefitthis rear main seal installer tool can help you install the crankshaft wear ring, rear seal and rear seal carrier effortlessly.

Applicationfits for ford 2003-2010 f-250, e-350, f-750 2004-2010 e150, e-250, excursion 2004-2007 f-650, f350, e-450, f-450, and low cab forward 4.55l, f-550, 6. 0l, 6. 4l and vt365-maxxForce7 Navistar International. Prevent your seal from leaking. The wear ring is automatically installed to the proper depth. Great value & convenientmake you easy to replace ztse4515C ZTSE4515 OE Part Number 303-770 for saving your time and money. High quality materialmade from quality carbon steel, impact resistance, great strength, rust and corrosion resistance, sturdy and durable.
BrandBonbo #ad
ManufacturerBonbo #ad
Part NumberB-303-770

7. OTC

#ad

OTC Tools 5887 Crankshaft Seal and Wear Sleeve Installer Tool for Detroit Diesel Series 60 and 2-Cycle 92 Engines

#ad
OTC #ad - Tool installs the front and rear crankshaft wear sleeves and seals. Similar to j-35686-b; Made in the USA. Otc crankshaft seal and wear sleeve Installer for Detroit Diesel Series 60 and 2-cycle 92 engines. Eliminates lip flare on the wear sleeve and installs the seal properly, ensuring superior sealing and longevity. Crafted from high-grade materials to ensure quality performance over the lifetime of the tool.
BrandOTC #ad
ManufacturerOTC #ad
Weight21.5 Pounds
Part Number5887
Model5887
WarrantyPer Contract with Amazon

8. CTA Tools

#ad

Blue, CTA Tools 7643 BMW Crankshaft Seal Removal Kit

#ad
CTA Tools #ad - Services n40, n42, n52k, n52, n45t, n45, n53, n46, n46t, n54 & N55. Item package Weight: 7. 25 pounds. Removes and installs Front and Rear Crankshaft Seal. Comparable to bmw factory tool 119 220, 119 230, 119 235 & 110 370 .
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Weight7.25 Pounds
Part Number7643
Model7643
Warrantysee manufacturer site

9. Oni Tools

#ad

Oni Tools Rear Crankshaft Oil Seal Installer for Volvo D12 D13 D16 Truck Engine 9998238 and 9992000 OEM Alternative Drift Tool for 7" Crank Seals 20441481

#ad
Oni Tools #ad - Direct replacement to oem drift tool 9998238 and 9992000 Use 9990166-88880013 for 7" crank seal 85108352. This specialty tool was designed to work for volvo d12, d16, d13, a, b and c engines with 7" crank seal 20441481.

You may also use this tool or 9990166-88880013 for 7" crank oil seal 1543896. Oni tools ensures quality products and stands behind top of the line manufacturing. To install 6" crank oil seal 20441697, tool 88800561 most be used. Heavy duty steel structure machined, welded and finished with powder coating to resist corrosion and ensure a long-term and reliable performance. We guarantee our products to last and offer support along the way. Also use 9990166-88880013 and 88800619 for 7" crank seal 22191895.
BrandOni Tools #ad
ManufacturerOni Tools #ad
Height12 Inches
Length13.5 Inches
Width3.5 Inches
Part NumberONI207T

10. DPTOOL

#ad

DPTOOL Crankshaft Seal Removal Kit,Crankshaft Front and Rear Oil Seal Remover and Installer Kit Compatible with BMW N40 N42 N45 N45T N46 N46T N52 N53 N54 N55 Engine

#ad
DPTOOL #ad - Material: made of carbon steel, high quality which can ensure a longer service lifetime. As fit as oem: made of heavy duty steel, and all tools put in a suicase, the exterior is coated with antioxidant layer to prevent rust, bear high-intensity pressure not easy to deformation and fracture, high hardness and strong, extended service life, easy to carry and storage.

Function: this crankshaft seal remover installer function as same as the OEM, which could accurate fit N40 N42 N45 N45T N46 N46T N52 N53 N54 N55 engine. Application: this crankshaft seal removal kit compatible with bmw n40 n42 n45 n45t n46 n46t n52 n53 n54 n55 engine, oem equivalent Part Number: 119181 119182 119183 119184 119185 119220 119230 110370 . 12 months warrranty: we offer 12 months warranty, we will replace or refund, if our tool have any quality problem.
BrandDPTOOL #ad
ManufacturerDAPENG AUTO TOOLS CO., LTD #ad
Part NumberHT2017
ModelHT2017