Pentek 158110 3/8″ #5 Slim Line Clear Filter Housing

#ad
#ad
Pentair Industries 3/8"#5 CL & BL W/PR 12/ #ad - Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. It has an initial pressure drop of 2 pounds per square inch psi at a flow rate of 5 gallons per minute gpm, a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F 51.

7 degrees C. The sump is made of clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. Initial pressure drop of 2 psi at a flow rate of 5 gpm. This pentek 158110 3/8" #5 slim line clear filter housing is suitable for low-flow applications that have space restrictions.

Pentek 158110 3/8" #5 Slim Line Clear Filter Housing #ad - Water filters are used in a wide range of applications, industrial processes, and irrigation, including drinking water purification, swimming pools, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the maximum flow rate, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Maximum temperature of 125 degrees F 51.

More information about Pentair Industries 3/8"#5 CL & BL W/PR 12/ #ad

Pentek C2 Carbon-Impregnated Cellulose Filter Cartridge, 4-7/8" x 2-1/2", 5 Micron

#ad
#ad
Pentair Industries C2 #ad - The cartridge is made of cellulose media that has been impregnated with powdered activated carbon PAC, with a polyester backing and external polyethylene netting for strength. Initial pressure drop of 2 psi at a flow rate of 2 gpm. This pentek c2 carbon-impregnated cellulose filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water.

For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Reduces fine sediment and chlorine taste and odor in residential drinking water. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Pentek C2 Carbon-Impregnated Cellulose Filter Cartridge, 4-7/8" x 2-1/2", 5 Micron #ad - Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 50%. H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. It has a nominal filtration rating of 5 microns at an efficiency of 85%. Water filters are used in a wide range of applications, swimming pools, industrial processes, and irrigation, including drinking water purification, among others.

More information about Pentair Industries C2 #ad


Similar products



Hydronix SDC-25-0501 NSF Sediment Filter 2.5" OD X 4 7/8" Length, 1 Micron

#ad
#ad
Hydronix SDC-25-0501 #ad - This coreless filter has an outside diameter OD of 2. 5" and overall length of 4-7/8". It is made of polypropylene which can be sterilized, has dimensional stability, and is resistance to most chemicals. Water filters are used in a wide range of applications, including drinking water purification, and irrigation, industrial processes, swimming pools, among others.

Hydronix water technology is a supplier of water filtration, purification and separation products. Meets ansi/nsf standard 42 certification and FDA approval, for material requirements only. It is certified by the american national standards Institute and National Sanitation Foundation ANSI/NSF Standard 42 for quality assurance, and is FDA approved, for the material requirements only.

Hydronix SDC-25-0501 NSF Sediment Filter 2.5" OD X 4 7/8" Length, 1 Micron #ad - Particle retention size of 1 micron. The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Initial pressure drop of 2 psi at a flow rate of 2 gpm. The company, founded in 2010, is headquartered in Chino Hills, CA. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C.

More information about Hydronix SDC-25-0501 #ad


Similar products



Pentek CBC-5 Carbon Block Filter Cartridge, 40 to 180 degrees F

#ad
#ad
Pentek CBC-5 #ad - Capacity: 20, 000 gallons at 2 gpm. Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable. Initial pressure drop of 2 psi at a flow rate of 2 gpm. Product demensions: 9-3/4 x 2-7/8" 248 x 73 mm. 2. 5" od and an overall length of 4-7/8". Filtration Rating: 05 micron. Reduces fine sediment and chlorine taste and odor in residential drinking water.

Pentek CBC-5 Carbon Block Filter Cartridge, 40 to 180 degrees F #ad - Meets ansi/nsf standard 42 certification and FDA approval, for material requirements only. Sediment filter for a water filtration system. Temperature range: 40 to 180 degrees F. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Particle retention size of 1 micron.

The pentek cbc-10 carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Nominal filtration rating of 5 microns.

More information about Pentek CBC-5 #ad


Similar products



RPI Triton X-100, Scintillation Grade Liquid Surfactant, 500 Milliliter Bottle

#ad
#ad
RPI, Corp. #ad - Appearance: Clear viscous liquid, slight yellow tint. Filtration Rating: 05 micron. Temperature range: 40 to 180 degrees F. Our iso 9001:2015 and iso gmp certifications are a testament to our dedication to quality. Shelf life: 18 Months. Specifications: appearance: clear viscous liquid, slight yellow tint cloud pt 1% in H2O: 63 - 67 oC Color, PTCO: ≤ 60 Shelf life: 18 Months The RPI brand has been serving the scientific community since 1970

RPI Triton X-100, Scintillation Grade Liquid Surfactant, 500 Milliliter Bottle #ad - Product is sold for research or further manufacturing use only, not for food or drug use. Size: 500 ml. Initial pressure drop of 2 psi at a flow rate of 2 gpm. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Meets ansi/nsf standard 42 certification and FDA approval, for material requirements only.

Nominal filtration rating of 5 microns. Capacity: 20, 000 gallons at 2 gpm. Grade: Scintillation Grade. It is specifically intended for use in liquid scintillation counting applications. Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable.

More information about RPI, Corp. #ad


Similar products



Fits WaterPur CCI-5-Ca used in the Used in the CCI-5-CLW12 WaterPur - 2 pack by CFS

#ad
#ad
CFS CFS-19 #ad - Fits waterpur cci-5-ca used in the used in the CCI-5-CLW12 WaterPur by CFS. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Initial pressure drop of 2 psi at a flow rate of 2 gpm. Grade: Scintillation Grade. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength.

Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable. Temperature range: 40 to 180 degrees F. Filtration Rating: 05 micron. Meets ansi/nsf standard 42 certification and FDA approval, for material requirements only. Shelf life: 18 Months. Product is sold for research or further manufacturing use only, not for food or drug use.

Fits WaterPur CCI-5-Ca used in the Used in the CCI-5-CLW12 WaterPur - 2 pack by CFS #ad - Size: 500 ml. 2 pack of pentek c2 filters that are compatible with the WaterPur CCI-5-CA. Nominal filtration rating of 5 microns. Please note this is a compatible spare part and the manufacturers' names and part numbers have been used for reference purposes only. Constructed of a carbon impregnated cellulose media, these dual-purpose cartridges filter out fine sediment particles and reduce unwanted taste, odor and chlorine taste and odor from your tap water.

More information about CFS CFS-19 #ad


Similar products



Pentek P5-478 Spun Polypropylene Filter Cartridge, 4-7/8" x 2-3/8", 5 Microns

#ad
#ad
Pentair Industries P5-478 #ad - Nominal filtration rating of 5 microns. 2 pack of pentek c2 filters that are compatible with the WaterPur CCI-5-CA. It has a nominal filtration rating of 5 microns at an efficiency of 85%. Reduces sand, commercial, and rust particles in residential, silt, scale, and municipal drinking water. Nominal filtration rating of 5 microns.

The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Product demensions: 9-3/4 x 2-7/8" 248 x 73 mm.

Pentek P5-478 Spun Polypropylene Filter Cartridge, 4-7/8" x 2-3/8", 5 Microns #ad - Temperature range: 40 to 180 degrees F. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Initial pressure drop of 2 psi at a flow rate of 2 gpm. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable. It has an initial pressure drop of 0

More information about Pentair Industries P5-478 #ad


Similar products



Banjo HB038 Polypropylene Hose Fitting, Adapter, 3/8" NPT Male x 3/8" Barbed

#ad
#ad
Banjo Corporation #ad - Grade: Scintillation Grade. Fits waterpur cci-5-ca used in the used in the CCI-5-CLW12 WaterPur by CFS. Reduces fine sediment and chlorine taste and odor in residential drinking water. Glass-reinforced polypropylene for rigidity, lightweight, corrosion, and resistance to heat, dimensional stability, most chemicals, and high impact.

Integral hex nut for using a wrench to tighten the fitting. Nsf certified Filters. The company, is headquartered in Crawfordsville, founded in 1995, IN. Shelf life: 18 Months. Temperature range: 40 to 180 degrees F. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Adapter for connecting pipes or hoses of different types.

Banjo HB038 Polypropylene Hose Fitting, Adapter, 3/8" NPT Male x 3/8" Barbed #ad - Nominal filtration rating of 5 microns. The barbed connection creates a tight seal on a tube or hose, and the male National Pipe Taper NPT threaded end connects with a female NPT threaded connection. Appearance: Clear viscous liquid, slight yellow tint. They are made of brass, and other materials that resist corrosion, stainless steel, pressure, galvanized steel, and wear.

Hose fittings are used in systems such as air compressors, and tire installation in industries including agriculture, automatic manufacturing operations, road construction, firefighting, mining, aircraft controls, and aviation.

More information about Banjo Corporation #ad


Similar products



Anderson Metals 57001 Brass Hose Fitting, Adapter, 3/8" Barb x 3/8" NPT Male Pipe

#ad
#ad
Anderson Metals 57001-0606 #ad - Maximum working pressure of 150 psi at 70 degrees F. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Adapter for connecting pipes or hoses of different types. Capacity: 20, 000 gallons at 2 gpm. Connects a hose on one end and a female NPT threaded connection on the other. Product is sold for research or further manufacturing use only, not for food or drug use.

Size: 500 ml. The company, founded in 1951, is headquartered in Kansas City, MO. Nominal filtration rating of 5 microns. Temperature range: 40 to 180 degrees F. Filtration Rating: 05 micron. And its territories. Appearance: Clear viscous liquid, slight yellow tint. Hose fittings have various types of connections, including threaded, barbed, dry disconnect, push-to-connect, and others including those based on internationally-accepted specifications.

Anderson Metals 57001 Brass Hose Fitting, Adapter, 3/8" Barb x 3/8" NPT Male Pipe #ad - Adapter for connecting a hose to a male threaded connection of a different diameter. Shelf life: 18 Months. 2 pack of pentek c2 filters that are compatible with the WaterPur CCI-5-CA. Initial pressure drop of 2 psi at a flow rate of 2 gpm.

More information about Anderson Metals 57001-0606 #ad


Similar products



The Curated Chemical Collection - Laboratory-Grade Denatured Ethyl Alcohol, 95%, 500mL

#ad
#ad
Innovating Science #ad - Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Capacity: 20, 000 gallons at 2 gpm. For more information, refer to the Safety Data Sheet. Not for drug, food or household use. Not for food, drug, or home use. Laboratory-grade material for lab and research use. Maximum working pressure of 150 psi at 70 degrees F.

This is a high quality chemical product manufactured in the United States. This chemical is designed for lab or educational use only. Connects a hose on one end and a female NPT threaded connection on the other. Hose barb on one end and male NPT threads on the other. Heed all warnings on chemical label. For laboratory Use Only.

The Curated Chemical Collection - Laboratory-Grade Denatured Ethyl Alcohol, 95%, 500mL #ad - Used as a solvent. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Adapter for connecting pipes or hoses of different types. Fits waterpur cci-5-ca used in the used in the CCI-5-CLW12 WaterPur by CFS. Reduces sand, and rust particles in residential, silt, scale, commercial, and municipal drinking water.

More information about Innovating Science #ad


Similar products



Triton X-100 Surfactant 500ml High Purity

#ad
#ad
Consolidated Chemical & Solvents LLC #ad - Initial pressure drop of 2 psi at a flow rate of 2 gpm. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Adapter for connecting pipes or hoses of different types. Particle retention size of 1 micron. Maximum working pressure of 150 psi at 70 degrees F. Laboratory-grade material for lab and research use.

Filtration Rating: 05 micron. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. Triton x-100 c14h22oc2h4On is a nonionic surfactant. Triton x-100 c14h22oc2h4on is a nonionic surfactant which has a hydrophilic polyethylene oxide chain on average it has 9. 5 ethylene oxide units and an aromatic hydrocarbon lipophilic or hydrophobic group.

Triton X-100 Surfactant 500ml High Purity #ad - Glass-reinforced polypropylene for rigidity, dimensional stability, most chemicals, corrosion, and resistance to heat, lightweight, and high impact. Integral hex nut for using a wrench to tighten the fitting. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Product is high purity 99%, This product is Not Diluted.

Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable. Initial pressure drop of 0

More information about Consolidated Chemical & Solvents LLC #ad


Similar products