Partsam 2pc Submersible Square Red White LED Stop Turn Tail License Brake Trailer Light kit Sealed 12V for Camper Truck RV Boat Snowmobile Under 80″ Inch Marine

Features: 15 diodes red led combination stop turn tail light-curb side 19 diodes 15 red+4 white led combination stop turn tail light-street side with license illuminator high visibility safety lights are easy to mount Add or upgrade the lights on boat, or utility trailer Includes one pair multi-functions tail lights, TWO sides work, THREE sides work, front side works and is high brightness White+ Brown, camper, parts pack with all fasteners and commectors needed for installation Wire Connection Tips: Left side: White Wire - Ground White+ Red, snowmobile, front side works with high brightness White+Brown, front side is low brightness Right side: White Wire - Ground White+Red, front side is low brightness.

Super bright LED lights provide maximum visibility and safety. Fully operable in inclement weather, or utility trailer; high visibility safety lights are EASY TO INSTALL and the wiring details are in the description part; completely sealed and submersible, snowmobile, these heavy duty trailer lights are tough and durable for the long term.

Tips】 partsam is the only authorized seller of partsam products. If you receive a product that does not arrive branded PARTSam on or not in a PARTSam packaging with logo, please contact that seller for a refund as it is a counterfeit PARTSam product. Partsam pairs left and right LED Red Waterproof Stop turn tail brake license plate Lights.

Application: universal for trucks, semi-trailer, boat, tractors, bus, trailers under 80", special vehicle, Dump Truck, etc. Tips: there is one more white light on the left side.

---

Wesbar 707261 Wishbone Style Trailer Wiring Harness with 4-Flat Connector

4 way trailer wiring harness, 25 foot length with 3 foot ground wire. Trailer endwishbone harness3 ft. Wishbone design for superior trailer installation. Ground. Limited 1 Year Warranty. Color coded 18 gauge bonded wires. 4-way trailer wiring Harness, 25 foot length with 3 foot ground wire. 4-way flat trailer end connectors, wishbone style4-way flat 25 ft.

Color coded 18 gauge bonded wires. Conforms to sAE J1128 specification.


Similar products

---

Partsam Red Clearance ID BAR Marker Light 3 Light 9 LED Trailer Sealed Stainless Steel, Sealed 3-Light Truck Trailer Identification LED Light Bar Red Led Strip w/Black Base

Partsam is one of the largest automotive aftermarket marker lights providers in North America. Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8. 46''; installation scews are included. Wishbone design for superior trailer installation. Limited 1 Year Warranty. You can find all the marker lights you need in partsam! partsam 3-led bar light Red, Stainess Steel Black BASE SEALED Specfs: Led Qty: 3-LEDs in each light, 3 lights totally 9LEDs.

Conforms to sAE J1128 specification. 4-way trailer wiring Harness, 25 foot length with 3 foot ground wire. Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide. Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, boat trailer, RV, cargo trailer, horse trailer, camper trailer, motorhome etc.

Sealed, three-light, 3-leds each light, totally 9LEDs, waterproof; Surface mount, Red Lens Red Light. East to install: the light contains a single lead wire for power and is grounded through the mounting hardware. Package includes: 1 x red id bar light marker 4 way trailer wiring harness, 25 foot length with 3 foot ground wire.

Three sealed fully waterproof lamps are fastened on to a stainless steel bar. Color coded 18 gauge bonded wires.


Similar products

---

Partsam 2x Trailer Truck Surface Mount LED Oval 2.5" Amber Side Marker Lamp Bulb 2 Diodes, Boat Marine LED Courtesy Lights, 2.5 Inch Trailer led clearance and side marker lights

4-way trailer wiring Harness, 25 foot length with 3 foot ground wire. Anyone of the three screws is the Negative and Red wire is the Positive end. You can find all the marker lights you need in partsam!features: color: amber led: 2 diodes light emitting diodes built-in circuit for 12V DC Power Input Mounts with 2 screw holes Surface mount Oval Side Marker Lamp Bulb High performance LED, long lifespan, superior illumination & stability High luminous efficiency with high brightness light outputDimension: Light Size: Length x Width x Height :65mm x 26mm x 18mm 2.

56'' x 1. 02'' x 071'' hole distance: 46mm 1. 81'' wire length: 150mm 6'' 2 wire Connection: White is Negative and Black is Positive. Package includes: 2 x Amber 2. 5 inch side markers 4 way trailer wiring harness, 25 foot length with 3 foot ground wire. Customers speak highly of our marker lights thanks to our continuous efforts.

In the past five years, we were devoted to improving our marker quality, expanding our marker types, adopting the latest technology, delivering the best marker lights for our customers and making them enjoy the best ever shopping experience. Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide.

Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, camper trailer, horse trailer, RV, cargo trailer, boat trailer, motorhome etc. Sealed, three-light, 3-leds each light, waterproof; Surface mount, totally 9LEDs, Red Lens Red Light.


Similar products

---

Partsam 2 Pcs LED Light 2 Diode AMBER Universal Surface Mount Clearance Side Marker Trailer Size: 2.53 x 1.06 x 0.71 inch

Thank you! ** fearures: mini-sealed LED Surface mount design in Amber lens/Amber diodes for clearance, side marker or identification light. Dimension: 64mm x 27mm x 18 mm 2. 53 x 1. 06 x 071 inch package includes: 2 x universal amber Side/Fender Markers no screws 4 way trailer wiring harness, 25 foot length with 3 foot ground wire.

Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide. Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, horse trailer, boat trailer, RV, cargo trailer, camper trailer, motorhome etc.

Sealed, totally 9leds, waterproof; Surface mount, three-light, 3-leds each light, Red Lens Red Light. East to install: the light contains a single lead wire for power and is grounded through the mounting hardware. Anyone of the three screws is the Negative and Red wire is the Positive end. Partsam 2x amber mini-sealed LED Surface mount design in for clearance, side marker or identification light.

Two-wire design includes both lead wire and ground wire for mounting to all surfaces; EASY TO INSTALL: WHITE wire is the ground. Size: 64mm x 26mm x 18mm 2. 52'' x 1.


Similar products

---

ONLINE LED STORE 4-Way Flat Wishbone-Style Trailer Wiring Harness Kit 25' Male & 4' Female 18 AWG Color Coded Wires SAE J1128 Rated with 4 Flat Connector for Under or Over 80" Wide Trailers

Partsam 2x amber mini-sealed LED Surface mount design in for clearance, side marker or identification light. Two-wire design includes both lead wire and ground wire for mounting to all surfaces; EASY TO INSTALL: WHITE wire is the ground. Size: 64mm x 26mm x 18mm 2. 52'' x 1. 02'' x 07''; hole distance: 46mm 1.

8''. To further simplify the installation process, our kit features color coded 18 AWG wires for safely determining each wire’s function. Superior quality guaranteed by a generous WarrantyThis 4-way flat wishbone style trailer harness kit is constructed from the highest quality materials and undergoes stringent quality assurance checks before leaving the factory.

4-way trailer wiring Harness, 25 foot length with 3 foot ground wire. For additional peace of mind, we offer a generous 2 year warranty to ensure your complete satisfaction. Features:male side 25′ & female side 4′ included in kitlong total wiring length makes kit suitable for trailers under & over 80″ wideColor coded 18 AWG wiresSAE J1128 ratedWishbone-style wiring setup 4 way trailer wiring harness, 25 foot length with 3 foot ground wire.

Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide. Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, cargo trailer, RV, camper trailer, boat trailer, horse trailer, motorhome etc.

Sealed, three-light, totally 9leds, waterproof; Surface mount, 3-leds each light, Red Lens Red Light.


Similar products

---

Partsam 2 Amber 3 LED Square Stud Mount Clearance Side Marker Lights Trailer Camper w reflex

Wishbone design for superior trailer installation. This amber lens is reflectorized, meaning that a separate reflector is not needed. Functions as both a marker and clearance light when mounted properly. Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8. 46''; installation scews are included.

Partsam 2 x amber Side marker, clearance light, led marker light. Commonly used on trailers, trucks, RV, heavy Duty Trucks, motorhome, golf cart etc. Partsam 2x amber mini-sealed LED Surface mount design in for clearance, side marker or identification light. Two-wire design includes both lead wire and ground wire for mounting to all surfaces; EASY TO INSTALL: WHITE wire is the ground.

Size: 64mm x 26mm x 18mm 2. 52'' x 1. 02'' x 07''; hole distance: 46mm 1. 8''. Stud mount. This square light can be used as a clearance light or side marker light with side reflex. Color coded 18 gauge bonded wires.


Similar products

---

Partsam 2PCS 3 Leds Truck Trailer Front Rear LED Side Marker Lights indicator Lamp Sealed & Waterproof Surface Mounted Installation Amber 3.9"

Usage: universal for Any 12V Vehicles, esp truck Trailers. Amber orange rectangle clearance or side marker lights. 2-4/5" l x 2" w x 1-1/8" d; reflectorized lens; corrosion resistant; mount on stud; 2-wire; 3 LEDs. You can find all the marker lights you need in Partsam! Partsam 2pcs 3. 9" rectangle lamp lED for Trailer, LED light.

Partsam offers an extensive line of high quality marker lights for car, van, truck, caravan, camper, boat, RV, bus, lorry, trailer, etc. Limited 1 Year Warranty. Color coded 18 gauge bonded wires. Anyone of the three screws is the Negative and Red wire is the Positive end. Wishbone design for superior trailer installation.

Lens is welded to housing to form a single unit. Package includes: 2 x Amber 3. 9" marker lights 4 way trailer wiring harness, 25 foot length with 3 foot ground wire. Features: - amber color w/ 3led - marker light - Functions as side marker or clearance light - Can be used as a combination clearance and side marker if properly mounted.

4-way trailer wiring Harness, 25 foot length with 3 foot ground wire. Size: 363mm x 30mm x 29mm 14. 3'' x 1.


Similar products

---

Trailer Light Cable Wiring Harness 50ft spools 14 Gauge 7 Wire 7 colors

Perfect for Car Audio, Insulated, Automotive. Excellent for any 6 vOLT - 80 VOLT application. Stud mount. This square light can be used as a clearance light or side marker light with side reflex. 4-way trailer wiring Harness, 25 foot length with 3 foot ground wire. Conforms to sAE J1128 specification. Stranded Copper Clad Aluminum.

. Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide. Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, cargo trailer, camper trailer, boat trailer, RV, horse trailer, motorhome etc.

Sealed, totally 9leds, three-light, 3-leds each light, waterproof; Surface mount, Red Lens Red Light. East to install: the light contains a single lead wire for power and is grounded through the mounting hardware. Amber orange rectangle clearance or side marker lights. 2-4/5" l x 2" w x 1-1/8" d; reflectorized lens; corrosion resistant; mount on stud; 2-wire; 3 LEDs.

Partsam 2x amber mini-sealed LED Surface mount design in for clearance, side marker or identification light. Two-wire design includes both lead wire and ground wire for mounting to all surfaces; EASY TO INSTALL: WHITE wire is the ground. Size: 64mm x 26mm x 18mm 2.


Similar products

---

Hopkins 20099 Engager LED Test Break Away System with Battery Meter

Activates trailer brakes upon separation from tow vehicle. The system as a whole includes a break away switch, cable, and three mounting bolts. Remote, turn on, Hook Up Wire. Flexible, home theatre, and jacketed in PVC. The built-in battery charger charges the battery while connected with the tow vehicle. Anyone of the three screws is the Negative and Red wire is the Positive end.

Wishbone design for superior trailer installation. Perfect for Car Audio, Insulated, Automotive. Excellent for any 6 vOLT - 80 VOLT application. This amber lens is reflectorized, meaning that a separate reflector is not needed. The two-wire design includes the lead and ground wires to mount to any surface. Partsam 2xamber 12v 3.

9 inch led front rear Marker Lights, stainless screws for installation are included. Function as led marker light, auto side Lamps, clearance light, identification light, trailer Light etc. Waterproof & sealed light Lens, apply for left right front rear Roof Top clearance lighting. Universal fits for 12v vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.

Light size: 98mm x 31mm x 26mm 3.


Similar products

---

CZC AUTO Aluminum Trailer License Plate Light Bracket

Stud mount. This square light can be used as a clearance light or side marker light with side reflex. Features built-in battery charger that charges battery while it's plugged into the vehicle. Activates trailer brakes upon separation from tow vehicle. Perfect for Car Audio, Insulated, Automotive. Excellent for any 6 vOLT - 80 VOLT application.

Czc auto brand aluminum license plate bracket designed for replacing your plastic license plate bracketadvantage :More sturdy，long years lifetime and No rusting Exclusive and shinny looks for your trailer Blue film to cover the front and back sides of aluminum tread surface for protecting shinny surface and no crash! Just peel off film before install it Standard size for almost trailer and truck license plate light bracket 4 way trailer wiring harness, 25 foot length with 3 foot ground wire.

Exclusive and shinny looks for your trailer. Amber orange rectangle clearance or side marker lights. 2-4/5" l x 2" w x 1-1/8" d; reflectorized lens; corrosion resistant; mount on stud; 2-wire; 3 LEDs. Anyone of the three screws is the Negative and Red wire is the Positive end. Leds indicate when battery is fully charged, when it needs to be re-charged, or while it is charging.

. Conforms to sAE J1128 specification.


Similar products