Park Tool FR-2 Freewheel Remover SunTour 2 Notch

#ad
#ad
Park Tool FR-2 #ad - Thin wall construction allows use without removal of cones and locknuts Fits older Sun Tour two notch freewheels. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Not recommended for Sun Tour four to six notch freewheels.

Park Tool FR-2 Freewheel Remover SunTour 2 Notch #ad - Always use a skewer or axle nut to hold remover firmly in place. Heat treated alloy tool steel, one inch base fits wrench or bench vise.

More information about Park Tool FR-2 #ad

500 Piece Assorted Loose Bicycle Bearing Balls 1/8", 5/32", 3/16" 7/32" & 1/4"

#ad
#ad
BC Precision BCBIKE5 #ad - Throughout the manufacturing process, statistical process control assures tolerance accuracy, fine surface finish and consistent high quality. Chrome steel balls offer the precise geometry and fine surface finish that makes them especially useful for bicycles, drawer slides, casters, door locks and many other applications.

Modern furnaces with precisely controlled atmospheres and temperatures are used for heat treating to assure uniform hardness and proper microstructure for each stainless steel ball. The finest quality chrome steel produced in accordance with the highest industry standards. 100 balls each of the following sizes: 1/8", 5/32", 3/16" 7/32" & 1/4".

500 Piece Assorted Loose Bicycle Bearing Balls 1/8", 5/32", 3/16" 7/32" & 1/4" #ad - These high precision G25 ball bearings are hot forged from bar stock. Precision grade G25 balls. Aisi 52100 chromium steel. Each size is individually packaged and labeled see photos.

More information about BC Precision BCBIKE5 #ad


Similar products



Park Tool FR-3 Freewheel Remover: SunTour 4 Notch

#ad
#ad
Park Tool FR-3 #ad - Precision grade G25 balls. Each size is individually packaged and labeled see photos. Aisi 52100 chromium steel. 100 balls each of the following sizes: 1/8", 5/32", 3/16" 7/32" & 1/4". Heat treated alloy tool steel, one inch base fits wrench or bench vise. Fits all sun tour four notch freewheels since 1986. Always use a skewer or axle nut to hold tool in place for during removal.

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Always use a skewer or axle nut to hold tool in place for during removal. Fits all sun tour four notch freewheels since 1986. Thin wall construction allows use without removal of cones and locknuts.

More information about Park Tool FR-3 #ad


Similar products



Park Tool Freewheel Remover FR-1.3

#ad
#ad
Park Tool QKFR13 #ad - Fits sachs aris, sun race, dNP Epoch, and other 5-10 speed freewheels. Enlarged thruhole to accommodate 14mm axles. 100 balls each of the following sizes: 1/8", 5/32", 3/16" 7/32" & 1/4". With its 22. 6mm diameter interface and enlarged thruface, the FR-1. 3 is perfect for up to 14mm axle designs. 22. 6mm diameter.

It is compatible with sachs aris, Sun Race, DNP Epoch, and other 5-10 speed freewheels. Features: 12 splines fits sachs aris, dnp epoch, Sun Race, and other 5-10 speed freewheels Enlarged thruhole to accommodate 14mm axles 22.6mm diameter 1" x 1" x 1" hexagonal interface for 1" wrench or tool Also use with adjustable wrench Each size is individually packaged and labeled see photos.

Park Tool Freewheel Remover FR-1.3 #ad - 1" x 1" x 1". Precision grade G25 balls. The design of park Tool's Freewheel Remover FR-1. 3 is perfect for use with many e-bikes, and cogsets, which use thread-on freewheels, which require service or replacement. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.

Always use a skewer or axle nut to hold tool in place for during removal.

More information about Park Tool QKFR13 #ad


Similar products



Park Tool SPA-2 Cluster Cone Pin Spanner Red

#ad
#ad
Park Tool 109937 #ad - Park tool pin spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Always use a skewer or axle nut to hold tool in place for during removal.

Fits all sun tour four notch freewheels since 1986. 12 splines. Handle is vinyl coated to give a good grip. Adjusts to a wide range of pin hole widths, pin diameter is nominally 0090 inch2. 3mm. Pin diameter is nominally 0090" 2. 3mm. Tough, high carbon tool steel is used on each tool to ensure long life. Will fit one-key release retaining rings on shimano and campagnolo cranksets and the adjusting cone on most freewheel clusters not freehubs.

Park Tool SPA-2 Cluster Cone Pin Spanner Red #ad - Fits sachs aris, sun race, dNP Epoch, and other 5-10 speed freewheels. Enlarged thruhole to accommodate 14mm axles. 22. 6mm diameter.

More information about Park Tool 109937 #ad


Similar products



Park Tool FR-1 Freewheel Remover for Shimano Freewheels

#ad
#ad
Park Tool 118873 #ad - Each pin spanner is color coated for easy recognition. Fits shimano®, sachs Aris®, and Sun Race® freewheels. Precision grade G25 balls. Adjusts to a wide range of pin hole widths, pin diameter is nominally 0090 inch2. 3mm. Tough, high carbon tool steel is used on each tool to ensure long life. Aisi 52100 chromium steel.

Park Tool FR-1 Freewheel Remover for Shimano Freewheels #ad - Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Always use a skewer or axle nut to hold tool in place for during removal. Fits all sun tour four notch freewheels since 1986. 12 splines. 22. 6mm diameter. Handle is vinyl coated to give a good grip.

Fits sachs aris, sun race, dNP Epoch, and other 5-10 speed freewheels. Enlarged thruhole to accommodate 14mm axles. Thin wall construction allows use without removal of cones and locknuts. Heat treated alloy tool steel, one inch base fits wrench or bench vise.

More information about Park Tool 118873 #ad


Similar products



Park Tool FR-6 Freewheel Remover for BMX Bikes

#ad
#ad
Park Tool 102944 #ad - Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Always use a skewer or axle nut to hold tool in place for during removal. Fits all sun tour four notch freewheels since 1986. 12 splines. Always hold the remover secure to the hub using axle nut or quick release skewer.

1" x 1" x 1". Aisi 52100 chromium steel. The fr-6 freewheel remover is designed to remove the four-notches freewheels from BMX. 100 balls each of the following sizes: 1/8", 5/32", 3/16" 7/32" & 1/4". Handle is vinyl coated to give a good grip. Also removes single speed bikes using the standard 1. 37 x 24 tpi hub threading.

Park Tool FR-6 Freewheel Remover for BMX Bikes #ad - 22. 6mm diameter. Fits shimano, sachs Aris, and Sun Race freewheels. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. For Freewheels only.

More information about Park Tool 102944 #ad


Similar products



Cane Creek 144.7 Hoods Non-Aero Gum

#ad
#ad
Dia-Compe B144.7B #ad - Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Always use a skewer or axle nut to hold tool in place for during removal. Fits all sun tour four notch freewheels since 1986. 12 splines. Handle is vinyl coated to give a good grip.

1" x 1" x 1". Brake system color: tan, Brake Usage F/R: Front/Rear Set. Features: not compatible with "safety" levers Each size is individually packaged and labeled see photos. 100 balls each of the following sizes: 1/8", 5/32", 3/16" 7/32" & 1/4". Also removes single speed bikes using the standard 1. 37 x 24 tpi hub threading.

Cane Creek 144.7 Hoods Non-Aero Gum #ad - Always hold the remover secure to the hub using axle nut or quick release skewer. Will fit one-key release retaining rings on shimano and campagnolo cranksets and the adjusting cone on most freewheel clusters not freehubs. Aisi 52100 chromium steel. Each pin spanner is color coated for easy recognition. Fits shimano, sachs Aris, and Sun Race freewheels.

More information about Dia-Compe B144.7B #ad


Similar products



Park Tool Spoke, Bearing and Cottergauge

#ad
#ad
Park Tool 109941 #ad - Measures spoke length, bearing diameter, cotter diameter. Blue anodized aluminum. 1" x 1" x 1". This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters. Fits sachs aris, sun race, dNP Epoch, and other 5-10 speed freewheels. Enlarged thruhole to accommodate 14mm axles. Handle is vinyl coated to give a good grip.

Aisi 52100 chromium steel. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. Also removes single speed bikes using the standard 1. 37 x 24 tpi hub threading. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.

Park Tool Spoke, Bearing and Cottergauge #ad - Always use a skewer or axle nut to hold tool in place for during removal. Fits all sun tour four notch freewheels since 1986. 12 splines. Adjusts to a wide range of pin hole widths, pin diameter is nominally 0090 inch2. 3mm. Always hold the remover secure to the hub using axle nut or quick release skewer.

More information about Park Tool 109941 #ad


Similar products



Park Tool FR-4 Freewheel Remover: Atom

#ad
#ad
Park FR-4 #ad - Precision grade G25 balls. Tough, high carbon tool steel is used on each tool to ensure long life. Handle is vinyl coated to give a good grip. Always hold the remover secure to the hub using axle nut or quick release skewer. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Each pin spanner is color coated for easy recognition.

Park Tool FR-4 Freewheel Remover: Atom #ad - Aisi 52100 chromium steel. Blue anodized aluminum. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Always use a skewer or axle nut to hold tool in place for during removal. Fits all sun tour four notch freewheels since 1986.

12 splines. Also removes single speed bikes using the standard 1. 37 x 24 tpi hub threading. Fits atom, regina, splined Zeus, and some Schwinn Approved freewheels. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. 22.

More information about Park FR-4 #ad


Similar products



Park Tool PPL-1 Polylube 1000 Grease Tube 4 oz

#ad
#ad
Park Tool PPL-1 #ad - Measures spoke length, bearing diameter, cotter diameter. Tub ppl-2. Brake system color: tan, Brake Usage F/R: Front/Rear Set. Park tool's poly-urea lubricant was developed specifically for bicycle maintenance and repair. Will fit one-key release retaining rings on shimano and campagnolo cranksets and the adjusting cone on most freewheel clusters not freehubs.

Always hold the remover secure to the hub using axle nut or quick release skewer. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Always use a skewer or axle nut to hold tool in place for during removal. Fits all sun tour four notch freewheels since 1986.

Park Tool PPL-1 Polylube 1000 Grease Tube 4 oz #ad - 12 splines. Tube ppl-1 and a 16oz. Polylube 1000 also repels moisture and is compatible with conventional greases. Each pin spanner is color coated for easy recognition. Fits shimano, sachs Aris, and Sun Race freewheels. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.

More information about Park Tool PPL-1 #ad


Similar products