Datacomm 450002WH-2 2 Gang Recessed Low Voltage Cable Plate- 2 Pack

#ad
#ad
DATACOMM ELECTRONICS 450002WH-2 #ad - With these new plates you can install low voltage cables behind your flat panel TV, your amplifier flush to the wall surface. Once inside your wall the cables can be run to your entertainment cabinet, entertainment center, equipment rack or closet, computer or other location that will complete the connection.

Ensure a professional look and finish to any low-voltage cable installation using this Double Gang Recessed Wall Plate which keeps cables from hanging in plain sight. This plate mounts flush to your wall with a recessed opening that sends A/V cables, data lines, and phone lines inside the wall and out of sight.

Datacomm 450002WH-2 2 Gang Recessed Low Voltage Cable Plate- 2 Pack #ad - Can be installed with the opening facing up or down. 2 pack. Using this wall plate makes for an easy, clean way to access cables and finish the connection and installation. A second double gang Recessed Wall Plate can be purchased separately as a pair. Designed to be used with 2-gang low voltage mounting brackets made by any major manufacturer.

Allows cable management internally rather than externally.

More information about DATACOMM ELECTRONICS 450002WH-2 #ad

Black Pack of 2 - iMBAPrice Dual Gang 2-Gang Low Voltage Mounting Bracket

#ad
#ad
iMBAPrice IC-MB-2Gang-2PK #ad - Black Pack of 2 - iMBAPrice Dual Gang 2-Gang Low Voltage Mounting Bracket #ad - Dual gang 2-gang low voltage Mounting Bracket - Black Pack of 2. For use with retrofit telephone, coax, or network installations where an electrical box is not present. Adjusts to fit 1/4" to 1" thick wallboard, paneling, or drywall. Horizontal or vertical mounting. Seats wall plates that are flush with the mounting surface.

Certifications: UL and CSA Listed. Designed to mount wall plates flush. Ul listed. 2-gang.

More information about iMBAPrice IC-MB-2Gang-2PK #ad


Similar products



Arlington LV2 Low Voltage Mounting Bracket, 2-Gang, 2-Pack

#ad
#ad
Arlington Industries LV2-1CS/PACK #ad - Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Then use the bracket a s a guide for the cut out by tracing a line around the inside. The bracket is its own template. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date.

Save when you buy the 2 pack! Designed to mount wall plates flush. Labor is not included. Arlington's non-metallic, low voltage mounting brackets are the time and money-saving solution for faster and easier mounting of Class 2 communications, LV2-1CS, computer and cable TV wiring. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job.

Arlington LV2 Low Voltage Mounting Bracket, 2-Gang, 2-Pack #ad - Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. Horizontal or vertical mounting; UL/CSA listed.

Level the bracket on the wall. Designed to mount wall plates flush. Dual gang 2-gang low voltage Mounting Bracket - Black Pack of 2. Designed to mount wall plates flush.

More information about Arlington Industries LV2-1CS/PACK #ad


Similar products



DataComm 45-0001-WH 1-Gang Recessed Low Voltage Cable Plate White

#ad
#ad
Datacomm Electronics 45-0001-WH #ad - Ul listed. Made of non-breakable ABS plastic. Mounting bracket sold separately Part # 60-0021-S. Can be installed with the opening facing up or down. Save when you buy the 2 pack! Designed to mount wall plates flush. The cable plates can be installed with the opening facing up or down. Holds up to 4 cables. These plates are designed to be installed onto a low voltage mounting bracket.

Quick and easy installation. Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Horizontal or vertical mounting. Datacomm electronics’ 1-gang recessed low Voltage Cable Plates are used to install low voltage cables behind your flat panel TV, amplifier, or other audio and video devices.

DataComm 45-0001-WH 1-Gang Recessed Low Voltage Cable Plate White #ad - Etl listed in the United States and Canada. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job. Available in 5 colors. Dual gang 2-gang low voltage Mounting Bracket - Black Pack of 2. Horizontal or vertical mounting; UL/CSA listed. Available in 2-gang 45-0002 and 3-Gang 45-0003.

Designed to mount wall plates flush.

More information about Datacomm Electronics 45-0001-WH #ad


Similar products



Low Voltage 2 Gang Bracket Mount Dual Multipurpose DryWall Mounting Wall Plate - Cmple

#ad
#ad
Cmple 1081-528-N #ad - The perfect solution for concealing low voltage audio video cables behind your wall mounted flat panel TV. Dual gang low-voltage junction box backless design accommodates requirements of coaxial cables Can be installed vertically or horizontally Dual gang 2-gang low voltage Mounting Bracket - Black Pack of 2.

Low Voltage 2 Gang Bracket Mount Dual Multipurpose DryWall Mounting Wall Plate - Cmple #ad - Designed to mount wall plates flush. Mounting Screws Included. Lifetime Warranty. Can be installed with the opening facing up or down. Designed to mount wall plates flush. Mounting bracket sold separately Part # 60-0021-S. Ul listed. Non-metallic - better than metal and costs less too! For communications, cable TV, computer wiring.

Holds up to 4 cables. Save when you buy the 2 pack! Designed to mount wall plates flush. Available in 2-gang 45-0002 and 3-Gang 45-0003. Made of non-breakable ABS plastic. Horizontal or vertical mounting. Horizontal or vertical mounting; UL/CSA listed.

More information about Cmple 1081-528-N #ad


Similar products



iMBAPrice® Duag Gang 2-Gang Low Voltage Wallplate Mounting Bracket - Black Pack of 2

#ad
#ad
iMBAPrice IC-2pk-Gang-2 #ad - Holds up to 4 cables. Designed to mount wall plates flush. This low voltage mounting Bracket, 2-Gang, 1-Pack. Available in 2-gang 45-0002 and 3-Gang 45-0003. Etl listed in the United States and Canada. 1-pack of low Voltage Mounting Brackets. Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall.

Mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job. Horizontal or vertical mounting; UL/CSA listed. Dual gang 2-gang low voltage Mounting Bracket - Black Pack of 2. Can be installed with the opening facing up or down. Save when you buy the 2 pack! Designed to mount wall plates flush.

iMBAPrice® Duag Gang 2-Gang Low Voltage Wallplate Mounting Bracket - Black Pack of 2 #ad - Mounting Screws Included. Horizontal or vertical mounting; UL/CSA listed. Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Quick and easy installation. For use with network cables, coaxial cables, HDMI and speaker wires. Easy to use mounts wall plates flush with the wall. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job.

More information about iMBAPrice IC-2pk-Gang-2 #ad


Similar products



DataComm Electronics 45-0002-WH 2-Gang Recessed Low Voltage Cable Plate, White

#ad
#ad
DataComm Electronics, Inc. 45-0002-WH #ad - Easy to use mounts wall plates flush with the wall. The perfect solution for concealing low voltage audio video cables behind your wall mounted flat panel TV. Horizontal or vertical mounting. The perfect solution for concealing low voltage audio video cables behind your wall mounted flat panel TV. Available in 2-gang 45-0002 and 3-Gang 45-0003.

Etl listed in the United States and Canada. The cable plates can be installed with the opening facing up or down. Mounting bracket sold separately Part #60-0022-S. Mounting bracket sold separately Part # 60-0021-S. Designed to mount wall plates flush. Made of non-breakable ABS plastic. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job.

DataComm Electronics 45-0002-WH 2-Gang Recessed Low Voltage Cable Plate, White #ad - Save when you buy the 2 pack! Designed to mount wall plates flush. 1-pack of low Voltage Mounting Brackets. Horizontal or vertical mounting; UL/CSA listed. Available in 1-gang 45-0001 and 3-Gang 45-0003. Horizontal or vertical mounting; UL/CSA listed.

More information about DataComm Electronics, Inc. 45-0002-WH #ad


Similar products



Arlington LV2-5 Low Voltage Mounting Bracket, 2-Gang, 5-Pack

#ad
#ad
Arlington Industries LV2-5 #ad - Holds up to 4 cables. Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job. Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Can be installed with the opening facing up or down.

Mounting bracket sold separately Part # 60-0021-S. Lifetime Warranty. Adjusts to fit 1/4-inch to 1-Inch thick wall board, paneling or drywall. Designed to mount wall plates flush. Horizontal or vertical mounting; UL/CSA listed. Horizontal or vertical mounting. Etl listed in the United States and Canada. Available in 4 colors.

Arlington LV2-5 Low Voltage Mounting Bracket, 2-Gang, 5-Pack #ad - Can be installed with the opening facing up or down. Save when you buy the 2 pack! Designed to mount wall plates flush. Horizontal or vertical mounting; UL/CSA listed. Horizontal or vertical mounting; UL/CSA listed. Our mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job.

Quick and easy installation.

More information about Arlington Industries LV2-5 #ad


Similar products



Cable Matters 20-Pack Blank Keystone Jack Inserts in White

#ad
#ad
Cable Matters FBA_180066x20 #ad - Designed to mount wall plates flush. Easy to use mounts wall plates flush with the wall. Quick and easy installation. The perfect solution for concealing low voltage audio video cables behind your wall mounted flat panel TV. Etl listed in the United States and Canada. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job.

Available in 4 colors. Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Horizontal or vertical mounting; UL/CSA listed. Tidy installation provides a professional looking installation in the home or office. 1-pack of low Voltage Mounting Brackets. These keystone inserts are compatible with wall plates with standard sized keystone openings including the Cable Matters 1 to 12 Port Wall Plates.

Cable Matters 20-Pack Blank Keystone Jack Inserts in White #ad - Sturdy construction with a Lifetime Warranty These commercial grade keystone jack inserts are engineered for frequent use and built to last. Hook the bottom lip into the cut-out while holding the keystone insert at a slight angle 2. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job.

Available in 1-gang 45-0001 and 3-Gang 45-0003. Lifetime Warranty.

More information about Cable Matters FBA_180066x20 #ad


Similar products



iMBAPrice LV1-2PK Single Gang 1-Gang Low Voltage Mounting Bracket - Black Pack of 2

#ad
#ad
iMBAPrice LV1-2PK #ad - Bracket is its own template for cut-out, trace the bracket then cut the hole, includes 1 low voltage mounting brackets. Ul/csa listed 2-gang, 5-Pack. Tidy installation provides a professional looking installation in the home or office. Ul listed. Holds up to 4 cables. Sturdy snap-in construction of blank keystones provides a secure connection to prevent access or tampering into your wall plates.

Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Blank keystone jack insert fits a standard opening in a wall plate for keystone jacks. Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job.

iMBAPrice LV1-2PK Single Gang 1-Gang Low Voltage Mounting Bracket - Black Pack of 2 #ad - Available in 4 colors. Horizontal or vertical mounting; UL/CSA listed. Designed to mount wall plates flush. Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Quick and easy installation. Made of non-breakable ABS plastic.

More information about iMBAPrice LV1-2PK #ad


Similar products



Cable Matters 10-Pack Low Profile 4-Port Cat5e / Cat6 Keystone Jack Wall Plate in White

#ad
#ad
Cable Matters 180084x10 #ad - Mounting brackets offer specially designed screw holes, for a better looking, easy to install job. Available in 5 colors. Horizontal or vertical mounting. Designed to mount wall plates flush. Made of non-breakable ABS plastic. For use with network cables, coaxial cables, HDMI and speaker wires. A lifetime warranty is included with these UL Listed wall plates for peace of mind when purchasing.

Mounting brackets offer specially designed screw holes, for a better looking, easy to install job. Etl listed in the United States and Canada. Made of non-breakable ABS plastic. It accepts standard keystone jack inserts for many types of networking, video and audio cables. Low-profile cable wall plate with a cover that is almost flush with the wall; Contemporary glossy design of this Ethernet wall jack outlet provides a professional looking installation.

Cable Matters 10-Pack Low Profile 4-Port Cat5e / Cat6 Keystone Jack Wall Plate in White #ad - Mounting bracket sold separately Part # 60-0021-S. 5-pack of low Voltage Mounting Brackets. Single gang 1-gang low voltage Mounting Bracket - Black Pack of 2. Mounting bracket sold separately Part #60-0022-S. Dual low voltage backless old work bracket Orange. Designed to mount wall plates flush.

More information about Cable Matters 180084x10 #ad


Similar products